Bubla 3

Which two video endpoints can you set back to factory reset by using physical button presses? (Choose two.)

A network administrator is manually conﬁguring a Cisco TelePresence MX300 endpoint. Which two pieces of information must the administrator introduce. In order for the system to properly register to a CI: Uniﬁed Communications Manager or to a Cisco TelePresence Video Communications Server? (Choose two.)

A. the MAC address of the Cisco TelePresence MX300 endpoint

B. a SIP URI

C. The name ofthe Cisco Uniﬁed Communications Manager server or Cisco VCS server

D. an IP address for the endpoint

A Cisco 8X20 is registered to Cisco Uniﬁed Communications Manager. It cannot place calls. It is conﬁgured with SIP URI 1007 and when traces are run. SIP Forbidden and Unknown calling DN errors are found. Which statement describes the problem?

A. The wrong network IP address is assigned to device.

B. The AOL is blocking port 5060 from device.

C. H.323 is not conﬁgured correctly.

D. SIP URI does not contain IP address or hostname.

In which two locations can you ﬁnd registration information for a video endpoint? (Choose two.)

A. From the endpoint touch panel on the Settings > System Information screen

B. From the endpoint web interface on the Home screen

C. From the Cisco VCS in the Status > System screen

D. From the Cisco TMS on the Systems > Provisioning screen

Which two methods can be used to retrieve the status of a Cisco TelePresence codec endpoint? (Choose two.)

A. From the codec web GUI. choose Troubleshooting > System Status.

B. From the codec web GUI. choose Diagnostics > System Status.

C. From the codec web GUI. choose Conﬁguration > System Status.

D. Run the xstatus command from the CLI.

E. Run the xcommand status command from the CLI.

An H.323 endpoint that is registered to Cisco VCS Control is not able to make 828 calls. Calls to other internal endpoints are working ﬁne. What is the likely cause ofthe issue?

A. The Conductor H.323 zone is set to "Off."

B. The Traversal Zone H.323 zone is set to "Off."

C. The Production CUCM H.323 zone is set to "Off."

D. The Traversal Zone H.323 zone is in 3 "Failed" state.

Avideo engineer has opened a ticket with Cisco TAC for support and the TAC engineer has requested system information such as software version of Cisco VCS. Where does the video engineer ﬁnd this information?

A. System

B. Maintenance

C. Conﬁguration

D. Status

Which option performs a factory reset of a Cisco TelePresence System endpoint?

A. Conﬁguration > System Settings

B. Conﬁguration > Security Settings

C. Troubleshooting > Hardware setup

D. Monitoring

E. Troubleshooting > Conﬁguration Issues

F. Troubleshooting > System Restart

G. Cisco TelePresence System endpoint can be reset only via CLI.

What is the proper procedure to manually reset 3 password on a Cisco TelePresence EX Series endpoint running software version TC7?

A. Use SSH to access the device and use the username "cisco" and the password "TANDBERG."

B. Hold down the mute key on the touch display for 25 seconds and reset the password using the touch screen.

C. When the device is powered down. Hold down the power button until the power light blinks twice. Then press the power button twice.

D. Tap the power button four times within ten seconds and then use Telnet to connect to the device IP address.

E. Tap the power button ﬁve times while the device is powered off and when it boots. use Telnet to connect to the device within 60 seconds.

In order to perform a password recovery for the admin user on a Cisco VCS appliance. What must an engineer do?

A. Connect via Telnet to the Cisco VCS.

B. Connect to the serial port.

C. Connect via SSH.

D. Connect to LAN port 1.

Which command returns the Cisco VCS to its factory default settings?

Which CLI command should be run to resolve these alarms on a Cisco VCS?

A. xcommand DefaultValuesSet

B. xconﬁguration DefaultLinksAdd

C. xcommand DefaultLinksAdd

D. xconﬁguration DefaultValuesSet

A technician enters the diag system normal command for a Cisco TelePresence System endpoint. Which action must be done in the CLI before entering this command?

A. Logging must be enabled.

B. Calling services must be stopped.

C. All forced upgrades must be cleared.

D. The Telephone_Srvr service must be restarted.

Which CLI command must be used to conﬁgure the network settings on a Cisco TelePresence 4500 MCU?

A. Static A []

B. Network ip

C. Xconﬁg network address

D. Xconﬁg network address

Which option describes how to conﬁgure SNMP settings on a CTS/IX endpoint?

A. Can be conﬁgured only via codec CLI

B. Can be conﬁgured only via codec GUI

C. Can be conﬁgured only in a device proﬁle in Cisco Uniﬁed Communications Manager

D. Can be conﬁgured either via codec GUI or codec CLI

E. Can be conﬁgured in codec GUI. codec CLI. Or device proﬁle in Cisco Uniﬁed Communications Manager

An engineer is receiving several Cisco TMS email alerts for system phonebooks that are not updating. Which menu path should the engineer use to suppress these Cisco TMS email alerts?

Which conference types can occur at anytime without the need for the conference to be scheduled. And can be created as permanent conferences?

A Cisco TelePresence Server is operating in locally managed mode. In which two ways can a Cisco EX60 user who is connected to a conference that is hosted on a Cisco TelePresence Server change the screen layout? (Choose two.)

A. Using the remote control

B. using DTMF keys 2 and 8

C. using FECC

D. Via the Cisco TelePresence server GUI

A customer owns three Codian 5300 MCUs with several video endpoints. Users complain that they are getting multipoint control unit port capacity errors when scheduling video conferences in Cisco TMS. What can be done to correct these errors automatically?

A. Enable the Automatic MCU Cascading option in the Cisco TMS Conference Settings.

B. Install a Cascading option key on the Cisco TMS server.

C. Install a Cisco TelePresence Conductor server.

D. Install cascaded multipoint control units.

Video conference bridges accomplish their conferencing functionality by doing media transcoding or media switching. What are the three main advantages of media switching? (Choose three.)

A. Extreme low latency

B. Endpoints that can customize layouts

C. The ability to upscale low-resolution video

D. Lower cost per port

E. Typically higher port capacity

F. The ability for endpoints to connect at different bandwidth speeds and resolutions

A customer requires scheduled Cisco TelePresence video conferencing and the capability for ad hoc conferencing. Which product would be recommended for the customer?

A. Cisco TMS and an MCU with port capacity that can fulﬁll both needs

B. Cisco TMS with an MCU and Cisco Uniﬁed CM with an MCU

C. Cisco TMS with two MCUs

D. Cisco Uniﬁed CM with two MCUs

E. Cisco Conductor with an MCU

F. Cisco Conductor integrated with Cisco TMS and an MCU

Unlock and Upgrade

Remove all limits from your Quizzes

Bubla 3

More Quizzes