Bubla 1
How does a Cisco TCS process incoming video calls?
Recording Alias > Template > Media Server Configuration
Recording Alias > Media Server Configuration > Template
Recording Alias > Media Server Configuration > H.323 > Template
Recording Alias > Workflow > Template > Media Server Configuration
A customer wants to record Cisco TelePresence conferences with the ability to alter the video format and add captions. Which two products are recommended to accomplish this goal? (Choose two.)
Show and Share
Digital Media Manager
Interactive Experience Manager
Media Experience Engine
TelePresence Content Server
Which three features are supported by the Cisco Video Surveillance Encoding Server? (Choose three.)
IP and analog cameras
MPEG-2 and MPEG4: encoding
Archiving
Motion detection
Clustering
Virtual matrix
Which three products are compatible with Digital Media Manager? (Choose three.)
A. Media Delivery Engine
B. Interactive Experience Client
C. Show and Share
D. Cast
E. Digital Signs
F. Stadium Vision Director
A customer has a data and VolP converged network and would like to add video to this network. Which two key 008 elements should be included in the new network design? (Choose two.)
Configure bandwidth management features to smooth bursty traffic and mitigate end-to-end congestion.
Assign a high priority to transactional traffic to maintain quality of business traffic.
Keep video traffic on the low latency queue and move voice traffic to a lower-priority queue.
Apply bandwidth control features that will guarantee bandwidth for the maximum possible amount of video traffic.
Assign both video and voice traffic to use the highest-priority queue.
A network engineer wants to quickly view any issues that may exist fora newly deployed Cisco TelePresence 8X20 codec. To which location in the codec web GUI should the engineer navigate to find this information?
Diagnostics > Alerts
Diagnostics > Troubleshooting
Configuration > System Status
Configuration > Security
An engineer wants to know if there is a way to determine the optical zoom of a Cisco TelePresence 8X20 remotely. Which two methods will retrieve this information? (Choose two.)
From the CLI. Run xstatus.
From the CLI. Run xconfig.
From the web GUI. choose Configuration > System Status > Camera.
From the web GUI. choose Configuration> Camera > Status.
From CLI. Run xcommand camera.
A desktop video endpoint is needed that can support a PrecisionHD camera design and a built-in display. And is Bluetooth-ready and multisite-capable. Which desktop endpoint supports all ofthese requirements?
SX20
EX60
SX80
EX90
An immersive video room requires acoustic remediation because there is noticeable reverb present. What type of acoustic paneling does Cisco recommend to provide remediation?
NRC rating greater than 0.75
NRC rating greater than 0.5
NRC rating less than 0.75
NRC rating less than 0.5
An engineer is configuring a Cisco TelePresence System endpoint for use with a maximum of six people in the room. Which table type should be configured when setting up cameras where two participants directly face the endpoint display?
Short racetrack
Longong racetrack
Short rectangle
Long rectangle
Which two methods can be used to set the default call protocol of a Cisco TelePresence endpoint running TelePresence codec firmware? (Choose two.)
Use the GUI and set System > H.323 > Settings > Default Call Protocol > H.323.
Use the CLI command xConfiguration Conference 1 DefaultCall Protocol: H323.
Use the CLI command Conference Default Protocol: H323.
Use the CLI command Default Protocol: H323.
Use the GUI and set Configuration > System Configuration > Conference > DefaultCall > H.323.
On a Cisco C-Series codec. Where would a technician go to configure the wallpaper?
Configuration > UserAdministration
Configuration > Personalization
Configuration > Peripherals
Configuration > System Configuration
A new Cisco TelePresence MCU 5300 is being installed. The customer requested a static IP address to be configured on this device. Which two methods address this request? (Choose two.)
From the MCU console. Issue the command set static ip-address netmask default-gateway.
From the MCU console. Issue the command xconfigure interfacezl static ip-address netmask.
From the MCU console. Issue the command static A ip-address netmask default-gateway.
From the web interface. Use the Network > Port A menu options.
From the web interface. Use the Settings > Interface menu options.
To which Ethernet port on a Cisco TelePresence System (500/1x00/1300/3xx0) endpoint would a technician need to connect to manually assign a static IP address for first-time setup?
IP phone port
Network port
Camera port
Auxiliary network port
A user is currently on a Cisco TelePresence call using a Touch 8 device and would like to change the local screen layout so that the active speaker is in full screen and the other participants are smaller within the picture. Which layout option should the user choose?
