Rulebook Test
Rulebook Test Quiz
Welcome to the Rulebook Test Quiz designed for students and teams participating in engineering competitions. This quiz will help you assess your understanding of the competition rules and guidelines.
Take this opportunity to:
- Test your knowledge of class regulations
- Prepare for upcoming iterations of the competition
- Enhance your team's strategy for success
Officials do not reserve the right to change the status of a Class II team to Class I, at their discretion.
True
False
Failure of a team member to follow an instruction or command directed specifically to that team or team member will result in _____ penalty points being deducted from the team's
25, Event score
20 points, Overall score
20, Overall Score
25, Overall Score
The appointed Faculty Advisor must be the participating institution's Faculty member and the individual should have completed their undergraduate studies _________ prior to assuming such a post.
3 Years
4 Years
36 Months
A & C
What should be the angle for lap belt of driving position for reclined
45° and 65° with respect to vertical
60° and 80° with respect to vertical
60° and 80° with respect to horizontal
60° and 85° with respect to horizontal
The head resistant must have at least
Maximum width 150 mm
Padding energy absorption minimum thickness 40 mm
It's attachments and mounting must withstand force 890 N
B & C
Each team must have a removable device that lifts up the vehicle, so that all driven wheels are _________ off the ground and the vehicle is adequately supported. All non driven wheels must not touch anything else than the ground.
At least 10 cm
Maximum 100 mm
At least 10 mm
Minimum 100 cm
Repeated actuation of the switch must not close the shutdown circuit, and it must be designed so that the driver cannot reset it.
True
False
All fasteners attaching scatter shields and guards must be _____ metric grade ____ or stronger
4mm, 12.9
6mm, 8.8
6mm, 12.6
8mm, 12.9
Prior to the tilt test specified in IN7, engines fitted with mechanically actuated fuel pumps must be run to fill and pressure the system upstream of the high pressure pump.
True
False
In post autocross inspection , how much penalty is imposed on a team which Violates the rules without advantage for themselves .
0.5s
2s
1s
3s
Measurements will be made with a free-field microphone placed free from obstructions at the exhaust outlet level, ______ from the end of the exhaust outlet, at an angle of _____ with the outlet in the horizontal plane.
0.5cm, 45°
0.5m, 60°
0.25cm, 45°
0.5m, 45°
The top teams from Class II will be judged BPP finals at the competition. The teams will be notified _________ before the competition dates.
At least 5 days
Maximum 10 days
At least 10 days
Minimum 30 days
Changes to the CRD will not be permitted before the deadline.
True
False
In Endurance event slaloms spacing is
7.5cm to 12m
9m to 15cm
7.5m to 15m
9m to 15m
The driver must pull into the driver change area for a mechanical inspection of the vehicle, something has been observed that requires a closer inspection.
Blue Flag
Black Flag
Black Flag with orange dot
Red Flag
{"name":"Rulebook Test", "url":"https://www.quiz-maker.com/QPREVIEW","txt":"Welcome to the Rulebook Test Quiz designed for students and teams participating in engineering competitions. This quiz will help you assess your understanding of the competition rules and guidelines.Take this opportunity to:Test your knowledge of class regulationsPrepare for upcoming iterations of the competitionEnhance your team's strategy for success","img":"https:/images/course3.png"}