11+ GL English Set-5

Read the following passage and answer the questions that follow:

Shoes Step Forward

Shoes—we wear them nearly every day. We walk, run, jump, climb, and stand in them for hours on end. Yet we hardly think about them because they are such an ordinary part of our daily lives. Shoes were not always an important part of people’s wardrobes. The ancient Greeks, Egyptians, and Persians made and wore sandals, but actually went barefoot most of the time. These people lived in regions where the weather was temperate, and shoes were not needed to keep their feet warm. Archaeologists have found shoes in the ruins of these civilizations, but they seem to have been worn mainly by royalty, who could afford to employ tailors and shoemakers.

Shoes in Early Civilizations

As shoes became more common in ancient Egypt, the first ones were simple sandals created mainly to protect the soles of the feet from rough surfaces. The easiest way to make shoes in these ancient times was to use materials that were readily available, including tree bark, leaves, and grasses. In ancient Egypt, sandals were made of rushes, which are grassy plants with hollow stalks. Rushes are the same plants used today to make chair bottoms, mats, and baskets.
Among the ancient Greeks, sandals were woven of similar plant materials, but the Greeks also varied the process by tying small pieces of wood together with dried grass. In later years, they made sandals with leather from the hides of animals. The first Greek shoes were purely functional, but over time most were dyed and decorated to make fashion statements. Women began to wear soft, enclosed leather shoes, and these grew increasingly fancy in the later years of the Greek civilization.
The Romans wore sandals much like the Greeks did, but used more pieces of leather to make them. Some Roman sandals had straps that wrapped around the ankles. Shoemakers often dyed these sandals in bright colors that represented the different jobs held by the people wearing them. The patricians, or privileged classes, wore red sandals with moon-shaped ornaments on the back. Senators wore brown shoes with four black leather straps wound around the lower leg. Consuls, or legal officers, wore white shoes, and soldiers wore heavy leather sandals that were more like boots—but with bare toes!
Meanwhile, people who lived in cold northern climates were making their shoes from the hides of furry animals, such as polar bears and yaks. The soles and tops of these shoes were made from pieces of soft leather sewn together. This type of shoe—whether or not it used fur—was called a moccasin. Some Native American groups made and wore moccasins for thousands of years. Some moccasins were plain, and others were adorned with beadwork.

The Shoemaking Process

As the centuries passed, the primary material for shoes continued to be leather, and the process of making shoes did not change quickly. A wood and metal framework called a “last” was wrapped with pieces of leather that were then sewn together. As late as the mid-1800s, lasts were straight on both sides; this meant that there was no difference in shape between left and right shoes. It also meant that shoes were uncomfortable and that breaking them in was not easy. The lasts were made in different sizes, but for a long time only two widths were available—thin and stout.

For centuries, shoes were sewn by hand, just as they had been by the ancient Egyptians. Machines to assist shoemakers were not used until the rolling machine was invented in 1845. This device was used to pound pieces of leather into thin strips. About the same time, Elias Howe invented the sewing machine, and pieces of shoe leather could now be sewn together more quickly. Another inventor, Lyman Reed Blake, created a machine for sewing the soles of shoes to the upper parts. Because shoes could be made faster and more cheaply, people who had never owned shoes before could now afford to buy and wear them.

New Trends, Materials, and Designs

In Europe and North America during the seventeenth century, most people wore boots because they were practical. Even in many large cities, dirt roads were common, and people had to walk along muddy pathways and across streams. By the eighteenth century, however, more city streets were paved with cobblestones, and it was easier to keep shoes clean. Shoes became more decorative, and fancy buckles of gold and silver were often used. Most shoes worn in the United States throughout the nineteenth century were patterned after European styles.
The major change in shoes over the last century has been the use of materials other than leather. Humphrey O’Sullivan invented the first rubber heel for shoes in 1898. Rubber heels were popular because they lasted much longer than heels made of leather. The use of rubber soles came next. The first rubber soled shoes were called plimsolls, and they were manufactured in the United States in the late 1800s.
The first American shoes made without leather were invented in 1917. The upper material was made of a flexible canvas. Those were the original “sneakers,” a word that was used because the rubber sole made the shoe very quiet, unlike most leather shoes, which often squeaked when people walked.
Many people today choose athletic shoes for casual wear, but not until the late 1970s were shoes designed with amateur athletes in mind. Shoes made of rubber and canvas was worn by tennis, volleyball, and basketball players. By the 1980s, companies began to design athletic shoes for specific sports, helping athletes perform better while protecting their feet and providing comfort.
Shoes have come a long way since the ancient Egyptians created their first sandals. Many more types of materials are used, and shoes have never been more comfortable or supportive for feet. Even so, it is interesting that the basic sandal, crafted by people more than four thousand years ago, still has many similarities to shoes we wear today.

