Network Design

As a routing protocol, what is RIP short for:

Consider the network 121.0.0.0/8. If we divided this huge network space into 1024 equal sized subnets, how many host IP address would each subnet be capa

Waiting for a complete picture of the network is know as:

Rip v2 allows administratos to subnet the 192.168.0.0/24 network.

What is the first field in an IP V4 header?

What would the standard class full subnet mask before the IP address 120.0.0.25?

What is the purpose of an LSA?

Which of the following is NOT an advantage of using OSPF?

How many route entries can a RIP message contain?

OSPF is designed to route packets within a single _________.

Given the address 182.44.82.16, with the mask of 255.255.255.192, what subnet would this address belong to?

Given the address 172.16.2.160, with the mask of 255.255.255.192, what subnet would this address belong to?

Static Routing Tables are changed by:

If we had a database with 100 records and each record contained 120 digits (0-9), how much information (in bits) would be transmitted if we were to transmit that database from Vancouver to Halifax?

Given a record that consists of ten 7 bit ascii characters in a database that contains 200 records, How large is each record (in Bits)?

From the OSI perspective, EXACTLY what is the data that is carried in an Ethernet Frame?

STP is a____________-prevention protocol

Only data that needs to be sent across the bridge to the adjacent network is forwarded by the bridge.

Which of the following best describes what the MAC layer is responsible for?

What is the minimum frame size for an 802.3 frame ?

When a receiving LLC process receives information from the MAC layer, it will most likely ?

The Primary Reason for a Jam Signal in Ethernet is to:

All bridges on the network share information to form a common bridging table.

Which layer of the OSI model defines how to fragment a packet into smaller packets to accommodate different media?

A potential problem with bridging is the way bridges handle broadcasts.

How long must a PC wait (minimum) before it has determined that the cable is clear and can send?

What OSI layer is above the Transport on the OSI stack when a PC is receiving information?

Convert 120 into binary

Given a record that consists of ten 7 bit ascii characters in a database that contains 200 records, How large is each record (in Bits)?

The second field in the Ethernet frame (after the preamble) is the ____ and it is exactly ____ Bytes.

From the OSI perspective, EXACTLY what is the data that is carried in an Ethernet Frame?

When a bridge connects an Ethernet segment to another Ethernet segment, it is known as a _________ bridge

Explain how an administrator would ensure that a specific switch would be a root bridge.

What does BPDU stand for?

The third field in the Ethernet frame (after the preamble) is the ____ and it is exactly ______ Bytes.

The first field in the Ethernet frame after the preamble) is the ______ and it is exactly ______ Bytes.

Which OSI layer is responsible for compression and encryption?

How many possible unique codes (or states) are possible if a data communication system uses a single byte to encode data?

Which of the following are part of the bridging table? (Select all that apply)

Which layer of the OSI model arbitrates the dialogue between two communicating nodes, opening and closing that dialogue as necessary.

Which of the following would be included in the four characteristics of Data Communications?

A Bridge will store the bridging table in

Which layer of the OSI model segments data from the sending host's system and reassembles the data into a data stream on the receiving host's system?

What does IEEE 802.1d specify?

In a network with 30 bridges, how many root ports will there be?

Match the protocol data unit name with the corresponding 05I layer it belongs to. 1. Physical 2. Data Link 3. Network 4. Transport 5. Session 6. Presentation 7. Application (Bit, Frame, Packet, Segment)

MAC addressing in Ethernet uses an address length of 32 bits.