Prominent
Overlay
PiP
FullScreen
The user ofa Cisco TelePresence MX300 wants to control the far-end camera of any video conference participant. Which control device and function is used to control the far-end camera?
Navigate using the TRCS Remote Control arrow keys.
Tap on the image of one of the participants using touch control.
Use the Touch Control Conference functions.
Use the TRCS Remote Control home key.
A company would like to add additional multipoint features to their video infrastructure. Which feature is the video administrator attempting to configure in this exhibit?
Multisite feature to allow third-party multipoint conferences
Multipoint scheduled conferences using conference factory
Multiway feature to allow on-demand conferences
Multisite feature to allow scheduled conferences
Which MCU supports the use of a lobby screen?
CTMS
TS 8710
MCU 5300
Conductor
An administrator is attempting to register a Cisco TelePresence endpoint to a Cisco VCS. The Cisco VCS uses local authentication and a single username for all endpoints. Where is the first place that the administrator should go to resolve the issue? (incorrect autentificacion credentials for user)
VCS > Configuration > Authentication > Devices > Local Database
Endpoint > Configuration > System Configuration > Profile 1 > Authentication
VCS > Configuration > Authentication > Outbound Connection Credentials
Endpoint > Configuration > System Configuration > SlP > Profile 1 > Authentication 1
VCS > Configuration > Registration > Allow List
VCS > Configuration > Registration > Deny List
A network engineer is attempting to register a Cisco TelePresence endpoint to a Cisco VCS. What is the most likely cause of this failure? (server is unavailable)
The lab.local SIP domain is not configured in the Cisco VCS allow list for registration.
The Cisco VCS failed to bind to the LDAP server. Which is where the lab.local SIP domain is learned.
The lab.local SIP domain does not exist on the Cisco VCS.
The endpoint does not have the proper port assignments configured for SIP signaling.
The endpoint uses the TCP protocol and the Cisco VCS is configured to allow only TLS for SIP registrations.
Management would like to find out when a particular multipoint control unit feature was enabled and who enabled it. Which menu option is the most appropriate when searching for that information?
Event Display Filter
Audit Log
Event Log
Syslog
An employee is reviewing the logs from a Cisco TelePresence System unit due to reports of calls being dropped. Which log entry explains the reason for the call failure?
A. INFO Packet loss detected: 100% loss - no media stream received in the last 10 seconds
B. INFO Jitter buffers increased
C. INFO admin CLI login from 10.160.134.15:51151
D. INFO Main Video stream packet loss detected on the center codec
A Cisco TelePresence System 1300 Series endpoint is in the process of booting and the engineer notices a red "X" on the screen for Step 6 in the boot process. What does this red "X" indicate?
A. The endpoint failed to load its firmware.
B. There is an error with compact flash.
C. The endpoint could not obtain an IP address via DHCP.
D. The touch panel is malfunctioning.
A Cisco TelePresence EX Series desktop endpoint failed to register to a Cisco VCS. The SIP status shows "Failed: 403 Forbidden" in the endpoint's web interface. What is the first thing that should be checked in the endpoint configuration settings?
A. Verify that the correct SIP authentication credentials have been configured.
B. Ensure that CallSetup Mode is set to Gatekeeper.
C. Verify that Outbound Connection Credentials are properly configured.
D. Check to see that SIP Mode is set to On.
The customer recently connected 3 newTV monitor to the Cisco TelePresence endpoint. This device is now showing a warning concerning the echo cancellation delay. Which action could help mitigate this issue?
A. Turn off any postprocessing settings.
B. Turn off 30 mode on the new TV-
C. Turn on Frequency Scan Acceleration for the new TV.
D. Turn off surround sound on the new TV.
Which three items should be considered when restoring a backup to a Cisco VCS Expressway? (Choose three.)
A. A restart is required to complete the system restore process.
B. If the backup file is encrypted. An encryption password will be needed.
C. A valid backup configuration file must be accessible.
D. A function SFTP server is needed for remote restore.
E. The VCS expressway must be put into maintenance mode during the upgrade.
F. A flash drive that is connected to the appliance can be used to restore the configuration.
G. Cisco TMSXE can be used to process and restore backups.
How would an administrator reset a Cisco VCS Control appliance to the default configuration?
A. Via the CLI. Log in as root and issue the factory-reset command.
B. Via the CLI. Log in as root and issue the reset~defaults command.
C. Via the web GUI, log in as the administrator, choose Backup and Restore. And click the Factory Reset button.
D. Hold down the power button for 10 seconds until the light flashes.
E. Hold down the reset button on the back ofthe appliance for 10 seconds.
The command xCommand Security FlPSMode Activate is issued to a Cisco TelePresence C-Series codec. Management wants to reverse the effects ofthis command. Which two methods could be used for this purpose? (Choose two.)