Read the following passage and answer the questions that follow:

Shoes Step Forward

Shoes—we wear them nearly every day. We walk, run, jump, climb, and stand in them for hours on end. Yet we hardly think about them because they are such an ordinary part of our daily lives. Shoes were not always an important part of people’s wardrobes. The ancient Greeks, Egyptians, and Persians made and wore sandals, but actually went barefoot most of the time. These people lived in regions where the weather was temperate, and shoes were not needed to keep their feet warm. Archaeologists have found shoes in the ruins of these civilizations, but they seem to have been worn mainly by royalty, who could afford to employ tailors and shoemakers.

Shoes in Early Civilizations

As shoes became more common in ancient Egypt, the first ones were simple sandals created mainly to protect the soles of the feet from rough surfaces. The easiest way to make shoes in these ancient times was to use materials that were readily available, including tree bark, leaves, and grasses. In ancient Egypt, sandals were made of rushes, which are grassy plants with hollow stalks. Rushes are the same plants used today to make chair bottoms, mats, and baskets.
Among the ancient Greeks, sandals were woven of similar plant materials, but the Greeks also varied the process by tying small pieces of wood together with dried grass. In later years, they made sandals with leather from the hides of animals. The first Greek shoes were purely functional, but over time most were dyed and decorated to make fashion statements. Women began to wear soft, enclosed leather shoes, and these grew increasingly fancy in the later years of the Greek civilization.
The Romans wore sandals much like the Greeks did, but used more pieces of leather to make them. Some Roman sandals had straps that wrapped around the ankles. Shoemakers often dyed these sandals in bright colors that represented the different jobs held by the people wearing them. The patricians, or privileged classes, wore red sandals with moon-shaped ornaments on the back. Senators wore brown shoes with four black leather straps wound around the lower leg. Consuls, or legal officers, wore white shoes, and soldiers wore heavy leather sandals that were more like boots—but with bare toes!
Meanwhile, people who lived in cold northern climates were making their shoes from the hides of furry animals, such as polar bears and yaks. The soles and tops of these shoes were made from pieces of soft leather sewn together. This type of shoe—whether or not it used fur—was called a moccasin. Some Native American groups made and wore moccasins for thousands of years. Some moccasins were plain, and others were adorned with beadwork.

The Shoemaking Process

As the centuries passed, the primary material for shoes continued to be leather, and the process of making shoes did not change quickly. A wood and metal framework called a “last” was wrapped with pieces of leather that were then sewn together. As late as the mid-1800s, lasts were straight on both sides; this meant that there was no difference in shape between left and right shoes. It also meant that shoes were uncomfortable and that breaking them in was not easy. The lasts were made in different sizes, but for a long time only two widths were available—thin and stout.

For centuries, shoes were sewn by hand, just as they had been by the ancient Egyptians. Machines to assist shoemakers were not used until the rolling machine was invented in 1845. This device was used to pound pieces of leather into thin strips. About the same time, Elias Howe invented the sewing machine, and pieces of shoe leather could now be sewn together more quickly. Another inventor, Lyman Reed Blake, created a machine for sewing the soles of shoes to the upper parts. Because shoes could be made faster and more cheaply, people who had never owned shoes before could now afford to buy and wear them.

New Trends, Materials, and Designs

In Europe and North America during the seventeenth century, most people wore boots because they were practical. Even in many large cities, dirt roads were common, and people had to walk along muddy pathways and across streams. By the eighteenth century, however, more city streets were paved with cobblestones, and it was easier to keep shoes clean. Shoes became more decorative, and fancy buckles of gold and silver were often used. Most shoes worn in the United States throughout the nineteenth century were patterned after European styles.
The major change in shoes over the last century has been the use of materials other than leather. Humphrey O’Sullivan invented the first rubber heel for shoes in 1898. Rubber heels were popular because they lasted much longer than heels made of leather. The use of rubber soles came next. The first rubber soled shoes were called plimsolls, and they were manufactured in the United States in the late 1800s.
The first American shoes made without leather were invented in 1917. The upper material was made of a flexible canvas. Those were the original “sneakers,” a word that was used because the rubber sole made the shoe very quiet, unlike most leather shoes, which often squeaked when people walked.
Many people today choose athletic shoes for casual wear, but not until the late 1970s were shoes designed with amateur athletes in mind. Shoes made of rubber and canvas was worn by tennis, volleyball, and basketball players. By the 1980s, companies began to design athletic shoes for specific sports, helping athletes perform better while protecting their feet and providing comfort.
Shoes have come a long way since the ancient Egyptians created their first sandals. Many more types of materials are used, and shoes have never been more comfortable or supportive for feet. Even so, it is interesting that the basic sandal, crafted by people more than four thousand years ago, still has many similarities to shoes we wear today.

Which event happened last?

Read the following passage and answer the questions that follow:

Shoes Step Forward

Shoes—we wear them nearly every day. We walk, run, jump, climb, and stand in them for hours on end. Yet we hardly think about them because they are such an ordinary part of our daily lives. Shoes were not always an important part of people’s wardrobes. The ancient Greeks, Egyptians, and Persians made and wore sandals, but actually went barefoot most of the time. These people lived in regions where the weather was temperate, and shoes were not needed to keep their feet warm. Archaeologists have found shoes in the ruins of these civilizations, but they seem to have been worn mainly by royalty, who could afford to employ tailors and shoemakers.

