Final 3

A vibrant digital illustration depicting various networking concepts such as routers, IP addresses, VPN connections, and a quiz environment, with a background of connecting lines and nodes.

Networking Knowledge Quiz

Test your knowledge on networking concepts with our engaging quiz designed for students and professionals alike. Challenge yourself with a variety of questions covering IP address management, QoS, VPN types, and more!

Topics include:

IPSec Protocols
Networking Devices
Access Control Lists
Virtualization

10 Questions2 MinutesCreated by ConfiguringRouter42

If an outside host does not have the Cisco AnyConnect client preinstalled, how would the host gain access to the client image?

The Cisco AnyConnect client is installed by default on most major operating systems.

The host initiates a clientless VPN connection using a compliant web browser to download the client.

The host initiates a clientless connection to a TFTP server to download the client

The host initiates a clientless connection to an FTP server to download the client.

Refer to the exhibit. Routers R1 and R2 are connected via a serial link. One router is configured as the NTP master, and the other is an NTP client. Which two pieces of information can be obtained from the partial output of the show ntp associations detail command on R2? (Choose two.)

Both routers are configured to use NTPv2.

Router R1 is the master, and R2 is the client

The IP address of R2 is 192 168.1.2.

Router R2 is the master, and R1 is the client

The IP address of R1 is 192.168.1.2

Refer to the exhibit. The network administrator that has the IP address of 10.0.70.23/25 needs to have access to the corporate FTP server (10.0.54.5/28). The FTP server is also a web server that is accessible to all internal employees on networks within the 10.x.x.x address. No other traffic should be allowed to this server. Which extended ACL would be used to filter this traffic, and how would this ACL be applied? (Choose two.)

R1(config)# interface s0/0/0 R1(config-if)# ip access-group 105 outR2(config)# interface gi0/0 R2(config-if)# ip access-group 105 in

Access-list 105 permit tcp host 10.0.70.23 host 10.0.54.5 eq 20 access-list 105 permit tcp host 10.0.70.23 host 10.0.54.5 eq 21 access-list 105 permit tcp 10.0.0.0 0.255.255.255 host 10.0.54.5 eq www access-list 105 deny ip any host 10.0.54.5 access-list 105 permit ip any any

Access-list 105 permit ip host 10.0.70.23 host 10.0.54.5 access-list 105 permit tcp any host 10.0.54.5 eq www access-list 105 permit ip any any

R1(config)# interface gi0/0 R1(config-if)# ip access-group 105 out

Access-list 105 permit tcp host 10.0.54.5 any eq www access-list 105 permit tcp host 10.0.70.23 host 10.0.54.5 eq 20 access-list 105 permit tcp host 10.0.70.23 host 10.0.54.5 eq 21

Refer to the exhibit. If the network administrator created a standard ACL that allows only devices that connect to the R2 G0/0 network access to the devices on the R1 G0/1 interface, how should the ACL be applied?

Inbound on the R2 G0/0 interface

Outbound on the R1 G0/1 interface

Inbound on the R1 G0/1 interface

Outbound on the R2 S0/0/1 interface

Final 3

Networking Knowledge Quiz

More Quizzes