All edges of the bodywork that could come into contact with a pedestrian must have a minimum radius of ________.

The steering wheel must be no more than _____rearward of the front hoop.

If a member of the primary structure is a bent tube or made from multiple tubes an additional tube must support it. This support tube must be angled ________from the plane of the supported tubes.

The test fixture must support the entire sample, except for a _______ hole aligned co-axially with the punch.

With a “reclined driving position”, in side view the lap belt must be between an angle of 60° and 80° to the Vertical.

Mesh or perforated material may be used but must prevent the passage of a_______ diameter object through the guard.

Any aerodynamic device must be able to withstand a force of _______ applied in any direction at any point and not deflect more than_____

Teams that use self-made fasteners will need to present documentation with appropriate reasoning, calculations and testing during the mechanical inspection.

The competition technical inspection stickers will be placed on the side portion of the vehicle

Measurements will be made with a free-field microphone placed free from obstructions at the exhaust outlet level, _______from the end of the exhaust outlet, at an angle of ______with the outlet in the horizontal plane

The overall engineering design event maximum scoring is _____

The driver must come to an immediate safe and controlled stop on the course and must follow track marshals directions.

The driver must pull into the driver change area for discussion with the officials concerning an incident. A time penalty may be assessed.

The inner circles are ______ in diameter and the outer circles are____ in diameter.

Fuel pumps must be on and fuel valves must be opened during refueling.