Unit 4: PVC,VCM, SPVC (Group 4) - Process Safety Management Module
Process Safety Management Quiz
Test your knowledge on the critical aspects of Process Safety Management related to PVC, VCM, and SPVC. This quiz is designed to ensure that you understand the hazards, safety equipment, and protocols necessary to maintain a safe working environment.
Key topics covered include:
- Hazardous Materials
- Vinyl Chloride Monomer Safety
- Personal Protective Equipment (PPE)
- Emergency Action Procedures
1. Hazardous materials are materials that present a health and/or physical hazard?
A. True
B. False
2. Vinyl Chloride Monomer (VCM) is extremely flammable and may explode if heated.
A. True
B. False
3. You must know the location, use, and care of the fire protection equipment used in this plant.
A. True
B. False
4. Vinyl Chloride Monomer is listed as an OSHA Carcinogen (cancer-causing) agent.
A. True
B. False
5. Vinyl Acetate Monomer (VAM) is extremely flammable and may cause irritation to skin, eyes and respiratory tract.
A. True
B. False
6. In order to work in this Group you must know a number of things some of which are:
A. Safe Work Practices
B. Facility rules and regulations
C. Known potential hazards
D. Emergency Action Plans
E. All the above
7. What are some of the hazards of Ethylene Dichloride (EDC)?
A. Its flammable
B. Human Poison by ingestion, do not induce vomiting.
C. High vapor concentration due to heating can cause symptoms similar to ethyl alcohol intoxication with dizziness, headache, and shortness of breath.
D. Causes irritation to eyes and skin and is toxic by inhalation, ingestion and skin contact.
E. All the above
8. Always make sure proper PPE is worn and proper lock-out, line breaking, and permitting procedures are followed.
A. True
B. False
9. If you come in contact with hazardous materials, notify FPC personnel. Wash contacted area for at least 20 minutes and get medical help.
A. True
B. False
10. What PPE should you wear where there is potential to contact Hydrogen Chloride gas or Hydrochloric acid?
A. Chemical goggles
B. Full face shield
C. Acid resistant slicker suit
D. Rubber gloves
E. All the above
11. Some of the fire and safety equipment found in this Group are:
A. Safety showers
B. Fire extinguishers
C. Gas detectors
D. All the above
12. Chlorine Gas may cause eye and respiratory irritation.
A. True
B. False
13. The feedstock or inputs for the PVC Unit are: VCM, Nitrogen and Caustic.
A. True
B. False
14. Before beginning a job in one of the Group 4 units, you should know the location of the nearest Safety shower / eyewash to the area where you will be working.
A. True
B. False
15. Nitrogen is an odorless, colorless gas and is an asphyxiation hazard.
A. True
B. False
16. Vinyl Acetate Monomer (VAM) is suspected of causing cancer.
A. True
B. False
17. Knowledge of hazardous materials and protection during their use will help to control the hazards.
A. True
B. False
18. The person most responsible for my safety is:
A. Myself
B. Shift Safety Coordinator
C. Shift Supervisor
D. Area Manager
19. Safety Data Sheets (SDS’s) are found on the FPC-TX Intranet?
A. True
B. False
20. Common utilities that can be found in VCM, PVC and SPVC include: Nitrogen, Steam and Instrument Air.
A. True
B. False
{"name":"Unit 4: PVC,VCM, SPVC (Group 4) - Process Safety Management Module", "url":"https://www.quiz-maker.com/QPREVIEW","txt":"Test your knowledge on the critical aspects of Process Safety Management related to PVC, VCM, and SPVC. This quiz is designed to ensure that you understand the hazards, safety equipment, and protocols necessary to maintain a safe working environment.Key topics covered include:Hazardous MaterialsVinyl Chloride Monomer SafetyPersonal Protective Equipment (PPE)Emergency Action Procedures","img":"https:/images/course8.png"}