MOCK TEST
Engineering Quiz Mastery
Test your knowledge with our engaging engineering quiz designed for students and enthusiasts alike! Challenge yourself with a series of questions that cover various technical topics related to vehicle safety, materials, and specifications.
- 15 meticulously crafted questions
- Multiple choice format
- Instant scoring for immediate feedback
When power is removed ,an interval of_______ is allowed for the throttle to close to idle
1000ms
100ms
1ms
500ms
A team de-registered form the competition has two chance to apply for a place on the waiting list
False
True
Position of free-field microphone during noise test is________
100 cm from exhaust at 45 degree from horizontal plane
50 cm from exhaust at 45 degree from Horizontal plane
150 cm from exhaust at 45 degree from horizontal plane
180 cm from exhaust at 60 from horizontal position
Both roll hoops must have two 4.5 mm hole in a non-critical straight location and its surface at this point must be unobstructed for at least 180°
True
False
Which sensor is used in inertia switch?
Inertia switch sensor
Sensata Resettable Crash Sensor
Proximity Sensors
Position Sensors
Any crankcase or engine lubrication vent lines routed to the intake system must be connected downstream of the intake system restrictor.
True
False
The lap belts and anti-submarine belts use the same attachment point_________ of steel to be sheared if failed in tension at any point of the tab
Minimum cross sectional area of 9cm
Minimum cross sectional area of 90mm^2
Minimum cross secctional area of 90mm
None of these
What is the font size used for Vehicle number?
Atleast 150 mm
Atmost 150 mm
Less than 100 mm
More than 120 mm
Head Restraint , its attachments and its mountings must withstand a Force of _______ applied in the _________ direction at any point on its surface.
890 N , Rearward
850 N , Rearward
750 N , Forward
890 N , Forward
Which of the following is NOT a approved fire resistant material ?
Carbon X
Indura
Carbon foam
PBI
If composite materials are used in the primary structure or the tractive system accumulator container the SES must include
Material weight
Core weight
Cloth weights
Fiber Weight
The brake light must have________
Maximum shining surface of 15cm^2
Minimum shining surface of 15cm
Minimum shining surface of 15cm^2
Maximum shining surface of 15cm
Maximum file size of Design Specifications Sheet is ?
5 mb
7 mb
10 mb
1 mb
Vehicle to vehicle contact _________ depending on the nature of the incident.
120s up to DQ
60 s up to DNF
180s up to DQ
2 minutes up to DQ
Both A and D
CBOM
Costed Bill of Material
Cost Bill of Material
Cost Bill Over Material
Configurable Bill of Material
{"name":"MOCK TEST", "url":"https://www.quiz-maker.com/QPREVIEW","txt":"Test your knowledge with our engaging engineering quiz designed for students and enthusiasts alike! Challenge yourself with a series of questions that cover various technical topics related to vehicle safety, materials, and specifications.15 meticulously crafted questionsMultiple choice formatInstant scoring for immediate feedback","img":"https://cdn.poll-maker.com/104-5107189/img-tq6bnwidxarqnokbrrdru3n5.jpg"}