Ruel book quiz
Ruel Book Quiz
Test your knowledge about the Ruel book and its associated rules! This quiz covers various important aspects and regulations that every enthusiast should know.
Prepare for challenging questions that will help you gauge your understanding of key concepts.
- Multiple-choice questions
- Covering topics like safety, design, and regulations
- Fun and engaging format
DNF
Did None Finish
Did Not Finish
Did Not Fall
Do Not Finish
In dynamic event, The points for efficiency is __________
150 points
110 points
100 points
120 points
Cranking engines in pits is not allowed.
False
True
The bodywork in front of the front wheels must have a radius of at least_______ mm extending at least _______relative to the forward direction, along the top, sides and bottom of all affected edges.
38 , 40°
35 , 45°
30 , 45°
38 , 45°
Both roll hoops must have one _______ hole in a non-critical straight location and its surface at this point must be unobstructed for at least _______.
1.5 mm , 180°
4.5 mm ,180°
3.5 mm ,160°
2.5 mm, 180°
The brake pedal and its mounting must be designed to withstand a force of 2 N without any failure of the brake system or pedal box.
False
True
Any catch can must vent through a hose with a minimum internal diameter of _________down to the bottom level of the chassis and must exit outside the bodywork.
2 mm
8 mm
3 mm
5 mm
LV batteries must be protected from short circuits, not more than _________from ungrounded terminals.
120 mm
150 mm
100 mm
110 mm
The tilt test will be conducted with all vehicle fluids at their minimum fill level.
True
False
The track is slippery or something is on the racing surface that should not be there. The driver must be prepared for evasive maneuvers to avoid the situation.
Green and yellow striped flag
Red and black striped flag
Black and yellow striped flag
Red and yellow striped flag
In Acceleration event, Cones are placed along the course at intervals of about ________.
7 m
3 m
5 m
3.5 m
________ points are awarded to every team that finishes endurance without DNF or DQ.
20
25
35
50
Any aerodynamic device must be able to withstand a force of _______ applied in any direction at any point and not deflect more than ______
25 N,25 mm.
55 N,25 mm.
50 N,20 mm.
50 N,25 mm.
The shoulder harness mounting points must be between ____________ apart, measured center to center.
120 mm and 230 mm
180 mm and 250 mm
180 mm and 230 mm
160 mm and 230 mm
EI
Emotional intelligence
Electromagnetic interference
Flexural Rigidity
Ending inventory
{"name":"Ruel book quiz", "url":"https://www.quiz-maker.com/QPREVIEW","txt":"Test your knowledge about the Ruel book and its associated rules! This quiz covers various important aspects and regulations that every enthusiast should know.Prepare for challenging questions that will help you gauge your understanding of key concepts.Multiple-choice questionsCovering topics like safety, design, and regulationsFun and engaging format","img":"https://cdn.poll-maker.com/104-5107563/img-ldau5kdrkqevmuounmkc88nk.jpg"}