26th rules quiz
26th Rules Quiz
Test your knowledge with our engaging 26th Rules Quiz designed for students and enthusiasts of engineering and automotive competitions. This quiz will challenge your understanding of competition rules, technical specifications, and theoretical applications in engineering.
- Multiple choice questions
- Practical applications and theoretical knowledge
- Perfect for students and teams preparing for competitions
Choose the correct answer.
A. The trackdrive awards the same number of points for EV and DV.
B. Aristurtle DV and Prom EV are competing in FSG. If they are both finalists in all the three static events, both of the two teams can have more points than the other.
D. Team members who will drive a competition vehicle at any time during a competition must present a valid, government issued driver’s license for motors, containing a photograph.
C. Competition rules may change during the competition.
Choose the correct statements.
A judge may not re-participate in a FS competition as an ESO.
A team which doesn’t correct its TMD document within 163 hours from the corrections requests, may be penalized with 10 points.
VSV may be of the type .svi .
A team may wait in the de-registration list forever, but may not be removed from it.
Is the tree an AVL tree?
Yes
No, because the order is not correct
No, because there are too many numbers.
No, because there is no balance.
What is the penalty for not being ready to drive in endurance in your designated time slot?
10 sec on endurance time for each following time slot missing
2 minutes penalty on the endurance time
No penalty if the team starts at a later time slot2
120 points
2 points
In the parc ferme, your car weights 7.3 kg more that during in technical inspection. What are the consequences?
60 points penalty.
No penalty because it is a violation without advantage to the team
44 points penalty
A 30 sec penalty on your endurance time(only lower weight will result to penalty)
Which statement is correct?
Hearing protection when using loud tools is only recommended.
Visitors watching dynamic events must wear closed-toed shoes.
Even team members that are only assisting must wear eye protection during metal cutting
Using motorized scooters on the event is forbidden.
2) Choose the correct option of penalties for the late submission of following documents :
1. Autonomous Design Report
2. Electrical System Officer Qualification
3. Vehicle Status Video
4. Structural Equivalency Spreadsheet:
2. Electrical System Officer Qualification
3. Vehicle Status Video
4. Structural Equivalency Spreadsheet:
a. -10 points/day , max -70 points (deregistration afterwards)
b. -10 points/day , max -70 points (no deregistration afterwards)
c. -5 points/day if officials requested a correction, max -35 points
d. -10 points + -3 points/day , max -49 points
1-a, 2-b, 3-d, 4-c
1-a, 2-c, 3-d, 4-b
1-b, 2-d, 3-a, 4-c
1-b, 2-c, 3-d, 4-a
In the circuit below the load ZL has been chosen properly in order to satisfy Jacobi’s Law. Calculate the Power that is transmitted to the load ZL. Use one decimal.
5
2.5
10
1
3.3
5.4
A primary structure made of composite materials has cockpit opening with a height, from its flat inner skin, of 500mm.In front view the side impact is inclined 15o from the vertical plane. The cockpit opening in top view is 640mm wide at its rear part and 520mm in its front with top view angles same as the cockpit opening template. Can the template pass through the opening until the required distance from the inner skin is achieved? Front view and top view images respectively:
Yes
No
Further information are needed
Given the RLC circuit in the image, with R=470Ω, L = 0.1H and C=100nF, find the ratio |V|/|VL| if the AC voltage source is operating at resonant frequency. VL is the voltage across the inductor.
0.99
0.47
5.00
2.44
0.28
11.23
0.34
55.0
15.4
What will the following code print to the terminal? Please give your answer in the form of a continuous string of characters.
ESF
SEF
SSE
EES
EEF
FFE
SEE
SFE
Determine if the aerodynamic device with the following dimensional characteristics is rules compliant. The device: extends rearward 24cm from the rearmost part of the rear tires, 10mm inboard of the most inboard point of the rear wheel/tire on both sides,it’s lowest point is 520mm above the ground, it’s vertical length from its lowest to its highest point is 0.64m,it’s longditunal length is 84cm.The rearmost portion of the front face of the driver head restraint support, including 45mm padding is 30cm frontward of the most frontward part of the rear tires.The tire has a radius of 20cm.
No.
Yes.
We need further information.
It depends on the competition.
What is the area moment of inertia of a steel tube intended for main hoop with wall thickness of 2.6mm and inner diameter of 20mm.Round to the second decimal.
11941.77
119.4177
12.34444
12344.44
4500
2345
10301.44
10.321
4031.9
444.55
In the above circuit, R is the internal resistance of the inductor L. The switch closes at t=0. Find the total energy losses on R during the first second. R = 4 Ohm, L = 30mH, V = 16V.
78.90
32.55
120.24
63.28
235.55
56.78
34.67
12.44
0.97
34.56
{"name":"26th rules quiz", "url":"https://www.quiz-maker.com/QPREVIEW","txt":"Test your knowledge with our engaging 26th Rules Quiz designed for students and enthusiasts of engineering and automotive competitions. This quiz will challenge your understanding of competition rules, technical specifications, and theoretical applications in engineering.Multiple choice questionsPractical applications and theoretical knowledgePerfect for students and teams preparing for competitions","img":"https://cdn.poll-maker.com/104-5107763/img-qopn5nntzxawbpf0iew3q3qz.jpg"}