RuleBook Quiz

Engine running is allowed in the engine test area and in the dynamic area, when the following conditions are met:
The vehicle must have passed mechanical inspection.
A fire extinguisher must be immediately available.
Both (a) and (b)
The vehicle must not be jacked up using a quick jack
The perimeter shear strength of the monocoque laminate in the front bulkhead support structure must not be more than ______
4N
4000N
4 KN
None of these
The fuel tank must have a filler neck which:
has at least an outer diameter of 35 mm at any point between the fuel tank and the top of the fuel filler cap.
is made of material that is permanently rated for temperatures of at least 120 °F.
is angled at no more than 30° from the vertical
All of the above
Which of the following is true in context of Inertia Switch?
The device may include any semiconductor components.
An inertia switch must be part of the shutdown circuit (see EV6.1 and CV4.1) such that an impact will result in the shutdown circuit being opened. The inertia switch must latch until manually reset.
The device must be rigidly attached to the vehicle. It must be possible to demount the device so that its functionality may be tested by shaking it.
Inertia switch should be directly acting. External relay circuits are prohibited.
Recharging low voltage batteries is permitted after technical inspection.
True
False
Which of the following is true?
In Endurance Event, slaloms in straight line can be 12 m apart.
The length of the autocross track is less than 1500 m.
In Acceleration Event, TMax is 1.25 times the time of the fastest vehicle including penalties.
All of the above
Any four teams may be chosen to participate in the cost and manufacturing finals to determine the cost and manufacturing event winner.
True
False
Gas cylinders/tanks and their pressure regulators, must be shielded from the driver. The shields must be steel or aluminum with a minimum thickness of 0.2 cm.
True
False
Which of the following is true in context of Onsite Working Safety?
When jacking up the vehicle a safe and stable support device rated for the load must be used
The use of self-propelled pit carts, tool boxes, tire carriers or similar motorized devices in any part of the competition site can be allowed..
Everyone in the dynamic area and everybody working on the vehicle must wear appropriate, closed-toed shoes.
When using metal cutting equipment, eye protection is required for the operator as well as any team member assisting. When operating loud tools, hearing protection is required.
The length of the section perpendicular to the bulkhead may be a maximum of ______ measured from the rearmost face of the bulkhead.
25mm
0.25cm
0.25m
None of these
{"name":"RuleBook Quiz", "url":"https://www.quiz-maker.com/QJRHD8X19","txt":"Engine running is allowed in the engine test area and in the dynamic area, when the following conditions are met:, The perimeter shear strength of the monocoque laminate in the front bulkhead support structure must not be more than ______, The fuel tank must have a filler neck which:","img":"https://www.quiz-maker.com/3012/images/ogquiz.png"}