EGRESS CDCS 2
EGRESS CDCS 2 Quiz
Welcome to the EGRESS CDCS 2 Quiz! This comprehensive quiz is designed to test your knowledge on critical concepts related to nuclear weapon systems and technical orders. Whether you're preparing for certification or simply looking to assess your understanding, this quiz is the perfect tool.
Key Features:
- 50 multiple-choice questions
- Focus on nuclear surety and maintenance practices
- Immediate feedback on your answers
Which is NOT a standard that is required to qualify for PRP certification?
Good social adjustment, emotional stability, personal intregrity, sound judgement and allegiance to the US
Physical competence, mental alertness, and technical proficiency commensurate with duty requirements
Positive attitude toward nuclear weapons duty, to include the purpose of PRP
Poor attitude and/or a lack of motivation
What concept is designed to ensure that a lone individual cannot perform an incorrect act or unauthorized procedure on a nuclear weapon, nuclear weapon system, or certified critical component?
Two-Person
No lone zone
Nuclear surety
Personnel reliability program
No lone zones are identified by
Applicable technical orders
The secretary of the AF
Each organization with a mission or function involving the nuclear mission
Each major command (MAJCOM) with a mission or function involving the nuclear mission
What type of technical orders list other technical orders
Index type TOs
TCTO
Methods and procedures TO (MPTO)
Operations and Mx TO
Which electronic system allows the viewing of technical orders
AF Technical order portal
Electric technical order database
Integrated technical order viewing system
Enhanced technical information management system
How often is complete information for all technical orders updated in the ETIMS
Daily
Weekly
Monthly
Real time
What type of TO is a complete list of all TO's for a specific weapons system or a piece of equipment
TCTO
List of applicable publications (LOAP)
Operations and Mx (O&M)
Consolidated security assistance TO index
Operations and Mx (O&M) TOs are written to provide
A complete listing of TOs for a specific weapon system or a piece of equipment
Organization and method procedures including group and work center requirements
Operation and Mx instructions including troubleshooting, calibration, and servicing
Procedures relating to scheduled equipment inspections and Mx management systems.
Which TO would contain detailed safety precautions for major component removval
Job Guide (JG)
General Vehicle (GV)
General System (GS)
Troubleshooting Manual (TM)
What type of TCTO is issued when unsafe conditions, if not corrected, could result in serious or fatal personal injury
Routine action
Urgent action
Immediate action
Emergency action
An immediate action TCTO must be distributed to all affected personnel within how many hours of receipt
2
4
10
24
What type of TCTO is issued when a deficiency could result in injury to personnel, damage to property, or unacceptable reductions in combat efficiency?
Routine action
Urgent action
Immediate action
Emergency action
What type of TCTO is issued when material, mechanical, operational or tactical deficiencies occur which could result in conditions that reduce the operational life of equipment
Routine action
Urgent action
Immediate action
Emergency action
Which methods and procedures TO (MPTO) explains IMDS
TO 00-20-1 Aerospace Equipment maintenance inspection, documentation, policies, and procedures
TO 00-20-2 Mx data documentation
TO 00-20-3 Mx processing of reparable property and the repair cycle asset control system
TO 00-20-9 forecasting replacement requirements for selected calendar and hourly time change items
Which methods and procedures TO (MPTO) provides step by step procedures for filling out aircraft forms
TO 00-20-1 Aerospace Equipment maintenance inspection, documentation, policies, and procedures
TO 00-20-2 Mx data documentation
TO 00-20-3 Mx processing of reparable property and the repair cycle asset control system
TO 00-20-9 forecasting replacement requirements for selected calendar and hourly time change items
What type of abbreviated TO provide guidance, including applicable safety warnings, cautions and notes, and specific accept or reject criteria for performing an inspection?
Checklists
Job guides
Inspection work cards
Inspection sequence charts
What type of abbreviated TOs most often are used by a phase dock chief to control the assignment of work during an inspection
Checklists
Job guides
Inspection work cards
Inspection sequence charts
What type of abbreviated TOs may be published when two or more differing specialty skills are involved in accomplishing a task?
Checklists
Job guides
Inspection work cards
Inspection sequence charts
Who coordinates a Mx assistance request through the MAJCOM to the appropriate weapon system program manager?
QA
Mx supervision
PS&D
The work center who discovers the discrepancy
After the request for assistance is answered, the reply is good
For a one time fix only
Every time the same discrepancy is found on an identical item
For any AC that has the same discrepancy on the same component
For all identical components with the same discrepancy belonging to the same base
Which priority would you use to submit a TO change that could cause damage to equipment or property?
Urgent
Routine
Immediate
Emergency
If a routine recommended TO change is approved, it is included in the TO
Immediately
Within 90 days
Within 180 days
Within 365 days
In order to receive a monetary award you must submit your recommendation TO change to the Airmen Powered by Innovation (API) program within how many days of the date of notification for recommended change approval?
90 working days
90 calendar days
180 working days
180 calendar days
If you submit an idea to the Airmen Powered by Innovation (API) program and it is approved with tangible savings and/or intangible benefits, how much money will you receive
$200
No less than $200 and no more than $10,000
No less than $500 and no more than $10,000
More than $10,000 and less than $100
Which publication gives you instructions on how to care for hand tools
TO 00-25-259 Standard Mx practices
AFI 21-123 AF repair enhancement program
TO 32-1-101 use and care of hand tools and measuring tools
AFI 21-101 AC and equipment Mx management
What type of screwdriver will you use most often on airframes?
Offset
Torq-set
Cross-tip
Cross-point
Which type of hammers are color coded in order to allow you to select the proper face hardness for a task?
