Bubla 2
You want to output SIP messaging to the console of a Cisco TelePresence endpoint running Cisco TelePresence Conductor software. Which two commands can you enter into the CLI together to accomplisl this goal? (Choose two.)
A. Log ctx SipPacket debug 9
B. Log output on
C. Log ctx output
D. log SipPacket debug 9
E. Log output console
You want to find a list of all recent call attempts on a Cisco VCS Expressway and the details of attempts to route these calls. You want to know if the requested address was found and if any transformations occurred. Which page on a Cisco VCS Expressway gives you all of this information?
A. Policy Services
B. Registration History
C. Search History
D. Zones
Which type of Cisco VCS log shows call routing decisions that are made based on Cisco VCS search rules?
A. Event Log
B. Configuration Log
C. Network Log
D. System Log
A video engineer needs to locate the running version ofthe Cisco VCS. Which tab contains this information?
A. System
B. Applications
C. Configuration
D. Status
For Cisco TelePresence endpoints with TC7.0 software. configuration backup and restore appears where?
A. Call Control tab
B. Configuration tab
C. Diagnostics tab
D. Maintenance tab
E. Home tab
An engineer needs to connect an external display to a Cisco TelePresence MX700 endpoint. What must the engineer do to access the external monitor output connector?
A. Remove the cover under the main monitor. The cover is fastened with two screws.
B. Remove the cover on the back ofthe system. The cover is fastened with magnets.
C. Remove the cover on the right side of the system. The cover is fastened with four screws.
D. Remove the cover on the left side of the system. The cover is fastened with magnets.
You are deploying a Cisco VCS Expressway with the Advanced Networking option key into two separate DMZs. Gateways for all networks are the lowest usable IP address in the subnet. While you are logged in as an admin user, which command should you enter into the CLI, to enable IP routing to the Cisco VCS Control and nothing else on the internal network?
A. xConfiguration lP Gateway: 172.18.105.1
B. xConfiguration RouteAdd Address:192-188-10.25 PrefixLengthz16 Gateway: 172.18.105-1 Interface: LAN1
C. xCommand RouteAdd Address:192.168.0.0 PrefixLength:16 Gateway: 172.18.105.1 Interface: LAN1
D. xCommand RouteAdd Address:192.168.10.25 PrefixLengthz32 Gateway: 172.18.105.1 Interface: LAN1
A network engineer wants to check the local system call ID on a Cisco TelePresence Immersive System. Which CLI command should the engineer use?
A. Show call statistics addin
B. Show call statistics all
C. Show call statistics audio
D. Show call status
E. Show call statistics video
A network administrator is troubleshooting a video issue from the Cisco VCS CLI and wants to see the ongoing calls. Which command should the administrator use?
A. xconfiguration calls
B. Xcommand calls
C. Xcalls status
D. Xstatus calls
A user is unable to make a video call from an endpoint that is registered to the Cisco VCS. To isolate the cause. Which two menu choices should the user check first? (Choose two.)
A. Configuration > Call Policy
B. Status > Registrations
C. Status > Search History
D. Status > System Information
E. Configuration > Dial Plan > Search Rules
F. Status > Event Log
An engineer is consistently seeing tickets in the Cisco TMS that are generated when a video endpoint is powered off each day. Which menu path allows the engineer to prevent this type ofticket from bein create
A. TMS > Clear this ticket
B. TMS > Acknowledge ticket
C. TMS > Ignore ticket type for this system
D. TMS > Ticket management
E. TMS > Manage ticket error levels
A customer wants a Cisco TelePresence MCU solution that supports up to 40 FullHD 1080p sessions. Which solution should the customer use?
A. A stack of Cisco TelePresence MCU 53205
B. A stack of Cisco TelePresence MCU 4520
C. a Cisco TelePresence MSE 8000 with clustered Cisco TelePresence MCU MSE 8420S
D. a Cisco TelePresence MSE 8000 with clustered Cisco TelePresence MCU MSE 8510S
What do you call the process when one bridge calls into another bridge so that participants on both bridges can see and hear each other?
A. traversing
B. interworking
C. flowing
D. cascading
When you are on a call that is hosted on a Cisco TelePresence MCU. Which function is enabled when you enter the numeric sequence '6?
A. Request the floor
B. mute/unmute audio
C. Merge another call
D. Cycle layout options
A customer requests a configuration that enables users to easily add a third party to an existing call. The environment contains only three Cisco TelePresence C40 codecs and one Cisco VCS. To achieve the customer's requirements. Which feature should be added?
A. Cisco MultiWay
B. Cisco TelePresence Conductor
C. Cisco TMS
D. Cisco Multisite
E. Cisco VCS Expressway
When you configure a zone for firewall traversal. Which type ofzone is the Cisco VCS~C configured for?
A. client
B. server
C. proxy
D. gateway
E. neighbor
On the Cisco VCS-E. What is the default port number for the H.323 connection on the first traversal zone between a Cisco VCS-C and Cisco VCS-E?
A. 1719
1720
5060
6001
7001
Which component provides flexible options for storing video and audio using a combination of network-attached storage. direct-attached storage. and SAN storage deployments?
A. Cisco Video Surveillance Media Server
B. Cisco Video Surveillance Virtual Matrix Software
C. Cisco Video Surveillance Storage System
D. Cisco Video Surveillance Transcoding and Encoding Server
E. Cisco lSR Video Management and Storage Module
Which option is the embedded component that enables endpoints and collaboration applications to support medianet functionality?
