Rulebook FB24
Rulebook FB24 Quiz
Test your knowledge of the Rulebook FB24 with our engaging quiz! This quiz covers key aspects of the rules and specifications related to vehicle design and operation, providing a perfect challenge for enthusiasts and participants alike.
- Multiple choice questions
- Understand key regulations
- Enhance your knowledge and skills
For violation of the rules with advantage for the team, the team receives a penalty for Autocross __
1s
0.2s
5s
0.5s
The vehicle must be equipped with fully operational front and rear suspension systems including shock absorbers and a usable wheel travel of at least 50 mm and a maximum jounce of 25 mm with driver seated.
True
False
BOTS must be installed so that in the event of a failure in ______ of the brake circuits, the brake pedal over travel will result in the shutdown circuit being opened.
At least two
At least one
At most two
At most one
The rubrics for each round will be made available on- site.
False
True
Any aerodynamic device must be able to withstand a force of 200 N distributed over a minimum surface of 225 cm2 and not deflect more than 10 mm in the load carrying direction.
False
True
Corrected files must be uploaded within ___ hours of receiving a reviewer notice.
168
170
178
180
If a vehicle is not able to start the run, within _______ after receiving a green flag or go-signal, the vehicle is DQ for that run.
15s
30s
60s
2min
The fuel system must be designed such that the spillage during refueling can contact __
Exhaust system
Ignition system
Both a and b
None of the above
The scoring of the cost and manufacturing finalists will vary from ____ points.
100 to 84
100 to 85
100 to 86
100 to 87
After technical inspection, the only modifications permitted to the vehicle are:
Adjustment of tire pressure
Adjustment of the brake bias
Both a and b
None of the above
The front hoop bracing attaches on each side of the front hoop as well as the structure forward of the driver’s feet. A minimum of two tubes without any bends must be straight on a line in the side view of the frame and must have a maximum distance of 100 mm between each other at the front hoop.
True
False
To detect hard braking, a brake system pressure sensor must be used. The threshold must be chosen such that there are no locked wheels and the brake pressure is _____ bar.
More than or equal to 10
Less than or equal to 10
Less than or equal to 30
More than or equal to 30
The driver and anyone standing outside the vehicle must be shielded from any hydraulic pumps and lines with line pressures of 2100 kPa or higher. The shields must be steel or aluminum with a minimum thickness of 1 mm. Brake lines are not considered as high pressure hydraulic lines.
True
False
On both sides of the vehicle, the devices pickup points must be indicated by ____ triangles.
Blue
Orange
Black
Yellow
{"name":"Rulebook FB24", "url":"https://www.quiz-maker.com/QPREVIEW","txt":"Test your knowledge of the Rulebook FB24 with our engaging quiz! This quiz covers key aspects of the rules and specifications related to vehicle design and operation, providing a perfect challenge for enthusiasts and participants alike.Multiple choice questionsUnderstand key regulationsEnhance your knowledge and skills","img":"https:/images/course1.png"}