Mock Test
Engine Performance and Safety Quiz
Test your knowledge on engine performance, safety standards, and engineering design with our comprehensive quiz. Designed for enthusiasts and professionals alike, this quiz covers crucial aspects of vehicle engineering and endurance events.
- Multiple choice format
- Covers 15 questions
- Scores available at the end
The maximum sound level for the given engine having data_______
15.25m/s, @600 rpm, 110db
74.23km/hr, @1000 rpm, 112db
54.9km/hr, @500 rpm, 110db
None of the above
In a double-lug joint each lug must be at least ________ thick
10mm
4.5cm
4.5mm
1.0m
What is TRUE for endurance event?
Only one run
More than one run
Driver change must be within two minutes
Both A & C
Catch cans, their mountings and all cooling or engine lubrication system hoses must be made of material that is permanently rated for temperatures of at least
100ºC
150ºC
120ºF
120ºC
After Technical Inspection, the only adjustments permitted to the vehicle are:
Defective Tires
Brake pads
Mirrors
All of the above
The page limit for engineering design supporting document is ________
Minimum 40
No more than 40
Maximum 50
No limit
The smaller track of the vehicle (front or rear) must be _________ of the larger track.
No more than 25%
No more than 50%
No less than 50%
No less than 75%
The length of the section perpendicular to the bulkhead may be a ________m measured from the rearmost face of the bulkhead
Minimum of 25
Maximum of 25
Maximum of 2.5
Maximum of 0.025
If the throttle position differs by more than 10 % from the expected target TPS position for more than
500ms
100ms
500s
150ms
The minimum allowed radius of the shutdown buttons on both sides of the vehicle is
40cm
20mm
0.2m
40mm
Laminating test panel must measure________
Upto 250mm x 500mm
Atleast 285mm x 500mm
Exactly 275mm x 500mm
Not more than 250mm x 500mm
No part of the AIP may permanently deflect ________beyond the position of the AIP before the test.
More than 30mm
Atleast 25mm
More than 25mm
Must be 25mm
Tractive System, LV, Driver Interface
30,10,15
30,15,10
10,15,30
15,10,30
One shutdown button serves as a cockpit-mounted shutdown button and must have a minimum diameter of
25cm
2.4cm
2.5cm
24cm
Business Plan Presentations are limited to a maximum of _________
20 mins
10 mins
600 secs
120 secs
{"name":"Mock Test", "url":"https://www.quiz-maker.com/QPREVIEW","txt":"Test your knowledge on engine performance, safety standards, and engineering design with our comprehensive quiz. Designed for enthusiasts and professionals alike, this quiz covers crucial aspects of vehicle engineering and endurance events.Multiple choice formatCovers 15 questionsScores available at the end","img":"https:/images/course3.png"}
More Quizzes
Mechanical Quiz #11
10512
QUIZZELLA (1)
1585
Engineering Safety Standards Quiz
1589
QUIZZELLA 2
1589
Rulebook FB24
1588
DIESEL ENGINE-I
251227
FS CZECH 2020
10535
Rulebook test ENGINE dept
10511
Registration Test - Saturday 18/01/2020
15824
Rulebook Mock 2
15832
EMAR302: Bedplates & Crankshafts
10526
Fs registration quiz
11620