A. Media Services Interface
B. Open API
I C. XMPP
I C. XMPP
E. Medianet Agent
F. SDN
What is the maximum number of servers that a Cisco TelePresence Content Server cluster can have?
6
7
8
10
12
An engineer is configuring a live stream from a multiparty conference that users can watch live in their web browser. Which two products can provide native live streaming in this delivery format? (Choose two.)
A. Cisco Video Communications Server
B. Cisco TelePresence Server
C. Cisco TelePresence MCU
D. Cisco TelePresence Content Server
E. Cisco Multiparty Media Server
F. Cisco TelePresence Conductor
An engineer is deploying a Cisco Media Experience Engine 3500 to provide various capabilities for ingesting and processing video media and production capabilities. Which two advances does the Cisco MXE 3500 provide? (Choose two.)
A. Automated graphical integration that can embed metadata overlays on videos during processing
B. over 2 terabytes of storage for both local and streaming media applications
C. Automated ingesting of video files based on watch folders
D. Clustering capability of up to 20 resource nodes to handle and balance incoming media requests and processing
E. Live output abilities to provide DV. DVC Pro, DVC Pro 50. and DVC Pro HD format streams
F. Ability to create VoD file outputs to WebEx ARF format
An engineer is deploying a Cisco TelePresence Content Server. Which two services are provided by this product? (Choose two.)
A. Video storage
B. multiconferencing
C. scheduler
D. Video conferencing
E. Video recording
F. Video overlay
Which three standards are supported for streaming live video on Cisco TCS? (Choose three.)
A. H.265
B. H.261
C. H.264
D. H.263
E. H.262
F. H.270
A video engineer configured Cisco TMS to allow conference scheduling. The engineer set the Default Reservation Type for Scheduled Calls to Automatic Connect. Which option describes what this action accomplished?
A. No conference resources are scheduled until a Cisco TelePresence form is selected.
B. Calls are set up and launched by the organizer.
C. WebEx invites for conferencing are sent automatically.
D. Conferences are automatically started at the scheduled time.
A client requires a versatile desktop video system that supports dual monitors and the multisite option. Which device should be recommended to the customer?
A. Jabber Video client with PrecisionHD camera
B. Cisco TelePresence EX60 system
C. Cisco TelePresence MX200 system
D. Cisco TelePresence EX90 system
A company is investigating the purchase of desktop video endpoints. But requires them to have DVl-l inputs for sharing content. Which desktop video endpoint model supports DVl-l inputs?
A. MX700
B. MX800
C. EX60
D. DX650
Which all-in-one dual-screen solution can be used for an average meeting room without the need for external monitors?
A. MX700
B. MX30062
C. EX90
D. 8X80
E. TX9000
F. MX20062
A company acquired immersive Cisco TelePresence devices and they are setting them up in a dedicated Cisco TelePresence room. Which two options are recommendations for the lighting ofthe room? (Choose two.)
A. Direct lighting
B. Lighting of5000K to 5100K
C. Color rendering index of 82 and above
D. Lighting of 4000K to 4100K
E. Facial lighting between 400 to 600 lux
Which kind of cable is used to daisy chain one PrecisionHD camera to another?
A. HDMI cable
B. standard Ethernet cable
C. 089 to RJ45 cable
D. VISCA control cable
Which kind of profile is shown?
A. TC WebAdmin H.323 Profile
B. TC WebAdmin SIP Profile
C. TX WebAdmin SIP Profile
D. TC WebAdmin Conference Profile
A network engineer is installing a Cisco TelePresence MX200 with two microphones in a conference room. How far from each other do the microphones need to be installed?
1m
2m
3m
4m
An en?d user reports that the video they are receiving from a CTS-500 is showing a heavy blue tint. The room sending the video uses indoor artificial lighting. Which procedure must be performed to resolve the issue
A. Camera focus balance calibration
B. Camera brightness mode: indoor
C. Camera auto adjustment
D. Camera auto adjust room environment
E. Camera temperature map adjustment
Which three Cisco TelePresence endpoints support hosting embedded multisite conferences? (Choose three.)
A. EX60
B. EX90
C. C20
D. C90
E. SX10
E. SX20
G. Jabber Video for Cisco TelePresence
Which three features does a Cisco TelePresence Content Server provide that a Cisco MCU cannot? (Choose three.)
A. Conference bridge virtualization support
B. Multiple conference layouts
C. Resource optimization via conductor
D. 720p resolution at 60 fps
E. 1080p resolution at 60 fps
F. Multiscreen immersive room endpoint support
Cisco TelePresence Immersive Endpoint devices support a feature that allows objects. documents. or PC applications to be presented in a plug-and-play fashion. What is this feature called?
A. Cisco TelePresence Content Sharing
B. Cisco TelePresence Auto Collaborate
C. Cisco TelePresence Multichannel
D. Cisco TelePresence Content Stream
{"name":"Bubla 2", "url":"https://www.quiz-maker.com/QPREVIEW","txt":"You want to output SIP messaging to the console of a Cisco TelePresence endpoint running Cisco TelePresence Conductor software. Which two commands can you enter into the CLI together to accomplisl this goal? (Choose two.), You want to find a list of all recent call attempts on a Cisco VCS Expressway and the details of attempts to route these calls. You want to know if the requested address was found and if any transformations occurred. Which page on a Cisco VCS Expressway gives you all of this information?, Which type of Cisco VCS log shows call routing decisions that are made based on Cisco VCS search rules?","img":"https://www.quiz-maker.com/3012/images/ogquiz.png"}