EMC TestQuiz 18.01

An illustration of an engineering student working on various mechanical components and calculations, with a background of technical diagrams and a racing car.

eMC Engineering Challenge Quiz

Test your engineering knowledge with our comprehensive eMC TestQuiz! This quiz covers various topics including physics, materials, and electrical safety.

  • 11 challenging questions
  • Multiple choice and checkbox formats
  • Instant feedback on your answers
11 Questions3 MinutesCreated by CalculatingFalcon42
How many points do you receive for “Content and Completeness of the BOM” if 3 assemblies and 5 materials are missing?
10
11
10.5
9
6
25
20
0
-3
-5
-10
Imagine you’re running AutoX in FSA 2016. You need to limit your speed because of the following corner. What is the fastest can go at the crest/edge and still land before the beginning of the braking zone? Round to one decimal and answer in km/h! + h = 0.25 m + s = 5 m + g = 9.81 m/s^2 + Consider the car a point mass; Ignore aerodynamic effects.
79.7 km/h
25.2 m/s
70.0 km/h
81.3 km/h
22.5 m/s
Your battery off-load voltage is 9.2 V. When the current flow is 100 mA the battery voltage decreases to 8.6 V. How much is the internal resistance?
6 Ohm
86 Ohm
92 Ohm
0.6 Ohm
9.2 Ohm
4 Ohm
8.6 Ohm
How much Performance is needed to speed up the moving vehicle with the following parameters on a horizontal line? (m = 2000kg, A = 2.2 m^2, λ = 1.15, a = 0.7 m/s^2, v = 80 m/s, cw = 0.22, fr = 0,015, ρ = 1.25 kg/m^3)
307 224 J/s
377 856 W
283 680 VA
0.3 MW
80 kg*m^2/s^3
294 kW
400 000 W
The illustrated lifting device consists of two bars and a pulley, over which a rope is guided without friction. With the device, a box with the weight G is to be raised. Given: G = 1kN, α = 30 °, β = 60 ° What are the forces in the bars?
S1= 3732.05 N S2= -3732.05 N
S1= 1732.05 N S2= -2000 N
S1= 1732.05 N S2= -1732.05 N
S1= 3732.05 N S2= -1732.05 N
S1= 2000 N S2= -3732.05 N
What responsibility does an ESO not have during the FSG event if he is the only ESO on the team?
He is responsible for registering a deputy for the time periods in which he is designated to drive the competition vehicle.
He is responsible for all electrical work carried out on the vehicle during the event.
He is responsible for declaring the vehicle electrically safe.
He is responsible for being contactable by phone during the engineering design event.
He is responsible for being contactable by phone during the time periods in which the competition vehicle is designated to drive.
What kind of is logic circuit this?
Synchronous Counter
Asynchronous Counter
Flip Flop machine
Traffic light circuit
CATIA’s heart
Calculate r0 Tire dimension (300/35 R19 86T)
27.27''
13.63''
0.721 m
26.26''
700.1 mm
70.2 cm
What is the minimum distance for L in the pictured situation? (L starts at the highest point of shoulders and ends at the harness attachment point)
274.75 mm
Between 180 and 230 mm
292.38 mm
287.34 mm
Calculate the spring force of a classic linear cylindric coil spring Gravity g = 9,81 m/s² Shear modulus G = 81500 N/mm² Young’s Modulus E = 206000 N/mm² range s = 10 mm mean coil diameter D = 80 mm wire diameter d = 4 mm number of resilient windings n = 7
7.28 N
5.7 kN
1000 N
1.34 N
43.71 N
0.0381 kN
Which force the tube will withstand? Round-up to two decimals.
L= pi/8 m, E= 70 GPa, tube dimensions: Ø 25x1.5
8596.83 N
4708.58 N
85.98 N
3375.97 N
8 kN
4646.46 N
{"name":"EMC TestQuiz 18.01", "url":"https://www.quiz-maker.com/QPREVIEW","txt":"Test your engineering knowledge with our comprehensive eMC TestQuiz! This quiz covers various topics including physics, materials, and electrical safety.11 challenging questionsMultiple choice and checkbox formatsInstant feedback on your answers","img":"https:/images/course4.png"}
Powered by: Quiz Maker