Testing Quiz Part 3
When IPv4 addressing is manually configured on a web server, which property of the IPv4 configuration identifies the network and host portion for an IPv4 address?
DNS server address
Subnet mask
Default gateway
DHCP server address
Which two roles can a computer assume in a peer-to-peer network where a file is being shared between two computers? (Choose two.)
Client
Master
Server
Slave
Transient
Which two protocols operate at the highest layer of the TCP/IP protocol stack? (Choose two.)
DNS
Ethernet
IP
POP
TCP
UDP
What is one difference between the client-server and peer-to-peer network models?
Only in the client-server model can file transfers occur.
Every device in a peer-to-peer network can function as a client or a server.
A peer-to-peer network transfers data faster than a transfer using a client-server network.
A data transfer that uses a device serving in a client role requires that a dedicated server be present.
What is the function of the HTTP GET message?
To request an HTML page from a web server
To send error information from a web server to a web client
To upload content to a web server from a web client
To retrieve client email from an email server using TCP port 110
Which networking model is being used when an author uploads one chapter document to a file server of a book publisher?
Peer-to-peer
Master-slave
Client/server
Point-to-point
What network service resolves the URL entered on a PC to the IP address of the destination server?
DNS
DHCP
FTP
SNMP
A network engineer is analyzing reports from a recently performed network baseline. Which situation would depict a possible latency issue?
A change in the bandwidth according to the show interfaces output
A next-hop timeout from a traceroute
An increase in host-to-host ping response times
A change in the amount of RAM according to the show version output
Which firewall feature is used to ensure that packets coming into a network are legitimate responses to requests initiated from internal hosts?
Stateful packet inspection
URL filtering
Application filtering
Packet filtering
What is one indication that a Windows computer did not receive an IPv4 address from a DHCP server?
The computer cannot ping 127.0.0.1.
Windows displays a DHCP timeout message.
The computer receives an IP address that starts with 169.254*
The computer cannot ping other devices on the same network with IP addresses in the 169.254.0.0/16 range.
Which command can an administrator issue on a Cisco router to send debug messages to the vty lines?
Terminal monitor
Logging console
Logging buffered
Logging synchronous
Fill in the blank. During data communications, a host may need to send a single message to a specific group of destination hosts simultaneously. This message is in the form of a BLANK message
Multicast
A medium-sized business is researching available options for connecting to the Internet. The company is looking for a high speed option with dedicated, symmetric access. Which connection type should the company choose?
DSL
Dialup
Satellite
Leased line
Cable modem
What is the purpose of having a converged network?
To provide high speed connectivity to all end devices
To make sure that all types of data packets will be treated equally
To achieve fault tolerance and high availability of data network infrastructure devices
To reduce the cost of deploying and maintaining the communication infrastructure
What characteristic of a network enables it to quickly grow to support new users and applications without impacting the performance of the service being delivered to existing users?
Reliability
Scalability
Quality of service
Accessibility
After several configuration changes are made to a router, the copy running-configuration startup-configuration command is issued. Where will the changes be stored?
Flash
ROM
NVRAM
RAM
The configuration register
A TFTP server
Refer to the exhibit. From global configuration mode, an administrator is attempting to create a message-of-the-day banner by using the command banner motd V Authorized access only! Violators will be prosecuted! V When users log in using Telnet, the banner does not appear correctly. What is the problem?
The banner message is too long.
The delimiting character appears in the banner message.*
The symbol “!” signals the end of a banner message.
Message-of-the-day banners will only appear when a user logs in through the console port.
What are three characteristics of an SVI? (Choose three.)
It is designed as a security protocol to protect switch ports.
It is not associated with any physical interface on a switch.
It is a special interface that allows connectivity by different types of media.
It is required to allow connectivity by any device at any location.
It provides a means to remotely manage a switch.
It is associated with VLAN1 by default.
A technician configures a switch with these commands:SwitchA(config)# interface vlan 1 SwitchA(config-if)# ip address 192.168.1.1 255.255.255.0 SwitchA(config-if)# no shutdownWhat is the technician configuring?
Telnet access
SVI
Password encryption
Physical switchport access
In computer communication, what is the purpose of message encoding?
To convert information to the appropriate form for transmission
To interpret information
To break large messages into smaller frames
To negotiate correct timing for successful communication
{"name":"Testing Quiz Part 3", "url":"https://www.quiz-maker.com/QPREVIEW","txt":"When IPv4 addressing is manually configured on a web server, which property of the IPv4 configuration identifies the network and host portion for an IPv4 address?, Which two roles can a computer assume in a peer-to-peer network where a file is being shared between two computers? (Choose two.), Which two protocols operate at the highest layer of the TCP\/IP protocol stack? (Choose two.)","img":"https://cdn.poll-maker.com/23-904109/36489.jpg?sz=1200"}