FS Czech
FS Czech Engineering Quiz
Test your knowledge with our challenging FS Czech quiz! This quiz covers a variety of engineering and technical topics that are crucial for anyone looking to excel in the field.
Challenge yourself with questions on:
- Mechanical Systems
- Electrical Circuits
- Automotive Engineering
- Physics Principles
What are the revolutions per minute of a synchronous 10-pole pairs motor when attached to the standard three-phase 230V grid.
1500
3000
600
300
How many sets of tyres are allowed to be used during all dynamic events:
Not restricted and tyre set choice is based on track condition.
Only one set of tires per type (dry/wet) may be used during all the dynamic events. The brake test, practice area and the static events are included from this regulation.
Only one set of tires per type (dry/wet) may be used during all the dynamic events. The brake test, practice area and the static events are excluded in this regulation.
Restricted by the event (specified in the Handbook).
Where do you need to mount the LVMS?
In the middle of a completely red circular area of >= 45 mm diameter.
In the middle of a completely red circular area of >= 50 mm diameter.
In the middle of a completely orange circular area of >= 45 mmdiameter.
In the middle of a completely orange circular area of >= 50 mm diameter.
A spring mass system has a mass of 1kg, a spring constant of 100 N/m and damping coefficient of 15. The system is:
Underdumped
Critically damped
Overdamped
Undumped
A pin joined uniform rigid rod of weight W and length L is supported horizontally by an external force F as shown in figure below. The force F is suddenly removed. At the instant of force removal, the magnitude of vertical reaction developed at the support is
0
W/A
W/2
W
In the circuit shown below, the knee current of the ideal Zener dioide is 10 mA . To maintain 5 V across RL, the minimum value of RL in W and the minimum power rating of the Zener diode in mW, respectively, are
125 and 125
125 and 250
250 and 125
250 and 250
When seated normally in your car, the driver has a field is vision of 210 degrees. Your lead enginner is decided to place the air intake on the left side of your vehicle, therefore the field is vision is different per side: 90 on the left side and 120 degrees on the right side. These field of vision angles are achieved when the driver fully turns their head. What can you say about field of vision?
The team must install a mirror on both sides of the car
The team must install at least one mirror on the left side of the car
The team must install at least one mirror on the right side of the car
The field of vision is compliant with the rules, no mirrors need to be installed
During the brake test, your driver fails to lock the wheels, but the vehicle comes to a complete stop. After analyzing the results you have the following data: Vehicle speed before braking point: 54 km/h Distance between braking point and complete stop: 15 m Time between braking point and complete stop: 2 s Resultant force during braking: 1350 N
160kg
180kg
200kg
220kg
{"name":"FS Czech", "url":"https://www.quiz-maker.com/QPREVIEW","txt":"Test your knowledge with our challenging FS Czech quiz! This quiz covers a variety of engineering and technical topics that are crucial for anyone looking to excel in the field.Challenge yourself with questions on:Mechanical SystemsElectrical CircuitsAutomotive EngineeringPhysics Principles","img":"https:/images/course1.png"}