DMV Test Simulator

Which of the following are used on some highways to direct drivers into the proper lanes for turning?

Flashing red lights

Flashing yellow lights

White lines on the side of the road

White arrows in the middle of the lanes

When you need to change lanes, it is important to:

All of the above

Signal your intentions ahead of the lane change

Check your blind spot

Make sure the lane is clear before entering.

You have the right-of-way when turning left on which of the following traffic signals?

A solid green light

A flashing yellow light

A green arrow pointing left

A flashing red light

Orange is the color of signs used to communicate with drivers in construction work zones.

True

False

You come to an intersection with a flashing red light. You must:

Slow down and drive carefully through the intersection.

Turn either right or left, since the road is blocked ahead.

Stop at the intersection and wait for a flashing green light.

Stop at the intersection, then proceed as traffic allows.

When passing a cyclist, a motorist must

Move into the left lane if there is one and do so when it's reasonably safe

Move into the right lane if there is one and do so when its reasonably safe

Stay in the same lane and increase speed to get past the cyclist faster

Stay in the same lane and keep the same speed

If two drivers arrive at the same time to a four-way intersection controlled by stop signs:

The driver on the right has the right-of-way.

The driver on the left has the right-of-way.

One driver may continue driving without stopping.

One driver should honk to indicate that they are giving up the right-of-way.

A solid white line down the center of a two-lane road indicates:

Lanes are moving in opposite directions and drivers are not permitted to pass.

Lanes are moving in opposite directions and drivers are permitted to pass when it is safe to do so.

Lanes are moving in the same direction and drivers are not permitted to pass.

Lanes are moving in the same direction and drivers are permitted to pass when it is safe to do so.

When changing lanes, you can check your blind spots by:

Using the inside rearview mirror.

Using the outside rearview mirror

Using both inside and outside rearview mirrors.

Turning your head and looking over your shoulder.

47. When approaching an uncontrolled intersection, a driver should:

Maintain their speed and proceed.

Stop at the intersection, check in all directions, and proceed.

Yield to all other drivers.

Be prepared to yield.

Allow a larger space cushion than usual when stopping:

On an incline

At an intersection

At a stop sign

At a toll plaza

After stopping for a school bus that is unloading children:

Do not proceed until the children wave to you

Watch for children walking along the side of the road.

Accelerate quickly

Turn on your emergency flashers.

You cannot pass safely on a two-way, two-lane street unless

You are able to clearly see the road ahead.

You can return to your lane before meeting oncoming traffic.

Your vehicle is capable of the speed necessary to pass.

All of the above.

When preparing to turn left, drivers should:

Slow down gradually while checking their rearview mirror.

Move into the left lane.

Watch for oncoming vehicles and pedestrians.

All of the above.

At a four-way stop:

The driver to arrive first has the right-of-way.

The driver to arrive last has the right-of-way.

One driver should continue driving without stopping.

One driver should wave the other drivers ahead.

If a transit vehicle is signaling to re-enter the main roadway following a stop, you must:

Honk to let them know you’re there.

Move to the left lane.

Yield.

Speed up to pass.

When making a right turn, you should avoid _________ before starting the turn.

Using seat belts

Using signals

Swinging wide to the left

Using your mirrors

Which of the following is a safe way to drive through a curve?

Slow down as you enter, speed up as you exit.

Maintain a constant speed throughout the curve.

Speed up as you enter, slow down as you exit.

Stay near the right edge of your lane.

If traffic signals at an intersection are not functioning due to a power outage:

Park your vehicle as far off the road as possible and wait for power to be restored.

Use hand signals to indicate your intentions to other drivers.

Turn on your hazard lights and proceed through the intersection without stopping.

Treat the intersection as a four-way stop.

When approaching a steady red traffic light, drivers should:

Drive through the intersection if there is no crossing traffic.

Continue driving, as they have the right-of-way.

Stop only if a police officer is nearby.

Come to a complete stop.

A single broken yellow line down the center of a two-lane road indicates:

Lanes are moving in opposite directions and drivers are not permitted to pass.

Lanes are moving in opposite directions and drivers are permitted to pass when it is safe to do so.

Lanes are moving in the same direction and drivers are not permitted to pass.

Lanes are moving in the same direction and drivers are permitted to pass when it is safe to do so.

You may cross double solid yellow lines:

To pass a slow-moving truck.

To turn into a driveway.

To pass another car.

Under no conditions.

Before changing lanes on a multilane highway, you should:

Sound your horn.

Turn on your headlights.

Reduce your speed.

Check your mirrors and blind spots.

When a stop is required at an intersection and no markings appear to indicate a stop line or crosswalk, a driver:

Is not required to stop.

Is required to slow down to make sure crossing traffic is clear.

Should stop where they have a clear view of approaching traffic before they enter the intersecting roadway.

Should stop only a place where they can see at least 200 feet on either side, even if they have to enter the intersecting roadway

When approaching a roundabout, you should always:

Increase your speed.

Maintain your speed.

Come to a complete stop.

Decrease your speed.

You are waiting in the intersection to complete a left turn. You should:

Signal and keep your wheels turned to the left.

Signal and keep your wheels straight.

Flash your headlights so drivers will let you through.

Drive around the rear of a car if it blocks you.

A work zone:

May be moving or stationary.

Is marked with black and white signs.

Does not require a driver to slow down and pay extra attention.

All of the above.

You come to an intersection that is blocked by other traffic. You should:

Go slowly until the traffic ahead moves.

Get as close as possible to the car in front of you.

Stay out of the intersection until you can pass through.

Sound your horn to make the cars move up.

Unlock and Upgrade

Remove all limits from your Quizzes

DMV Test Simulator

More Quizzes