E006 (AKA: FSCzech 18)

A visually appealing image depicting various engineering concepts such as gears, mechanical systems, and structural elements in a vibrant, dynamic layout, emphasizing automotive and mechanical engineering.

FSCzech 18: Engineering & Mechanics Quiz

Test your knowledge in engineering and mechanics with our challenging quiz! Designed for those passionate about automotive engineering, physics, and structural mechanics, you will face a series of 10 insightful questions that explore various concepts and applications.

Join us to discover how well you understand topics such as resonance frequencies, transmission systems, and material stress! Here’s what you'll find in our quiz:

Multiple choice questions covering diverse engineering topics.
Engaging and thought-provoking scenarios.
Instant feedback on your answers.

10 Questions2 MinutesCreated by TestingBee123

The turns ratio required to match a 75 Ω source to a 300 Ω load is?

2,3

What suspension type is displayed on the following picture?

Double Wishbone-Rear

McPherson Strut - Front

Five-link - Front

Double Wishbone - Front.

In a certain parallel resonant band-pass filter, the resonant frequency is 50 kHz. If the bandwidth is 2 kHz, the lower frequency...

Can not be determined.

Is 49 kHz.

Is 51 kHz.

Is 100 kHz.

What is the minimum diameter of a shutdown button in the cockpit?

20mm

25mm

24mm

30mm

Where is the maximum stress in the concrete located?

Point A - Outer end of the hole.

Point B - Half length of the hole.

Point C - Three quarter length of the hole.

Point D - End of the hole.

How many times will moment of inertia of a thin disk around y – axis increase, if we increase its radius and weight twice?

For three phase supply frequency of 60 Hz, the ripple frequency in full wave rectifier is...

360Hz

300Hz

150Hz

100Hz

What does a blue flag mean to the driver?

The driver may pick up speed again after a yellow flag was displayed.

The driver is clear to re-enter the track after using the slow lane to let a faster vehicle pass.

The driver must pull into the designated passing zone to be passed by a faster competitor. The driver must obey the track marshals signals at theend of the passing zone.

The driver must slow down and pull into the designated passing zone tobe passed by a faster competitor. The driver must obey the track marshals signals at the end of the passing zone.

What is the first natural frequency of the 2DOF system depicted if k1=k2=100N/mm and m1=m1=20kg?

12.6Hz.

0.4Hz.

70.7Hz.

11.3Hz.

What is depicted on the picture?

8 speed double clutch transmission for AWD.

7 speed double clutch transmission for 2WD.

Automatic transmission with torque converter.

7 speed double clutch transmission for AWD.

E006 (AKA: FSCzech 18)

FSCzech 18: Engineering & Mechanics Quiz

More Quizzes