FSG#309

Create an image of a dynamic racing scene featuring engineers working on a race car, with technical blueprints and tools scattered around, showcasing a sense of teamwork and high-tech automotive design.

Engineering Knowledge Assessment

Test your engineering understanding with our FSG#309 quiz, designed to challenge your knowledge in various technical areas related to vehicle dynamics and component specifications.

Engage with questions that cover topics like:

  • Distance measurements
  • Cost report submissions
  • Tire regulations
  • Performance calculations
13 Questions3 MinutesCreated by EngineeringEagle27
1.Which is the minimum distance in cm between the rearmost actuation face of the pedals and the center of the 200mm circle placed on the seat bottom?
2.When submitting the cost report, where do drawings and other supporting material go?
A)In the EBOM file next to the table describing the part
B)The supporting material is included in the standard cost tables
C)In a seperate file
D)Supporting material should not be submitted, just presented at the visual inspection
3.A stone is sticking in a free spinning tire at a radius of 170mm and travels 50m/s. How much revolutions per minute is the stone traveling at? Round to two places after the comma.
4.A turbine is 20 metres below the surface of the water. 4 m³ of water flows through each second. What power does the turbine emit when the efficiency is 85%? (in kW, round to 2 Digits)
5.When the operating condition is damp, teams may change between dry tires and wet tires:
A)Any time during the acceleration, skidpad, and autocross events.
B)Any time during the acceleration, skidpad, and endurance events.
C)Any time before taking the green flag to start endurance.
6.Is the following statement true or false?If the Masterswitch is in the off Position, the vehicle has to be static and not be able to be moved. If it is moved while the masterswitch is in the OFF position a RED-light has to flash which has to be visible all around the vehicle and at a height of at least 100mm.
A)True
B)False
7. Which statement is incorrect?
A)Rotating parts need a protection constructed of 2 mm steel or 3 mm aluminium alloy 6063
B)It is allowed to use a planetary gear with a gear ratio between i=3 and i=10
C)A second nut isn't allowed to prevent loosening the tires
D)It is illegal to glue on the covers over suspension and steering components
8.One of the following statements is right:
A)Participants have to be at least 18 years of age
B)Any student can participate at the competition
C)Participants have to be at least 16 years of age
9.How much points (in percentage, round off to 3 significant figures) could a team be awarded from the static even?
10. How is the position of the Trottle defined?
A)Percentage of travel from fully closed to fully open where 0 % is fully closed and 100 % is fully open
B)percentage of travel from fully closed to fully open where 0% is fully open and 100% is fully closed
C)percentage of travel from fully closed to fully open where idle is fully closed and 100% is fully open none of the above
D)percentage of travel from fully closed to fully open where idle is fully open and 100% is fully closed
11. The External Walls of an Accumulator Container have a height of 330mm. How high must the Walls be, which separate the single segments in the inside of the Container?Round up to whole numbers. (without Unit)
12)
A)K
B)Si
C)Ne
D)No
13)Where is the mistake?
A)From line 4 to line 5
B)From line 5 to line 6
C)From line 7 to line 8
D)There is no mistake
{"name":"FSG#309", "url":"https://www.quiz-maker.com/QPREVIEW","txt":"Test your engineering understanding with our FSG#309 quiz, designed to challenge your knowledge in various technical areas related to vehicle dynamics and component specifications.Engage with questions that cover topics like:Distance measurementsCost report submissionsTire regulationsPerformance calculations","img":"https:/images/course6.png"}
Powered by: Quiz Maker