Shoes in Early Civilizations

As shoes became more common in ancient Egypt, the first ones were simple sandals created mainly to protect the soles of the feet from rough surfaces. The easiest way to make shoes in these ancient times was to use materials that were readily available, including tree bark, leaves, and grasses. In ancient Egypt, sandals were made of rushes, which are grassy plants with hollow stalks. Rushes are the same plants used today to make chair bottoms, mats, and baskets.
Among the ancient Greeks, sandals were woven of similar plant materials, but the Greeks also varied the process by tying small pieces of wood together with dried grass. In later years, they made sandals with leather from the hides of animals. The first Greek shoes were purely functional, but over time most were dyed and decorated to make fashion statements. Women began to wear soft, enclosed leather shoes, and these grew increasingly fancy in the later years of the Greek civilization.
The Romans wore sandals much like the Greeks did, but used more pieces of leather to make them. Some Roman sandals had straps that wrapped around the ankles. Shoemakers often dyed these sandals in bright colors that represented the different jobs held by the people wearing them. The patricians, or privileged classes, wore red sandals with moon-shaped ornaments on the back. Senators wore brown shoes with four black leather straps wound around the lower leg. Consuls, or legal officers, wore white shoes, and soldiers wore heavy leather sandals that were more like boots—but with bare toes!
Meanwhile, people who lived in cold northern climates were making their shoes from the hides of furry animals, such as polar bears and yaks. The soles and tops of these shoes were made from pieces of soft leather sewn together. This type of shoe—whether or not it used fur—was called a moccasin. Some Native American groups made and wore moccasins for thousands of years. Some moccasins were plain, and others were adorned with beadwork.

The Shoemaking Process

As the centuries passed, the primary material for shoes continued to be leather, and the process of making shoes did not change quickly. A wood and metal framework called a “last” was wrapped with pieces of leather that were then sewn together. As late as the mid-1800s, lasts were straight on both sides; this meant that there was no difference in shape between left and right shoes. It also meant that shoes were uncomfortable and that breaking them in was not easy. The lasts were made in different sizes, but for a long time only two widths were available—thin and stout.

For centuries, shoes were sewn by hand, just as they had been by the ancient Egyptians. Machines to assist shoemakers were not used until the rolling machine was invented in 1845. This device was used to pound pieces of leather into thin strips. About the same time, Elias Howe invented the sewing machine, and pieces of shoe leather could now be sewn together more quickly. Another inventor, Lyman Reed Blake, created a machine for sewing the soles of shoes to the upper parts. Because shoes could be made faster and more cheaply, people who had never owned shoes before could now afford to buy and wear them.

New Trends, Materials, and Designs

In Europe and North America during the seventeenth century, most people wore boots because they were practical. Even in many large cities, dirt roads were common, and people had to walk along muddy pathways and across streams. By the eighteenth century, however, more city streets were paved with cobblestones, and it was easier to keep shoes clean. Shoes became more decorative, and fancy buckles of gold and silver were often used. Most shoes worn in the United States throughout the nineteenth century were patterned after European styles.
The major change in shoes over the last century has been the use of materials other than leather. Humphrey O’Sullivan invented the first rubber heel for shoes in 1898. Rubber heels were popular because they lasted much longer than heels made of leather. The use of rubber soles came next. The first rubber soled shoes were called plimsolls, and they were manufactured in the United States in the late 1800s.
The first American shoes made without leather were invented in 1917. The upper material was made of a flexible canvas. Those were the original “sneakers,” a word that was used because the rubber sole made the shoe very quiet, unlike most leather shoes, which often squeaked when people walked.
Many people today choose athletic shoes for casual wear, but not until the late 1970s were shoes designed with amateur athletes in mind. Shoes made of rubber and canvas was worn by tennis, volleyball, and basketball players. By the 1980s, companies began to design athletic shoes for specific sports, helping athletes perform better while protecting their feet and providing comfort.
Shoes have come a long way since the ancient Egyptians created their first sandals. Many more types of materials are used, and shoes have never been more comfortable or supportive for feet. Even so, it is interesting that the basic sandal, crafted by people more than four thousand years ago, still has many similarities to shoes we wear today.

Which event happened first?

Read the following passage and answer the questions that follow:

Shoes Step Forward

Shoes—we wear them nearly every day. We walk, run, jump, climb, and stand in them for hours on end. Yet we hardly think about them because they are such an ordinary part of our daily lives. Shoes were not always an important part of people’s wardrobes. The ancient Greeks, Egyptians, and Persians made and wore sandals, but actually went barefoot most of the time. These people lived in regions where the weather was temperate, and shoes were not needed to keep their feet warm. Archaeologists have found shoes in the ruins of these civilizations, but they seem to have been worn mainly by royalty, who could afford to employ tailors and shoemakers.

