Measurement Workstation - 20 Questions - Alternative | Take the Quiz

What is the Measurement Station's responsibility?

Measure parts length

Accurately collecting Length, Width, Height and Weight of parts

Measuring the parts packaging

Accurately Photographing parts

When processing parts at the measurement station, you should always be wearing...

Gloves and Steel-toe boots

Safety Glasses

Safety Vest

All of the above

Which Measurement will always be the shortest Measurement?

Height

Weight

Length

Width

When measuring a simple pipe, how would you measure the length?

With a tape measure, as usual

With the flexible tape measure for deployed length

With the laser measurement device

With the scanner

When Measuring a part, where is the best place to put the part to ensure an accurate Measurement?

Center of the workbench

On the ground

Squared up to the back and side walls

On the line

After finishing the last part on the line, what actions should you take?

Wait around until there are more parts to process

Move to any station you choose

Ask your supervisor which station needs help

Surf the internet on your workstation computer

What is a Box-Size Measurement?

A Measurement of the Box the part was shipped in

A Measurement of the Workstation

A Measurement inside the Box the part shipped in

A Measurement used for Problematic Groups to capture additional Measurement data

Which measurement should always be the longest measurement?

Width

Height

Weight

Length

When Measuring Height, where should you Measure?

From the workbench to the highest point on the part

The widest side of the part

The longest side of the part

Inside the part

How accurate do we like to keep our measurements?

Within 1 foot

Within 1 inch

Within 1/4 inch

With 1/8 inch

What would indicate that a part needs to be Measured a special way?

Your Supervisor tells you so

The Measurement Allocation section in the Exaparts system

The part is large

The part is small

Before starting your measurements on a part, what steps should you take?

Just grab the part and start measuring

Scan the barcode, remove the part from the tote and inspect the tote for secondary pieces

Scan the barcode, remove the packaging and measure the tote

Scan the tote, remove the secondary pieces and measure the barcode

What are some tools you will need to Measure small parts?

Yard stick

Crane and Crane Scale

Camera and Tape Measure

Tape Measure and Precision Scale

If a part is too heavy to lift onto your workstation, what actions should you take?

Skip that part

Measure the part on the conveyor

Ask your supervisor or a coworker for help

Use the forklift

When taking a Box-Size Measurement, how should you stack any secondary pieces on the main part?

As high as you can

Very Carefully

In the box

In the smallest area possible without damaging any pieces

When is it appropriate for you to wear headphones while processing parts?

Always

Never

Once a day

Twice a week

After sending your completed part on to Photography, what would be the next step?

Take a part from the line and begin processing

Log out of your Workstation and talk to a friend

Check with your Supervisor for more work

Check the Rejection cart for any rework parts

What would indicate that the part will need a box-size measurement?

The part is assigned a problematic group or special analysis category

The part looks funny

The part is very big

The part is shaped like a box

What should you always double-check at the Measurement Station?

All manually typed Measurements

The time

Your Tape Measure

The Scale Accuracy

When opening a part at the measurement workstation, what process should you follow?

Cut down the middle

Cut it open quickly

Parts should already be open when they reach the measurement workstation

Be sure to open all packaging

Unlock and Upgrade

Remove all limits from your Quizzes

Measurement Workstation - 20 Questions - Alternative

More Quizzes