Audiocodes - SBC 7.0 - Essentials & Configuration - Oct07 2016 - Exam | Take the Quiz

Generate an image of a modern, sleek telecommunications setup featuring AudioCodes E-SBC devices in a professional office environment, with a focus on network management and configuration.

Master the Essentials of AudioCodes E-SBC 7.0

Test your knowledge on the essentials and configuration of the AudioCodes E-SBC 7.0! This quiz covers a variety of topics related to the deployment and management of the SBC, ensuring you gain a comprehensive understanding of its features and functionalities.

Whether you are looking to enhance your skills or prepare for certification, this quiz includes:

24 challenging questions
Multiple choice and open-ended formats
Insights on practical applications and best practices

24 Questions6 MinutesCreated by ConfiguringSBC751

The AudioCodes E-SBC solution uses B2BUA to provide additional network features. Which of the following is a B2BUA feature?

A) "Packet Inspection"

B) "Black and White lists"

C) "Rogue Packet Inspection"

D) "Independent Route/Record Route for each leg"

Which of the following components is considered part of a defined Media Realm?

A) "IP Group"

B) "SRD"

C) "RTP port range"

D) "SIP Interface"

Message Condition rules is related/applied to the:

A) "IP Group table"

B) "Proxy Set table"

C) "Account table"

D) "Classification table"

The Classification process includes the following stages:

A) "Registration Database --> Proxy Set table --> Classification table --> Allow/Reject parameter"

B) "Classification table --> Registration Database --> Proxy Set table --> Allow/Reject parameter"

C) "Proxy Set table --> Allow/Reject parameter --> SRD table --> SIP Interface table"

D) "SRD table --> SIP Interface table --> Proxy Set table --> Allow/Reject parameter"

SIP Interfaces are used to:

A) "Differentiate different applications"

B) "Define the SBCs listening ports"

C) "Separate different signaling traffic"

D) "All the answers are correct"

When the E-SBC device operates in media transparent, how does the signaling and media flow between endpoints?

A) "The signaling traverses the E-SBC device and the media flows directly between the endpoints"

B) "The media traverses the E-SBC device and the signaling flows directly between the endpoints"

C) "The signaling and media flow directly between the endpoints"

D) "The signaling and media traverse the E-SBC device"

Coders received in the incoming SDP offer and not configured in the 'Extension Coders' list are?

A) "Removed from the outgoing SDP offer"

B) "Re-arranged and listed last in the coders list in the outgoing SDP offer"

C) "The incoming coders are replaced with new coders based on the 'Extension Coder' list"

D) "Sent in the outgoing SDP offer, unless they are not in the 'Allowed Coders' list"

To add a new coder to the outgoing SDP offer, you need to:

A) "Configure it in the 'Allowed Coders' list"

B) "Configure it in the 'Extension Coders' list, and if 'Allowed Coders' list is configured then verify that it is not listed"

C) "Configure it in the 'Extension Coder' list, and if 'Allowed Coders' list is configured then verify that it is listed"

D) "If the coder is not in the incoming SDP offer, it cannot be added to the outgoing SDP offer"

The E-SBC device uses various media handling modes of operation. Which mode of operation minimizes bandwidth usage through the E-SBC?

A) "Selective Media Anchoring without transcoding"

B) "Media Anchoring with transcoding"

C) "Media Anchoring without transcoding"

D) "No Media Anchoring"

The alternative routes for survivability can be?

A) "To an alternative ITSP"

B) "To an alternative IP-PBX"

C) "Between UA's in the local network using the E-SBC database"

D) "All answers are correct"

To configure alternative routing I need to?

A) "Enable the AltRoute parameter"

B) "Configure another IP Group"

C) "Configure another routing rule in the IP-to-IP Routing table and use the Alternative Route Options column"

D) "Configure another IP Profile"

The E-SBC device can perform transcoding between two UAs that use different DTMF methods. Where is this feature enabled in the E-SBC Web GUI?

A) "Telephony Profile Settings"

B) "IP Profile Settings"

C) "IP Media Settings"

D) "SIP General Parameters"

The E-SBC device has been designed to provide the customer with several built-in security features. Which security feature enables the system administrator to limit the number of concurrent calls per subnet or SIP Trunk?

A) "Topology Hiding"

B) "Admission Control"

C) "Registration Restriction Control"

D) "Access Control Lists"

When the E-SBC device receives an incoming INVITE, it first determines the source and destination URL. The destination URL is obtained from:

A) "To header"

B) "P-Asserted-Identity header"

C) "Request-URI"

D) "Diversion header"

The Classification Process result is:

A) "A manipulated message based on the Message Manipulation table"

B) "An assignment of the call to the Source IP Group"

C) "An assignment of bandwidth to the call based on the Call Admission Control table"

D) "All the answers are correct"

A call is rejected by an ITSP due to an unknown header, what can the SBC do to make sure that the call will be accepted by the ITSP

A) "Enable classification by proxy set"

B) "Define a message condition and apply it to the routing table"

C) "Manipulate the unknown header"

D) "Any of the above"

The most secure way to classify ITSP is by the Proxy Set table:

A) "Correct, but only if we define Call Admission Control (CAC) Rules"

B) "ֲ It's not possible to classify by Proxy Set"

C) "Wrong"

D) "Correctֲ "

In order to have the security feature in the E-SBC application improved, which ֲ of the following statements is incorrect:

A) "Use the Condition Table to have an enhanced classification process."

B) "If possible, use uncommon ports in SIP Interfaces Table."

C) "Define generic routing rules"

D) "Select port 0 in SIP Interfaces Table when transport type is unused."

How can I configure parameters that don't appear in the web interface?

A) "If a parameter can't be found by the search engine of the web, it can only be configured via ini file or SNMP"

B) "Use the AdminPage"

C) "Add it to an empty file and then upload it to the device"

D) "Both B and C are correct"

Audiocodes - SBC 7.0 - Essentials & Configuration - Oct07 2016 - Exam

Master the Essentials of AudioCodes E-SBC 7.0

More Quizzes