Shoes in Early Civilizations

As shoes became more common in ancient Egypt, the first ones were simple sandals created mainly to protect the soles of the feet from rough surfaces. The easiest way to make shoes in these ancient times was to use materials that were readily available, including tree bark, leaves, and grasses. In ancient Egypt, sandals were made of rushes, which are grassy plants with hollow stalks. Rushes are the same plants used today to make chair bottoms, mats, and baskets.
Among the ancient Greeks, sandals were woven of similar plant materials, but the Greeks also varied the process by tying small pieces of wood together with dried grass. In later years, they made sandals with leather from the hides of animals. The first Greek shoes were purely functional, but over time most were dyed and decorated to make fashion statements. Women began to wear soft, enclosed leather shoes, and these grew increasingly fancy in the later years of the Greek civilization.
The Romans wore sandals much like the Greeks did, but used more pieces of leather to make them. Some Roman sandals had straps that wrapped around the ankles. Shoemakers often dyed these sandals in bright colors that represented the different jobs held by the people wearing them. The patricians, or privileged classes, wore red sandals with moon-shaped ornaments on the back. Senators wore brown shoes with four black leather straps wound around the lower leg. Consuls, or legal officers, wore white shoes, and soldiers wore heavy leather sandals that were more like boots—but with bare toes!
Meanwhile, people who lived in cold northern climates were making their shoes from the hides of furry animals, such as polar bears and yaks. The soles and tops of these shoes were made from pieces of soft leather sewn together. This type of shoe—whether or not it used fur—was called a moccasin. Some Native American groups made and wore moccasins for thousands of years. Some moccasins were plain, and others were adorned with beadwork.

The Shoemaking Process

As the centuries passed, the primary material for shoes continued to be leather, and the process of making shoes did not change quickly. A wood and metal framework called a “last” was wrapped with pieces of leather that were then sewn together. As late as the mid-1800s, lasts were straight on both sides; this meant that there was no difference in shape between left and right shoes. It also meant that shoes were uncomfortable and that breaking them in was not easy. The lasts were made in different sizes, but for a long time only two widths were available—thin and stout.

For centuries, shoes were sewn by hand, just as they had been by the ancient Egyptians. Machines to assist shoemakers were not used until the rolling machine was invented in 1845. This device was used to pound pieces of leather into thin strips. About the same time, Elias Howe invented the sewing machine, and pieces of shoe leather could now be sewn together more quickly. Another inventor, Lyman Reed Blake, created a machine for sewing the soles of shoes to the upper parts. Because shoes could be made faster and more cheaply, people who had never owned shoes before could now afford to buy and wear them.

New Trends, Materials, and Designs

In Europe and North America during the seventeenth century, most people wore boots because they were practical. Even in many large cities, dirt roads were common, and people had to walk along muddy pathways and across streams. By the eighteenth century, however, more city streets were paved with cobblestones, and it was easier to keep shoes clean. Shoes became more decorative, and fancy buckles of gold and silver were often used. Most shoes worn in the United States throughout the nineteenth century were patterned after European styles.
The major change in shoes over the last century has been the use of materials other than leather. Humphrey O’Sullivan invented the first rubber heel for shoes in 1898. Rubber heels were popular because they lasted much longer than heels made of leather. The use of rubber soles came next. The first rubber soled shoes were called plimsolls, and they were manufactured in the United States in the late 1800s.
The first American shoes made without leather were invented in 1917. The upper material was made of a flexible canvas. Those were the original “sneakers,” a word that was used because the rubber sole made the shoe very quiet, unlike most leather shoes, which often squeaked when people walked.
Many people today choose athletic shoes for casual wear, but not until the late 1970s were shoes designed with amateur athletes in mind. Shoes made of rubber and canvas was worn by tennis, volleyball, and basketball players. By the 1980s, companies began to design athletic shoes for specific sports, helping athletes perform better while protecting their feet and providing comfort.
Shoes have come a long way since the ancient Egyptians created their first sandals. Many more types of materials are used, and shoes have never been more comfortable or supportive for feet. Even so, it is interesting that the basic sandal, crafted by people more than four thousand years ago, still has many similarities to shoes we wear today.

Which civilization made shoes into a fashion statement?

Read the following passage and answer the questions that follow:

Shoes Step Forward

Shoes—we wear them nearly every day. We walk, run, jump, climb, and stand in them for hours on end. Yet we hardly think about them because they are such an ordinary part of our daily lives. Shoes were not always an important part of people’s wardrobes. The ancient Greeks, Egyptians, and Persians made and wore sandals, but actually went barefoot most of the time. These people lived in regions where the weather was temperate, and shoes were not needed to keep their feet warm. Archaeologists have found shoes in the ruins of these civilizations, but they seem to have been worn mainly by royalty, who could afford to employ tailors and shoemakers.

