Dresden Quiz #1

A detailed illustration of an electric vehicle in a racing environment, showcasing intricate engineering and safety features, with a strong focus on dynamism and performance.

Dresden Quiz Challenge

Test your knowledge about the Dresden engineering standards and racing regulations with our engaging quiz! This quiz covers a variety of topics, including vehicle dynamics, safety standards, and performance metrics.

  • 15 questions to challenge your understanding
  • Multiple-choice format for easy engagement
  • See how you rank against other participants
14 Questions4 MinutesCreated by EngineeringEagle42
All drivers have to wear shoes certified to...
SFI 3.3 or FIA 8856-2000
SFI 33.33 or FIA 8856-2012
SFI 3.3 or FIA 8586-2000
SFI 2.2 or FIA 8856-2000
Which is the exact resistance value for the IMD for a vehicle with a system voltage of 458V?
45.8 kOhm
343.5 kOhm
114.5 kOhm
229 kOhm
A steady DC current is flowing through a coil with an inductance of 248mH. The stored energy in the magnetic field is 431J. By how much does the current have to be increased, if the stored energy should be increased by 300J?
76.78A
17.820A
17.821A
17.822A
17.823A
17.824A
17.825A
76.76A
76.77A
76.79A
9.769A
9.768A
9.767A
9.766A
Which minimum spacing through air must be maintained between tractive system and GLV parts that are in the same enclosure, if the potential between those parts is above 200VDC?
9.5 mm (0.37 inch)
20 mm (0.75 inch)
6.4 mm (0.25 inch)
30 mm (1.2 inch)
Imagine the following key data of your 4WD EV car: torque per wheel – 350 Nm | tires` radius – 228 mm | power limitation – 80 kW At which theoretical velocity the car has reached the power limitation?
12 m/s
13 m/s
46 km/h
47 km/h
Which material is suited as a firewall for a cooling hose running through the monocoque under the driver`s legs?
Aluminum with holes smaller than 8 mm diameter
Aluminum grid with a minimal spacing of 2 mm between the strings
Aluminum without any holes
The material does not matter, if it is sealed
There is no firewall needed
The Design Spec Sheet is an official document of which category?
D
C
B
A
Which statement is wrong?
The front hoop must have an angle between 70° and 110° relative to the floor
You can upload your SES in an unfinished state (which will then fail) to gain time
The MHB must be on the side the Mainhoop leans to
The 95th percentile male is 183,5cm tall
Is it allowed to have a 2,8mm wide gap in the floor of your car?
Yes
No
What does the scale show?
100N
200N
0N
150N
What cornering forces would be represented if the tilt table was not tilted to 60°, but to 70°?
2,74g
2,76g
2,75g
1,93g
1,92g
1,94g
A Car with a mass of 2000kg, which is travelling at 180km/h comes to a full stop in 200m. How big is the breaking power?
623kW
622kW
624kW
625kW
626kW
628kW
Which of the following answers is wrong?
Every team that finishes at least one Skidpad run without DNF get 3,5 points
Every team that finishes at least one Acceleration run without DNF get 3,5 points
Every team that finishes at least one Endurance run without DNF get 25 points
Every team that finishes at least one Autocross run without DNF get 3,5 points
 
{"name":"Dresden Quiz #1", "url":"https://www.quiz-maker.com/QPREVIEW","txt":"Test your knowledge about the Dresden engineering standards and racing regulations with our engaging quiz! This quiz covers a variety of topics, including vehicle dynamics, safety standards, and performance metrics.15 questions to challenge your understandingMultiple-choice format for easy engagementSee how you rank against other participants","img":"https:/images/course7.png"}
Powered by: Quiz Maker