Kundi

A futuristic control room with various mission systems interfaces and radar screens, showing a high-tech environment with operators working on advanced mission management systems.

Mission Systems Knowledge Quiz

Test your expertise on mission systems with this comprehensive quiz designed for professionals in the field. Covering essential topics from software applications to ESM capabilities, this quiz aims to enhance your understanding and retention of critical information.

Challenge yourself with multiple-choice questions that delve into:
- Software application management
- Event report accessibility
- System shutdown protocols
- ESM classification capabilities

42 Questions10 MinutesCreated by NavigatingEagle123
Software application which manage the bit function for all CAEW system
MRC
AMC MBIT
SDI
MC2
Which of the following system is not connected to mission system BUS
SPS
CMC
OWS
MCS
Proper PIC shutdown is through
PIC
OWS
CDU
MCS
What is displayed on the hardware map icon
PSS
FSS
PSS & FSS
PSS, FSS, LPF LEVEL
Where can the records of event reports can be accessed
Hardware map
Log Files
PSS
FSS
Where is the servicability of the mission system component displayed
Hardware Map
Log files
CAS
KVM
How is the global erase activated
Erase on OWS1
Erase on OWS3
Erase on any OWS
Erase option on any OWS
During airborne condition, it is impossible to modify, edit or change the ____ File?
ESM PFM
MPD
RDR PFM
GDN PFM
What type of test can be performed when selecting BIT control function in OWS screen?
PWR UP & INITIATE BIT
INITIATE BIT
MAINTENANCE BIT
INITIATE & MAINTENANCE BIT
Who can initiate the whole system shutdown?
Any Operator
Only Mission Commander
Operator using KVM to shutdown MCS
All of the above
GASP is generated by?
Ground C2 centre that transfer it to the CAEW via SATCOM
Ground C2 centre that transfers it to the CAEW via GDN
Fusion of on board sensor data with data received via COM system
Fusion on board sensor data only
For OWS 2,4,5,6 where does the MS normal 28VDC come from?
E1 COLUMN
LEER BOTTOM CB
REER BOTTOM CB
MPDB
For RADAR to go from STNDBY to OPERATE, how long does it take to attain the required power?
11ms
22ms
33ms
44ms
How many GPS satellites are required for aquiring 1PPS signal?
Atleast 4 satellites
Less than 3 satellites
3 satellites are sufficient
1 satellite
What is the input voltage of the TSU
28VDC
220VAC
115VAC
270VDC
The lock to GPS LED on TSU front panel will flicker green when...
A failure occurs during warm up phase
1PPS signal is acquired from less than 4 satellite
External 1PPS is not selected as the syncronization source
Rubidum oscillator is not locked
Which of the following is true about CDU?
Control RADAR functionality
Selection of mission system and SPS information to be displayed on the original display unit and display parameters
Control INS navigation data from aircraft unit
Selection of ESM generated pages
PIC main function is to generate...
Air situation Picture
Self protection suite display
General Status Page
All of the above
What is the function of PIC?
Enable flight crew to control the RADAR weather mode
Generate audio output to the original aircraft
Communicates with DU to recieve flight crew selections and provides selection menu for display
Controll ESM funtionality recording through flight crew selection CDU
The Mission Parameter Data consist of _________ files
Pilots fault list and maintenance fault list
Pre flight messages and tactical mission Data
ESM and RADAR
OWS and MCS
During the post mission, the MSS is used to support _____ and analysis of ESM system recording
Playback
Recording
Operation of AMS
PFM generation
The MSS is able to perform ...
File management
ESM simulation
ESM playback
All of the above
The ESM ENV, ESM ASG, MCS & MSS PC are interconnected by...
Discrete lines
RS422
LAN (ETHERNET)
RS232
The MPD generation process is divided into sub process, Which of the following is the sub processor?
Preparation
Validation
Load file generation
All of the above
OTS ENV unit simulates
Airborne systems
Flight arena
Communication channels
Other C2 aircrafts
The frequency coverage for ESM is
0.5-12
0.5-14
0.5-16
0.5-18
Which of the following is not an ESM main component?
MRX
ESMP
FER
MPU
ESM classification capability is based on?
Data recieved via MC2
Received signal amplitude
Emitter Location
Emitter predefined database
Lobe switching amplitude comparison is used to provide DF for
Pulsed signal
RF signal
CW signal
Video Signal
What will be the output frequency range if the input frequency range of FER is 6.0-10GHz
2.0-6.0
6.0-2.0
5.5-4.0
5.5-1.0
What is the maximum range of LDN
100NM
150NM
200NM
250NM
What is the data communication network of GDN system
Static TDMA
Dynamic TDMA
CDMA
FDMA
Which of the following components is not part of cabin intercom and voice system?
6 UHF transceivers
Digital audio control panal
Modular Radio Cabinet
Extended Digital Audio Control Panel
What is the maximum detection range of the S-Band RADAR
E1 COLUMN
BEHIND S-BAND ANTENNA
A1 COLUMN
S BAND RADAR DOES NOT REQUIRE TRM
If S-Band RADAR CU power supply is faulty, the S-Band RADAR...
Can operate up to range of 50NM
Can operate L-Band CU via RDU
Can provide weather RADAR only
Cannot Operate
How many receive channels are there in each control unit?
1
4
8
12
Where is the Safe On Transmit switch located?
B2 PDB
B2 COLUMN
E1 PDB
A1 COLUMN
What are the modes of operation for SPS system
OFF, SAFE, NORMAL, BACKUP
OFF, INITIAL, STANDBY, NORMAL
INITIAL, STANDBY, NORMAL, BACKUP
INITIAL, STANDBY, SAFE, NORMAL
SPS system consist of which LRUs
TPU,SPSC, CFDS, & SSU
IFF, SPSC, SSU & CFDS
SPSC, PDCS, SSU & IFF
CFDS, SSU, TPU & ESMP
How many dispensers are ther in CAEW aircraft?
3
4
5
6
How many states are there in MWS
OFF, INIT & WARMUP, STANDBY & OPERATIONAL
OFF, INIT & WARMUP, NORMAL & AUTOMATIC
OFF, NORMAL, SAFE & BACKUP
OFF, STANDBY, OPERATIONAL AND MAINTENANCE
What are the conditions for dispense chaff/flare?
Master switch in ARM position
Weight On Wheel "OFF'
Safety Pin Out
All of the above
{"name":"Kundi", "url":"https://www.quiz-maker.com/QPREVIEW","txt":"Test your expertise on mission systems with this comprehensive quiz designed for professionals in the field. Covering essential topics from software applications to ESM capabilities, this quiz aims to enhance your understanding and retention of critical information.Challenge yourself with multiple-choice questions that delve into:- Software application management- Event report accessibility- System shutdown protocols- ESM classification capabilities","img":"https:/images/course1.png"}
Powered by: Quiz Maker