Shoes in Early Civilizations

As shoes became more common in ancient Egypt, the first ones were simple sandals created mainly to protect the soles of the feet from rough surfaces. The easiest way to make shoes in these ancient times was to use materials that were readily available, including tree bark, leaves, and grasses. In ancient Egypt, sandals were made of rushes, which are grassy plants with hollow stalks. Rushes are the same plants used today to make chair bottoms, mats, and baskets.
Among the ancient Greeks, sandals were woven of similar plant materials, but the Greeks also varied the process by tying small pieces of wood together with dried grass. In later years, they made sandals with leather from the hides of animals. The first Greek shoes were purely functional, but over time most were dyed and decorated to make fashion statements. Women began to wear soft, enclosed leather shoes, and these grew increasingly fancy in the later years of the Greek civilization.
The Romans wore sandals much like the Greeks did, but used more pieces of leather to make them. Some Roman sandals had straps that wrapped around the ankles. Shoemakers often dyed these sandals in bright colors that represented the different jobs held by the people wearing them. The patricians, or privileged classes, wore red sandals with moon-shaped ornaments on the back. Senators wore brown shoes with four black leather straps wound around the lower leg. Consuls, or legal officers, wore white shoes, and soldiers wore heavy leather sandals that were more like boots—but with bare toes!
Meanwhile, people who lived in cold northern climates were making their shoes from the hides of furry animals, such as polar bears and yaks. The soles and tops of these shoes were made from pieces of soft leather sewn together. This type of shoe—whether or not it used fur—was called a moccasin. Some Native American groups made and wore moccasins for thousands of years. Some moccasins were plain, and others were adorned with beadwork.

The Shoemaking Process

As the centuries passed, the primary material for shoes continued to be leather, and the process of making shoes did not change quickly. A wood and metal framework called a “last” was wrapped with pieces of leather that were then sewn together. As late as the mid-1800s, lasts were straight on both sides; this meant that there was no difference in shape between left and right shoes. It also meant that shoes were uncomfortable and that breaking them in was not easy. The lasts were made in different sizes, but for a long time only two widths were available—thin and stout.

For centuries, shoes were sewn by hand, just as they had been by the ancient Egyptians. Machines to assist shoemakers were not used until the rolling machine was invented in 1845. This device was used to pound pieces of leather into thin strips. About the same time, Elias Howe invented the sewing machine, and pieces of shoe leather could now be sewn together more quickly. Another inventor, Lyman Reed Blake, created a machine for sewing the soles of shoes to the upper parts. Because shoes could be made faster and more cheaply, people who had never owned shoes before could now afford to buy and wear them.

New Trends, Materials, and Designs

In Europe and North America during the seventeenth century, most people wore boots because they were practical. Even in many large cities, dirt roads were common, and people had to walk along muddy pathways and across streams. By the eighteenth century, however, more city streets were paved with cobblestones, and it was easier to keep shoes clean. Shoes became more decorative, and fancy buckles of gold and silver were often used. Most shoes worn in the United States throughout the nineteenth century were patterned after European styles.
The major change in shoes over the last century has been the use of materials other than leather. Humphrey O’Sullivan invented the first rubber heel for shoes in 1898. Rubber heels were popular because they lasted much longer than heels made of leather. The use of rubber soles came next. The first rubber soled shoes were called plimsolls, and they were manufactured in the United States in the late 1800s.
The first American shoes made without leather were invented in 1917. The upper material was made of a flexible canvas. Those were the original “sneakers,” a word that was used because the rubber sole made the shoe very quiet, unlike most leather shoes, which often squeaked when people walked.
Many people today choose athletic shoes for casual wear, but not until the late 1970s were shoes designed with amateur athletes in mind. Shoes made of rubber and canvas was worn by tennis, volleyball, and basketball players. By the 1980s, companies began to design athletic shoes for specific sports, helping athletes perform better while protecting their feet and providing comfort.
Shoes have come a long way since the ancient Egyptians created their first sandals. Many more types of materials are used, and shoes have never been more comfortable or supportive for feet. Even so, it is interesting that the basic sandal, crafted by people more than four thousand years ago, still has many similarities to shoes we wear today.

Which of the following statement is false?

Read the following passage and answer the questions that follow:

Shoes Step Forward

Shoes—we wear them nearly every day. We walk, run, jump, climb, and stand in them for hours on end. Yet we hardly think about them because they are such an ordinary part of our daily lives. Shoes were not always an important part of people’s wardrobes. The ancient Greeks, Egyptians, and Persians made and wore sandals, but actually went barefoot most of the time. These people lived in regions where the weather was temperate, and shoes were not needed to keep their feet warm. Archaeologists have found shoes in the ruins of these civilizations, but they seem to have been worn mainly by royalty, who could afford to employ tailors and shoemakers.