A. From the touch screen. disable FlPS mode in the Administrator Settings menu.
B. From the touch screen. Perform a factory reset from the Administrator Settings menu.
C. From the touch screen. Disable all security settings from the Administrator Settings menu.
D. Use SSH to connect to the system and enter the xCommand Security FlPSMode Deactivate command.
E. Use Telnet to connect to the system and enter the xCommand SystemUnit FactoryReset lnit command.
F. Use SSH to connect to the system and enter the xCommand SystemUnit FactoryReset Confirm: Yes command.
A technician is trying to troubleshoot real-time call information from the CLI ofa VCS. Which command should the technician enter?
Xstatus
B. xconfiguration
C. xfeedback
D. xhistory
E. xcommand
A network engineer wants to perform a factory reset on a Cisco TelePresence MX device from the CLI. Which command should be used?
A. xConfiguration FactoryReset
B. xCommand FactoryReset
C. xCommand SystemUnit FactoryReset
D. xConfiguration SystemUnit FactoryReset
A technician is reviewing the search history details on a Cisco TelePresence VCS for a recent call that failed. What was the cause for the call setup failure?
A. A local call policy rule denied the call.
B. The source alias matched an entry in the registration deny list.
C. The originating caller was not authenticated.
D. The source alias origin is unknown.
A call with a destination alias of 15551001234 reaches a Cisco TelePresence VCS. Which transform will the destination alias match?
A. Transform1
B. Transform 2
C. Transform 3
D. Transform4
A customer wants to know the options that are available when using all Cisco TelePresence SX Series endpoints in a multisite conference that is hosted locally. What are three capabilities of the Cisco TelePresence 8X20 endpoint during a native multisite call? (Choose three.)
A. Ability to change the local layout to prominent mode
B. Ability to change the layout of remote participants to prominent mode
C. Ability to change the Self-View status of remote participants
D. Ability to control the camera of remote participants
E. Ability to change the contact status of remote participants
F. Ability to change the layout of remote participants to multisite mode
A network administrator is asked to configure a video conference using the Cisco TelePresence MCU 5300. There is a requirement for participants to start with the same layout when joining the conference. How can this goal be accomplished?
A. Layouts cannot be customized on the MCU 5300.
B. Configure a custom layout for each user individually.
C. Configure a custom layout and apply the layout to all new participants.
D. Allow each endpoint to configure its own layout.
An engineer is configuring VIP mode for a Cisco TelePresence Multipoint Switch. What are three characteristics the engineer must keep in mind? (Choose three.)
A. VIP mode can be configured only when the meeting is not active.
B. The VIP is displayed on the center screen for three screen systems.
C. Network multipoint meetings are supported.
D. VIP mode timers must be configured from the CLI.
E. Locking is not supported.
F. Only one VIP can be configured for each meeting.
An engineer needs to configure cascading to support additional video conference attendees. What are three capabilities when cascading? (Choose three.)
A. Conductor automatically performs cascading.
B. A maximum of four multipoint control units are supported.
C. Cascading is supported for the Cisco TelePresence Server in remotely managed mode.
D. It is possible to manually create a cascaded conference via the Cisco TelePresence MCU Management APl.
E. Cascading is supported for multipoint control units that are registered to Cisco Unified Communications Manager.
F. All cascaded multipoint control units must be in the same location.
An e)ngineer wants to convert analog live video. Streaming it across an IP network and displaying it in another location. Which two components are required. At minimum. To provide this functionality? (Choos two.
A. Cisco Media Experience Engine 3500
B. Cisco TelePresence Content Server
C. Cisco Digital Media Player
D. Cisco Digital Media Manager
E. Cisco Digital Media Encoder
An engineer wants to stream Cisco TelePresence high-definition video to another location. The stream must be connected to an HDMI input on a display. Which two components. At minimum, are required to provide this functionality? (Choose two.)
A. Cisco Media Experience Engine 3500
B. Cisco TelePresence Content Server
C. Cisco Digital Media Player
D. Cisco Digital Media Manager
E. Cisco TelePresence Server
A Cisco engineer needs to provide digital media for the lobby of a company. Which Cisco Digital Media component should the engineer use?