Ball peen
Soft faced
Cross peen
Straight peen
When breaking the torque on a nut/bolt, which socket wrench accessory is the best to use?
Speed handle
Hinged handle
Ratchet handle
Torque wrench
Which type of punch is used to remove straight or tapered pins?
Prick
Center
Starting
Drive pin
Who is responsible for the tool and equipment management program?
Vice wing commander
Squadron Mx officer
Mx group commander
Mx squadron commander
Which method of tool accountability is not acceptable for deployed locations if a software database is not available
Chit system
AF Form 1297
MAJCOM form
Base specific form
If you have to leave a CTK unattended on the flight line, which is an appropriate method to secure it?
Locked with a key lock to an Aircraft
Locked to a secure and unmovable object
Locked with a cable to AGE equipment
Hidden in a low traffic location as long as it is on the secured flight line
If your TOs Mx procedure did not specify the torque value for a B nut you would refer to
The appropriate ground servicing technical manual
TO 32-1-101 use and care of hand tools and measuring tools
AFI 21-101 aircraft and equipment maintenance management
TO 00-20-1 aerospace equipment maintenance inspection, documentation, policies, and procedures
Which two types of torque wrenches are common in the egress sections
Stabilized and level
Standardized and static
Mechanical and digital
Industrious and dynamical
When torqueing a nut, the prevailing torque would be added to recommended torque if the prevailing torque is
One third or more than one third of the recommended torque value
Less than one third of the recommended torque value
One fourth or more than one fourth of the recommended torque value
Less than one fourth of the recommended torque value
What type of gauge typically has 22 blades
Rule gauge
Force gauge
Thickness gauge
Go/no go gauge
How will you know if your multimeter has a low battery
The multimeter emits an audible continuous tone
A picture of a battery symbol is displayed in the window
The omega symbol (ohms) is displayed in the window
The multimeter emits an audible intermittent tone
Which test does the TTU-415/E tester perform
Velocity sensor
Shell receptacle
Recovery sequencer
Emergency escape sequencing system (EESS)
What sequences the F-22 escape system, including the canopy thruster, inertia reel gas generator electronic explosive device, canopy rocket, seat catapult and the central integrated processor guillotine
Ejection sequencer
Recovery sequencer
Auto escape sequencer
Emergency escape sequencer
Which is a common cause of sling mishaps
Using edge padding
Properly balanced loads
Kinks in the ropes and/or cables
Hard hats obstructing the crane operators view
Seat sling inspections are documented on
AFTO form 244, industrial/support equipment record
AFTO form 781A, Mx discrepancy and work document
AF form 1670 Value property record
AF form 1800 operators inspection guide and trouble report
Which item is a component of a crane
Sling
Hoist
Guide lines
Pin bolt adapter
After performing a prior to use inspection on a B1 stand, what is the first step in raising the stand
Close the bypass valve by turning handle clockwise
Place the Mx platform in desired position and ensure that caster locks are engaged and wheel brakes are locked
If handrails were removed to perform Mx or gain access to ac, reinstall bolts or pins in the handrail to ensure accountability
Operate the hydraulic hand pump until the Mx platform attains the desired height, then manually rotate the barrel assembly into the proper position to allow fingers to lock
What must be engaged once a B-4A Mx stands platform has attained the desired height?
The release valve
The bypass valve
The pump handle
Two safety lock pins
Which controls the rate of descent when lowering the B-4A Mx stands platform?
Bypass valve
Valve spindle
Release valve
Pump handle
Which AGE power unit consists of a gas turbine engine, AC type alternating current (AC) generator, generator voltage regulator, rectification system for direct current (DC) power supply, engine fuel system, batteries and engine electrical system for starting and control functions and is used mostly on fighter and attack AC
B809A
A/M32A-60
A/M32A-86
5359C/90G20
Which generator set is replacing the "Hobart" because it has a diesel engine that runs cleaner and is safer for the environment?
B809A
A/M32A-60
A/M32A-86
5359C/90G20
Power units should NEVER be positioned within which distance of an AC fuel system vent?
5 feet
10 feet
15 feet
20 feet
Which floodlight set includes two receptacles for 240 volt and three receptacles for 120 volt
FL-1D
B809A
NF-2D
EPU-5/E
Which statement about floodlight sets is true?
You cannot use them to power other equipment
Never climb into a floodlights compartment to keep warm
It is safe to climb into a floodlights compartment to keep warm
Light carts are similar o any other appliance and you do not need to pre inspect them
{"name":"EGRESS CDCS 2", "url":"https://www.quiz-maker.com/QPREVIEW","txt":"Welcome to the EGRESS CDCS 2 Quiz! This comprehensive quiz is designed to test your knowledge on critical concepts related to nuclear weapon systems and technical orders. Whether you're preparing for certification or simply looking to assess your understanding, this quiz is the perfect tool.Key Features:50 multiple-choice questionsFocus on nuclear surety and maintenance practicesImmediate feedback on your answers","img":"https:/images/course8.png"}
More Quizzes
Safeguards Inspection and Verification
15816
M7
60300
Create Documentation Support
1050
CDC Quiz 6
10522
Maintaining your assigned protective mask.
5216
Thermo Fisher Scientific Petaluma Quality Trivia
10537
Quality Workstation - 20 Questions
20100
Technical Operations Proficiency Quiz
321619
Medonic M Series Competency Assesssment
10511
QA - Session 1
8419
Product Audit Management Quiz - 3 (Creator - Protap Roy)
1050
May 2020 Training Standards
301524