Lab 1

The amount of light entering a microscope may be adjusted by regulating the
Ocular
Diaphragm
Fine adjustment knob
Nose piece
If the ocular on a microscope is marked 10x and the low-power objective is marked 15x, the total magnification is
50x
25x
150x
1500x
The size of the light beam that passes through a microscope is regulated by the
Revolving nose piece
Course adjustment knob
Ocular
Condenser
Parfocal means that
The microscope employs only one lens
Final focusing can be done only with the fine adjustment knob
Changing objective by revolving the nose piece will still keep the specimen in focus
The highest magnification attainable is 1000x
Which of these is not true when changing magnification from low power to high power?
The specimen should be centered
Illumination should be decreased
The specimen should be in clear focus
The high-power objective should be in line with the body
The ability of a microscope to distinguish between two points as separate objectives is called
Parfocal focusing
Working distance
Diffraction
Resolution
The advantage of using immersion oil is that is has special _________ properties that permit the use of a powerful objective in a narrow field of vision.
Light-transmitting
The uniform circle of light that appears when one looks into the ocular is called the ____
Microscopic field
In determining the position (depth) of the colored threads, the ____________(red,green/blue,yellow) colored thread was in the middle
Red
Green
Yellow
Blue
If you move your slide to the right, the specimen moves to the__________ as you are viewing it microscopically.
Right
Left
After switching from lower power to high power,_______(more or less) of the specimen will be visible.
More
Less
Microscopic field size _______ (increases or decreases) with higher magnifications.
Increase
Decrease
The distance between the objectives and the slide is called the
Working distance
A photograph of a specimen taken through a compound light microscope is called a(n)
Photomicrograph
An ocular of 10x used with an objective of 40x gives a total magnification of
400x
Ocular
Platform on which slides is placed
Mounting for objectives
Regulates light intensity
Eyepiece
Stage
Platform on which slides is placed
Angular or curved part of the frame
Brings specimen into sharp focus
Lens below the stage opening
Arm
Mounting for objectives
Angular or curved part of the frame
Eyepiece
Regulates light intensity
Condenser
Regulates light intensity
Brings specimens into general focus
Lens below the stage opening
Brings specimen into sharp focus
Revolving nose piece
An objective usually marked 10x
Mounting for objectives
Angular or curved part of the frame
Platform on which slide is placed
Low-power objective
An objective usually marked 10x
An objective usually marked 40x, 43x, or 45x
Lens below stage opening
Regulates light intensity
Fine adjustment knob
Regulates light intensity
Brings specimen into general focus
Brings specimen into sharp focus
Eyepiece
Diaphragm
Brings specimen into general focus
Platform on which slide is placed
Regulates light intensity
Lens below stage opening
Course adjustment knob
Brings specimen into general focus
Mounting for objectives
Brings specimen into sharp focus
Lens below the stage opening
High-power objective
An objective usually marked 10x
An objective usually marked 40x, 43x, or 45x
Angular or curved part of frame
Lens below stage opening
{"name":"Lab 1", "url":"https://www.quiz-maker.com/QPREVIEW","txt":"The amount of light entering a microscope may be adjusted by regulating the, If the ocular on a microscope is marked 10x and the low-power objective is marked 15x, the total magnification is, The size of the light beam that passes through a microscope is regulated by the","img":"https://www.quiz-maker.com/3012/images/ogquiz.png"}
Powered by: Quiz Maker