SkillsUSA Wisconsin US&R
The flow of electricity through a circuit is known as the:
Battery
Motor
Gear
Current
Which of the following components is used in an electrical circuit to interrupt the flow of electricity?
Resistor
Transformer
Switch
Flux capacitor
Which of the following is the source of power for your RoboRescue robot?
Solar panel
Battery
Internal combustion engine
Servo
A technical drawing that includes several views (typically top, side and front views) is called a (an):
Perspective drawing
Isometric projection
Multi-view drawing
Side view
A transfer of energy or power from the motor shaft to the wheels or axles without a gear or pulley is called:
Direct drive
Indirect drive
Overdrive
Drive shaft
A transfer of energy or power from the motor shaft to the wheels or axles, typically through gears and pulleys is known as:
Direct drive
Indirect drive
Overdrive
Drive shaft
In the figure, if Gear A is turning in a clockwise direction, which direction is Gear B turning?
Clockwise
Counter-clockwise
It is not turning
Referring to the figure, if a motor is driving the shaft (axle) that Gear A is on, is the shaft on Gear B rotating faster or slower than A?
Faster
Slower
Same speed
Referring to the figure, if Gear A has 20 teeth and Gear B has 30 teeth, and Gear A is turning at a rate of 10 rpm, then at what rate is Gear B rotating
15 rpm
6.67 rpm
10 rpm
20 rpm
A rotating machine that changes electrical energy to mechanical energy is called a:
Lever
Gear
Motor
Axle
The frame upon which the rest of a mobile robot is constructed is known as the:
Chassis
End effector
Gripper
Drive gear
A device or tool connected to the end of a robot arm is known as a (an):
Drive gear
Pinion gear
Motivator
End effector
Which of the following is not one of Issaac Asimov’s Three Laws for Robots:
A robot may not injure a human being or, through inaction, allow a human being to come to harm.
A robot must obey any orders given to it by human beings, except where such orders would conflict with the First Law.
A robot must protect its own existence as long as such protection does not conflict with the First or Second Law.
A robot must have at least one end effector to be classified as a robot.
{"name":"SkillsUSA Wisconsin US&R", "url":"https://www.quiz-maker.com/QPREVIEW","txt":"The flow of electricity through a circuit is known as the:, A wire or component that conducts electricity is known as a:, Which of the following components is used in an electrical circuit to interrupt the flow of electricity?","img":"https://cdn.poll-maker.com/28-1024507/test-2013mc-key.jpg?sz=1200-00000000001000010835"}