Shoes in Early Civilizations

As shoes became more common in ancient Egypt, the first ones were simple sandals created mainly to protect the soles of the feet from rough surfaces. The easiest way to make shoes in these ancient times was to use materials that were readily available, including tree bark, leaves, and grasses. In ancient Egypt, sandals were made of rushes, which are grassy plants with hollow stalks. Rushes are the same plants used today to make chair bottoms, mats, and baskets.
Among the ancient Greeks, sandals were woven of similar plant materials, but the Greeks also varied the process by tying small pieces of wood together with dried grass. In later years, they made sandals with leather from the hides of animals. The first Greek shoes were purely functional, but over time most were dyed and decorated to make fashion statements. Women began to wear soft, enclosed leather shoes, and these grew increasingly fancy in the later years of the Greek civilization.
The Romans wore sandals much like the Greeks did, but used more pieces of leather to make them. Some Roman sandals had straps that wrapped around the ankles. Shoemakers often dyed these sandals in bright colors that represented the different jobs held by the people wearing them. The patricians, or privileged classes, wore red sandals with moon-shaped ornaments on the back. Senators wore brown shoes with four black leather straps wound around the lower leg. Consuls, or legal officers, wore white shoes, and soldiers wore heavy leather sandals that were more like boots—but with bare toes!
Meanwhile, people who lived in cold northern climates were making their shoes from the hides of furry animals, such as polar bears and yaks. The soles and tops of these shoes were made from pieces of soft leather sewn together. This type of shoe—whether or not it used fur—was called a moccasin. Some Native American groups made and wore moccasins for thousands of years. Some moccasins were plain, and others were adorned with beadwork.

The Shoemaking Process

As the centuries passed, the primary material for shoes continued to be leather, and the process of making shoes did not change quickly. A wood and metal framework called a “last” was wrapped with pieces of leather that were then sewn together. As late as the mid-1800s, lasts were straight on both sides; this meant that there was no difference in shape between left and right shoes. It also meant that shoes were uncomfortable and that breaking them in was not easy. The lasts were made in different sizes, but for a long time only two widths were available—thin and stout.

For centuries, shoes were sewn by hand, just as they had been by the ancient Egyptians. Machines to assist shoemakers were not used until the rolling machine was invented in 1845. This device was used to pound pieces of leather into thin strips. About the same time, Elias Howe invented the sewing machine, and pieces of shoe leather could now be sewn together more quickly. Another inventor, Lyman Reed Blake, created a machine for sewing the soles of shoes to the upper parts. Because shoes could be made faster and more cheaply, people who had never owned shoes before could now afford to buy and wear them.

New Trends, Materials, and Designs

In Europe and North America during the seventeenth century, most people wore boots because they were practical. Even in many large cities, dirt roads were common, and people had to walk along muddy pathways and across streams. By the eighteenth century, however, more city streets were paved with cobblestones, and it was easier to keep shoes clean. Shoes became more decorative, and fancy buckles of gold and silver were often used. Most shoes worn in the United States throughout the nineteenth century were patterned after European styles.
The major change in shoes over the last century has been the use of materials other than leather. Humphrey O’Sullivan invented the first rubber heel for shoes in 1898. Rubber heels were popular because they lasted much longer than heels made of leather. The use of rubber soles came next. The first rubber soled shoes were called plimsolls, and they were manufactured in the United States in the late 1800s.
The first American shoes made without leather were invented in 1917. The upper material was made of a flexible canvas. Those were the original “sneakers,” a word that was used because the rubber sole made the shoe very quiet, unlike most leather shoes, which often squeaked when people walked.
Many people today choose athletic shoes for casual wear, but not until the late 1970s were shoes designed with amateur athletes in mind. Shoes made of rubber and canvas was worn by tennis, volleyball, and basketball players. By the 1980s, companies began to design athletic shoes for specific sports, helping athletes perform better while protecting their feet and providing comfort.
Shoes have come a long way since the ancient Egyptians created their first sandals. Many more types of materials are used, and shoes have never been more comfortable or supportive for feet. Even so, it is interesting that the basic sandal, crafted by people more than four thousand years ago, still has many similarities to shoes we wear today.

Why were rubber heels popular?

Read the following passage and answer the questions that follow:

Shoes Step Forward

Shoes—we wear them nearly every day. We walk, run, jump, climb, and stand in them for hours on end. Yet we hardly think about them because they are such an ordinary part of our daily lives. Shoes were not always an important part of people’s wardrobes. The ancient Greeks, Egyptians, and Persians made and wore sandals, but actually went barefoot most of the time. These people lived in regions where the weather was temperate, and shoes were not needed to keep their feet warm. Archaeologists have found shoes in the ruins of these civilizations, but they seem to have been worn mainly by royalty, who could afford to employ tailors and shoemakers.

Shoes in Early Civilizations

As shoes became more common in ancient Egypt, the first ones were simple sandals created mainly to protect the soles of the feet from rough surfaces. The easiest way to make shoes in these ancient times was to use materials that were readily available, including tree bark, leaves, and grasses. In ancient Egypt, sandals were made of rushes, which are grassy plants with hollow stalks. Rushes are the same plants used today to make chair bottoms, mats, and baskets.
Among the ancient Greeks, sandals were woven of similar plant materials, but the Greeks also varied the process by tying small pieces of wood together with dried grass. In later years, they made sandals with leather from the hides of animals. The first Greek shoes were purely functional, but over time most were dyed and decorated to make fashion statements. Women began to wear soft, enclosed leather shoes, and these grew increasingly fancy in the later years of the Greek civilization.
The Romans wore sandals much like the Greeks did, but used more pieces of leather to make them. Some Roman sandals had straps that wrapped around the ankles. Shoemakers often dyed these sandals in bright colors that represented the different jobs held by the people wearing them. The patricians, or privileged classes, wore red sandals with moon-shaped ornaments on the back. Senators wore brown shoes with four black leather straps wound around the lower leg. Consuls, or legal officers, wore white shoes, and soldiers wore heavy leather sandals that were more like boots—but with bare toes!
Meanwhile, people who lived in cold northern climates were making their shoes from the hides of furry animals, such as polar bears and yaks. The soles and tops of these shoes were made from pieces of soft leather sewn together. This type of shoe—whether or not it used fur—was called a moccasin. Some Native American groups made and wore moccasins for thousands of years. Some moccasins were plain, and others were adorned with beadwork.

