Aerial Work Platform Operators - Test - 19 Questions | Take the Quiz

Autokiniton
Assocaiate Training Acknowledgement
(Aerial Work Platforms)

I agree to conform to the Aerial Work Platform, rules, procedures and policies of Autokiniton, as they now exist or as they may thereafter be modified, implemented, or eliminated, in whole or part.

This is to acknowledge that I have completed the Aerial Work Platform Training, rules, procedures and policies. I have also received the package for Aerial Work Platform, understood its contents and agree to abide by its provisions.

By typing your Full Name you are agreeing to this acknowledgement.

What shift are you on?

What department are you in?

1. It is the employer's responsibility to provide which of the following under this standard:

Training to the employees that will operate an aerial platform

Maintain an aerial platform free of defects

Insure preoperational inspections are done

None of the above

2. An operator's permit must be renewed every:

1 year

2 years

3 years

None of the above

3. The minimum safe operating distance from energized power lines operating at less than 50kv is:

2 ft.

6ft.

10ft.

None of the above

4. Modifications made to an aerial work platform must be certified in writing by the:

Employer

Person making the modifications

The aerial platform manufacturer

The aerial platform trainer

5. The rated load capacity may be exceeded only:

For the addition weight of tools

When additional personnel is needed for the task

Never

when additional counterweights are used to offset the added weight

6. Directional controls shall do or have which of the following:

Return to neutral when released

Be protected against inadvertent operation

a red emergency stop control on the panel

be clearly marked as to intended function

7. An employee is only allowed to exit an elevated work platform when:

The area is hazardous or inaccessible to reach

Only with the knowledge and consent of the employer

When using fall protection

All of the above

8. The operator shall report defects to their supervisor.

True

False

9. The operator shall make themselves familiar with the aerial platform manufacturer's manual for operating and the safety rules.

True

False

10. A fall arrest harness shall only be used for fall protection on a platform without railing or a bucket.

True

False

11. The lifting and outrigger system of an aerial work platform shall be equipped with a means. such as but not limited to, a pilot operated check valve to ensure that the system will not permit the work platform to drop in a free fall in event of a power or hydraulic line failure.

True

False

12. All aerial work platforms shall have constant pressure emergency ground level controls.

True

False

13. Any aerial work platforms found not to be in safe operating conditions shall be repaired within 1 work week.

True

False

14. Only employees, their tools, and necessary materials shall be on or in the platform.

True

False

15. The use of railings, planks, ladders, or any other devices on the platform for achieving additional height is prohibited.

True

False

16. An employer shall not allow employees to exit an elevated aerial work platform, except where elevated work areas are inaccessible or hazardous to reach.

True

False

17. Each aerial work platform shall be inspected maintained, repaired and kept in proper working condition in accordance with manufacturers or owner's operating or maintenance and repair manual or manuals.

True

False

18. An aerial work platform shall be inspected only annually.

True

False

Match the following definitions:

Qualified person

Means a person who is approved and assigned to perform specific types of duties by the employer and who is qualified to perform those duties becauy

Authorized person

Means a person who possesses a recognized degree, certificate, professional standing or skill and who, by knowledge, training and experience, has demonstrated the ability to deal with problems relating to the subject matter, the work, or the project