Formula bharat practic quiz
Formula Bharat Practice Quiz
Test your knowledge on the vital aspects of automotive engineering and safety regulations with our Formula Bharat Practice Quiz. Designed for students and enthusiasts alike, this quiz covers essential topics related to vehicle design, safety standards, and performance metrics.
Brush up on your understanding and see how you stack up against others in the field!
- A range of challenging questions
- Multiple choice format for easy answering
- Perfect for aspiring engineers and racers
Complete the sentence : All aerodynamic devices in front of the front axle and extending further outboard than the most ____ of the front tire/wheel must be lower than 250 mm from the ground.
Outboard
Inboard
Non of the above
Both a and b
Which event does not have a minimum track with of 3 m
Autocross
Endurance
Skidpad
Non of the above
BOTS CAN BE USED AS
SERIES CONNECTION OF SWITCHES
Parallel CONNECTION OF SWITCHES
ROTATE TYPE SWITCH
Bots can be
Resetted by driver
Not resetted by driver
Both a and b
Non of these
In order to limit that power capability from the engine, a ___ circular restrictor must be placed in the intake system.
Single
Double
Triple
Both a and b can be used
Minimum firefighting agent capacity should be (in kg)
0.8
0.7
0.9
0.6
Minimum firefighting agent capacity should be
Aqueous Film Forming Foam (AFFF) fire extinguishers
Halon extinguishers and systems
Hand held fire extinguishers to be mounted on or in the vehicle
Three dry chemical/dry powder fire extinguishers
Fire Retardant – A material meeting one of the following standards:
UL94 V-0 f
FAR 25.853(a)(1)(i)
Both of these
Non of these
In acceleration event
3.5 points are awarded to every team that finishes at least one run without a DNF or DQ
TTeam is the team‟s best run time including penalties
The foremost part of the vehicle is staged 0.30 m behind the starting line. Vehicles will accelerate from a standing start.
Each team has up to _____ runs, driven by ____ drivers with two runs each in autocross.
4,1
4,2
2,2
2,1
The steering wheel must be no _____________ of the front hoop
Less than 250mm rearward
More than 500 mm forward
More than 250mm rearward
Less than 500mm rearward
In laminate testing - The distance between the two test panel supports must be at least
300mm
400mm
350mm
200mm
All edges of bodywork that could come into contact with a pedestrian must have a minimum radius of
1mm
38mm
25mm
Choose the incorrect option
Red flag- The driver must come to an immediate safe and controlled stop on the course and must follow track marshals direction
Yellow flag- The track is slippery or something is on the racing surface that should not be there
Red and Yellow striped flag- The driver must be prepared for evasive maneuvers to avoid unwanted objects on the race track.
Which of these is incorrect
Standard wheel lug bolts can be made of steel
Teams using modified lug bolts, studs or custom designs will be required to provide proof that good engineering practices have been followed.
Aluminum wheel nuts should be used
{"name":"Formula bharat practic quiz", "url":"https://www.quiz-maker.com/QPREVIEW","txt":"Test your knowledge on the vital aspects of automotive engineering and safety regulations with our Formula Bharat Practice Quiz. Designed for students and enthusiasts alike, this quiz covers essential topics related to vehicle design, safety standards, and performance metrics.Brush up on your understanding and see how you stack up against others in the field!A range of challenging questionsMultiple choice format for easy answeringPerfect for aspiring engineers and racers","img":"https:/images/course6.png"}
More Quizzes
FS East 2020
1586
Steering #3 (steering mechanism & gears)
10510
Rulebook Test
15814
T section quiz 5
10531
Formula Student Quiz
10512
Quiz Czech 2020-21 remix
10515
Engineering Fundamentals Quiz
1589
Machine Design Challenge
10546
Online Safety
7454
Engineering Knowledge Challenge
1585
Automotive Knowledge Challenge
1477
24_01_FSG_MB
10533