The Shoemaking Process

As the centuries passed, the primary material for shoes continued to be leather, and the process of making shoes did not change quickly. A wood and metal framework called a “last” was wrapped with pieces of leather that were then sewn together. As late as the mid-1800s, lasts were straight on both sides; this meant that there was no difference in shape between left and right shoes. It also meant that shoes were uncomfortable and that breaking them in was not easy. The lasts were made in different sizes, but for a long time only two widths were available—thin and stout.

For centuries, shoes were sewn by hand, just as they had been by the ancient Egyptians. Machines to assist shoemakers were not used until the rolling machine was invented in 1845. This device was used to pound pieces of leather into thin strips. About the same time, Elias Howe invented the sewing machine, and pieces of shoe leather could now be sewn together more quickly. Another inventor, Lyman Reed Blake, created a machine for sewing the soles of shoes to the upper parts. Because shoes could be made faster and more cheaply, people who had never owned shoes before could now afford to buy and wear them.

New Trends, Materials, and Designs

In Europe and North America during the seventeenth century, most people wore boots because they were practical. Even in many large cities, dirt roads were common, and people had to walk along muddy pathways and across streams. By the eighteenth century, however, more city streets were paved with cobblestones, and it was easier to keep shoes clean. Shoes became more decorative, and fancy buckles of gold and silver were often used. Most shoes worn in the United States throughout the nineteenth century were patterned after European styles.
The major change in shoes over the last century has been the use of materials other than leather. Humphrey O’Sullivan invented the first rubber heel for shoes in 1898. Rubber heels were popular because they lasted much longer than heels made of leather. The use of rubber soles came next. The first rubber soled shoes were called plimsolls, and they were manufactured in the United States in the late 1800s.
The first American shoes made without leather were invented in 1917. The upper material was made of a flexible canvas. Those were the original “sneakers,” a word that was used because the rubber sole made the shoe very quiet, unlike most leather shoes, which often squeaked when people walked.
Many people today choose athletic shoes for casual wear, but not until the late 1970s were shoes designed with amateur athletes in mind. Shoes made of rubber and canvas was worn by tennis, volleyball, and basketball players. By the 1980s, companies began to design athletic shoes for specific sports, helping athletes perform better while protecting their feet and providing comfort.
Shoes have come a long way since the ancient Egyptians created their first sandals. Many more types of materials are used, and shoes have never been more comfortable or supportive for feet. Even so, it is interesting that the basic sandal, crafted by people more than four thousand years ago, still has many similarities to shoes we wear today.

Who made machines for sewing?

Read the following passage and answer the questions that follow:

Shoes Step Forward

Shoes—we wear them nearly every day. We walk, run, jump, climb, and stand in them for hours on end. Yet we hardly think about them because they are such an ordinary part of our daily lives. Shoes were not always an important part of people’s wardrobes. The ancient Greeks, Egyptians, and Persians made and wore sandals, but actually went barefoot most of the time. These people lived in regions where the weather was temperate, and shoes were not needed to keep their feet warm. Archaeologists have found shoes in the ruins of these civilizations, but they seem to have been worn mainly by royalty, who could afford to employ tailors and shoemakers.

Shoes in Early Civilizations

As shoes became more common in ancient Egypt, the first ones were simple sandals created mainly to protect the soles of the feet from rough surfaces. The easiest way to make shoes in these ancient times was to use materials that were readily available, including tree bark, leaves, and grasses. In ancient Egypt, sandals were made of rushes, which are grassy plants with hollow stalks. Rushes are the same plants used today to make chair bottoms, mats, and baskets.
Among the ancient Greeks, sandals were woven of similar plant materials, but the Greeks also varied the process by tying small pieces of wood together with dried grass. In later years, they made sandals with leather from the hides of animals. The first Greek shoes were purely functional, but over time most were dyed and decorated to make fashion statements. Women began to wear soft, enclosed leather shoes, and these grew increasingly fancy in the later years of the Greek civilization.
The Romans wore sandals much like the Greeks did, but used more pieces of leather to make them. Some Roman sandals had straps that wrapped around the ankles. Shoemakers often dyed these sandals in bright colors that represented the different jobs held by the people wearing them. The patricians, or privileged classes, wore red sandals with moon-shaped ornaments on the back. Senators wore brown shoes with four black leather straps wound around the lower leg. Consuls, or legal officers, wore white shoes, and soldiers wore heavy leather sandals that were more like boots—but with bare toes!
Meanwhile, people who lived in cold northern climates were making their shoes from the hides of furry animals, such as polar bears and yaks. The soles and tops of these shoes were made from pieces of soft leather sewn together. This type of shoe—whether or not it used fur—was called a moccasin. Some Native American groups made and wore moccasins for thousands of years. Some moccasins were plain, and others were adorned with beadwork.

