QUIZZ BISS
Vehicle Safety Regulations Quiz
Test your knowledge on essential vehicle safety regulations with our comprehensive quiz! Whether you are preparing for competition or simply want to deepen your understanding of automotive safety standards, this quiz covers crucial topics and guidelines.
Key Features:
- Multiple choice questions
- Instant feedback on your answers
- Great for enthusiasts, students, and professionals alike
The bodywork in front of the front wheels must have a radius of at least___ extending at least 45° relative to the __ direction, along the top, sides and bottom of all affected edges
38mm, backward
38mm, forward
25mm, forward
The vehicle must be capable of starting and restarting ___ at all times.
With external assistance/ batteries
Without external assistance/batteries.
None of these
From the drivers shoulder Rearwards to the mounting point for structural guide the shoulder harness must be between___ above the horizontal
20°
30°
45°
10°
Th exhaust outlet must not extend___ behind the Centerline of the rear axle
600mm
300mm
450mm
500mm
Fire resistant suit must be
Single layered
Two piece
Two layered
Single piece
Select the incorrect option regarding camera mounts
Helmet mounted cameras are prohibited
All camera installations must be approved at technical inspection
The body of any camera or recording unit must be secured at a minimum of two points on different sides of the camera body.
Camera mounts should be able to stand a force of 300N
A missing pitch deck
Will be penalised with 40 points
Will forfeit the team’s participation in the prelims
Will be penalised with 49 points
None of these
The steering wheel must be no more than _______ of the front hoop.
500mm forward
100mm rearward
250 mm rearward
250mm forward
Crankcase breathers that pass through the oil catch tank(s) to exhaust systems, or vacuum devices that connect directly to the exhaust system
May be used
Are allowed
Are prohibited
The ________restrictor diameters for gasoline fueled vehicles is ___
Minimum, 20mm
Maximum, 25mm
Minimum, 15mm
Maximum, 20mm
The fuel tank by design, ____ variable capacity
Must not have
Must have
should not have
The drain hole need to be easily accessible and ____required disassembly of the tank
Must not
Should not
Should
Must
Line must be rigidly connected every ___mm By mechanical fastener to structural engineer components.
150
100
120
125
Fuel line between fuel tank and fuel rail and return line must have
Polymer braided hoses with crimped-on or reusable, threaded fitting
Metal braided hoses with crimped-on or reusable, threaded fitting
metal braided hoses with crimped-on or non reusable, threaded fitting
Polymer braided hoses with crimped-on or non reusable, threaded fitting
Which is correct
The center of Inertia switch must not be mounted lower than the vertical distance of the template‟s middle circle center to the ground surface multiplied by 0.8.
The center of any master switch must not be mounted lower than the vertical distance of the template‟s middle circle center to the lowest chassis point multiplied by 0.8
The center of any master switch must not be mounted lower than the vertical distance of the template‟s middle circle center to the ground surface multiplied by 0.8.
{"name":"QUIZZ BISS", "url":"https://www.quiz-maker.com/QPREVIEW","txt":"Test your knowledge on essential vehicle safety regulations with our comprehensive quiz! Whether you are preparing for competition or simply want to deepen your understanding of automotive safety standards, this quiz covers crucial topics and guidelines.Key Features:Multiple choice questionsInstant feedback on your answersGreat for enthusiasts, students, and professionals alike","img":"https:/images/course3.png"}