RuleBook Test
RuleBook Test: Engine and Safety Regulations Quiz
Test your knowledge of engine rules and safety protocols with our comprehensive quiz designed for enthusiasts and competitors alike. Whether you're a team member or a follower of motorsports, this quiz will challenge your understanding of essential regulations.
- Multiple choice questions
- Covering various aspects of engine specifications
- Aim to reinforce safety measures in motorsport
The only allowed sequences of components for turbo charged or supercharged engines-
Restrictor, Compressor, Throttle body, Engine
Restrictor, Compressor, Throttle body
Restrictor, Throttle body, Compressor, Engine
Compressor, restrictor, Engine
All aerodynamic devices must not extend ___________ from the rearmost part of the rear tires.
Further rearward than 25 mm
Further rearward than 25 cm
Further forward than 250 mm
Further rearward than 25 m
Failure of team member to follow an instruction or command directed specifically to that member or the team will result in
Disqualification
Penalty of 25 points
Penalty of 15 points
Elimination from dynamic events
The throttle actuation system must use ______ return springs.
At least 2
At most 2
Maximum 2
Minimum 1
The contact point of the back of the driver's helmet on the head restraint is no less than _________ from any edge of the head restraint.
50 mm
500 mm
50 cm
5 mm
Lap belts with “pull up” adjusters are recommended over “pull-down” adjusters.
True
False
In Business Plan Presentation Event, Pitch Deck, Content, Delivery contains respectively _________ points
10, 5, 10
10, 20, 10
5, 10, 20
10, 10, 10
If the lap belts and anti-submarine belts are attached less than 100 mm apart, these must support a total load of ______
8.5 N
19.5 KN
9.5 N
19.5 KN
The vehicle that has been overtaken may re-enter the track when the track marshal who is in charge of that passing zone is showing the:
Yellow flag
Black flag
Blue flag
Green flag
The hard copy of CRD must be in a ring binder with
DIN A4 pages
DIN A3 pages
DIN A4 sheets
A2 pages
The “ON” position of the master switch must be in the horizontal position
True
False
Liability waiver is required to be signed by
Faculty Advisor
Team Members
Anyone above 16 yrs
Team Members including Faculty Advisor
Seated in a normal driving position, the driver must have a ________ field of vision of ___
Minimum, 100 deg
Minimum, 200 deg
Maximum, 100 deg
Minimum, 200 deg
The tilt test will be conducted with the smallest driver fully strapped in normal driving position.
True
False
Multimeter with protected probe tips and _______ test leads rated for 1000 V CAT III or better
Two 2 mm banana plugs
Two 4 mm banana plugs
Two 4 mm plugs
Two 4 mm toggle switch
{"name":"RuleBook Test", "url":"https://www.quiz-maker.com/QPREVIEW","txt":"Test your knowledge of engine rules and safety protocols with our comprehensive quiz designed for enthusiasts and competitors alike. Whether you're a team member or a follower of motorsports, this quiz will challenge your understanding of essential regulations.Multiple choice questionsCovering various aspects of engine specificationsAim to reinforce safety measures in motorsport","img":"https:/images/course8.png"}