A. Cisco Cast
B. Cisco Digital Signs
C. Cisco DMP
D. Cisco Show and Share
E. Cisco IPTV
An engineer is deploying Cisco Digital Media Players throughout the enterprise to provide digital signs. Which three Cisco Digital Media Players can the engineer use? (Choose three.)
A. Cisco Edge 340
B. Cisco Edge 350 Digital Media Player
C. Cisco Digital Media Player 4305
D. Cisco Digital Media Player 4310G
E. Cisco Digital Media Player 4400G
F. Cisco Digital Media Player 4500
A customer wants to purchase a video endpoint that supports a touchscreen control. The engineer recommends a Cisco TelePresence MX300 endpoint. Which information about this endpoint should the engineer tell the customer?
A. The endpoint comes with the 8~inch touchscreen by default. You can purchase the 10-inch touchscreen with an additional cost.
B. The endpoint comes with the 8-inch touchscreen by default. You do not have the option to purchase the 10-inch touchscreen.
C. You can purchase the endpoint with either the 8-inch touchscreen or the 10-inch touchscreen. You need an additional option key for the 10-inch touchscreen.
D. The endpoint comes with the 10~inch touchscreen by default. You do not have the option to purchase the endpoint with the 8-inch touchscreen.
An engineer is deploying a Cisco TelePresence Touch 8 controller for a Cisco TelePresence SX20. Which two steps are required as part ofthis process? (Choose two.)
A. Connect the cable from the Touch 8 controller to the Cisco TelePresence SX20.
B. Connect the Touch 8 controller to the power adapter and connect the adapter to the network.
C. Connect the Touch 8 controller to the secondary network adapter on the Cisco TelePresence SX20.
D. Reboot the Cisco TelePresence SX20.
E. Hold the mute button down for 20 seconds while you power on the Touch 8 controller.
Which video input port is available on a Cisco DX80?
A. DVl-D
B. DVl-A
C. VGA
D. HDMI
The microphone on a Cisco TelePresence System 3000 is switching incorrectly to a camera that does not have an active speaker. What is the first step that an engineer should take to troubleshoot this issue?
A. Check whether the microphone is properly plugged in.
B. Run the microphone calibration procedure.
C. Plug all microphones into the primary codec.
D. Check whether the cable from the microphone is plugged into the correct receptor on the codec.
A company wants to enable a mobile user to connect to the corporate network to access calls. messages. Video conferencing. And web collaboration. Which product provides these features for the user?
A. Cisco WebEx Connect
B. Cisco Unified Presence
C. Cisco TelePresence 8X20
D. Cisco Jabber
An engineer is configuring mobile and remote access. Which three configuration tasks should the engineer perform? (Choose three.)
A. Manually configure a Cisco Unified Communications Manager neighbor zone on the Cisco Expressway Core.
B. Add the Cisco Unified Communications Manager root certificate to the Cisco Expressway Core CTL.
C. Enable TLS verify mode for the traversal zone.
D. Add the Cisco Unified Communications domain before enabling services on the Cisco Expressway Core.
E. Enable H.323 on the Cisco Unified Communications Manager neighbor zone.
F. Add the Cisco Expressway Edge root certificate to the Cisco Unified Communications Manager CTL.
A customer is looking for a Cisco TelePresence Immersive System that is designed for at least seven participants. Which two products meet this customer’s requirements? (Choose two.)
A. Cisco TelePresence CTS3022
B. Cisco TelePresence TX9000
C. Cisco TelePresence TX9200
D. Cisco TelePresence IX5000
E. Cisco TelePresence IX5200
F. Cisco TelePresence TX1310-65
Which bridge solution requires Cisco TelePresence Conductor?
A. Cisco TelePresence Server operating in remotely managed mode
B. Cisco TelePresence Server operating in locally managed mode
C. Cisco TelePresence MCU operating in remotely managed mode
D. Cisco TelePresence MCU operating in locally managed mode
Which two feature keys are valid for both Cisco TelePresence MCU and Cisco TelePresence Server? (Choose two.)
A. video firewall
B. Web conferencing
C. encryption
D. Cluster support
E. third-party interoperability
{"name":"Bubla 1", "url":"https://www.quiz-maker.com/QPREVIEW","txt":"How does a Cisco TCS process incoming video calls?, A customer wants to record Cisco TelePresence conferences with the ability to alter the video format and add captions. Which two products are recommended to accomplish this goal? (Choose two.), Which three features are supported by the Cisco Video Surveillance Encoding Server? (Choose three.)","img":"https://www.quiz-maker.com/3012/images/ogquiz.png"}