The Shoemaking Process

As the centuries passed, the primary material for shoes continued to be leather, and the process of making shoes did not change quickly. A wood and metal framework called a “last” was wrapped with pieces of leather that were then sewn together. As late as the mid-1800s, lasts were straight on both sides; this meant that there was no difference in shape between left and right shoes. It also meant that shoes were uncomfortable and that breaking them in was not easy. The lasts were made in different sizes, but for a long time only two widths were available—thin and stout.

For centuries, shoes were sewn by hand, just as they had been by the ancient Egyptians. Machines to assist shoemakers were not used until the rolling machine was invented in 1845. This device was used to pound pieces of leather into thin strips. About the same time, Elias Howe invented the sewing machine, and pieces of shoe leather could now be sewn together more quickly. Another inventor, Lyman Reed Blake, created a machine for sewing the soles of shoes to the upper parts. Because shoes could be made faster and more cheaply, people who had never owned shoes before could now afford to buy and wear them.

New Trends, Materials, and Designs

In Europe and North America during the seventeenth century, most people wore boots because they were practical. Even in many large cities, dirt roads were common, and people had to walk along muddy pathways and across streams. By the eighteenth century, however, more city streets were paved with cobblestones, and it was easier to keep shoes clean. Shoes became more decorative, and fancy buckles of gold and silver were often used. Most shoes worn in the United States throughout the nineteenth century were patterned after European styles.
The major change in shoes over the last century has been the use of materials other than leather. Humphrey O’Sullivan invented the first rubber heel for shoes in 1898. Rubber heels were popular because they lasted much longer than heels made of leather. The use of rubber soles came next. The first rubber soled shoes were called plimsolls, and they were manufactured in the United States in the late 1800s.
The first American shoes made without leather were invented in 1917. The upper material was made of a flexible canvas. Those were the original “sneakers,” a word that was used because the rubber sole made the shoe very quiet, unlike most leather shoes, which often squeaked when people walked.
Many people today choose athletic shoes for casual wear, but not until the late 1970s were shoes designed with amateur athletes in mind. Shoes made of rubber and canvas was worn by tennis, volleyball, and basketball players. By the 1980s, companies began to design athletic shoes for specific sports, helping athletes perform better while protecting their feet and providing comfort.
Shoes have come a long way since the ancient Egyptians created their first sandals. Many more types of materials are used, and shoes have never been more comfortable or supportive for feet. Even so, it is interesting that the basic sandal, crafted by people more than four thousand years ago, still has many similarities to shoes we wear today.

What is the correct hyphenated word?

Read the following passage and answer the questions that follow:

Shoes Step Forward

Shoes—we wear them nearly every day. We walk, run, jump, climb, and stand in them for hours on end. Yet we hardly think about them because they are such an ordinary part of our daily lives. Shoes were not always an important part of people’s wardrobes. The ancient Greeks, Egyptians, and Persians made and wore sandals, but actually went barefoot most of the time. These people lived in regions where the weather was temperate, and shoes were not needed to keep their feet warm. Archaeologists have found shoes in the ruins of these civilizations, but they seem to have been worn mainly by royalty, who could afford to employ tailors and shoemakers.

Shoes in Early Civilizations

As shoes became more common in ancient Egypt, the first ones were simple sandals created mainly to protect the soles of the feet from rough surfaces. The easiest way to make shoes in these ancient times was to use materials that were readily available, including tree bark, leaves, and grasses. In ancient Egypt, sandals were made of rushes, which are grassy plants with hollow stalks. Rushes are the same plants used today to make chair bottoms, mats, and baskets.
Among the ancient Greeks, sandals were woven of similar plant materials, but the Greeks also varied the process by tying small pieces of wood together with dried grass. In later years, they made sandals with leather from the hides of animals. The first Greek shoes were purely functional, but over time most were dyed and decorated to make fashion statements. Women began to wear soft, enclosed leather shoes, and these grew increasingly fancy in the later years of the Greek civilization.
The Romans wore sandals much like the Greeks did, but used more pieces of leather to make them. Some Roman sandals had straps that wrapped around the ankles. Shoemakers often dyed these sandals in bright colors that represented the different jobs held by the people wearing them. The patricians, or privileged classes, wore red sandals with moon-shaped ornaments on the back. Senators wore brown shoes with four black leather straps wound around the lower leg. Consuls, or legal officers, wore white shoes, and soldiers wore heavy leather sandals that were more like boots—but with bare toes!
Meanwhile, people who lived in cold northern climates were making their shoes from the hides of furry animals, such as polar bears and yaks. The soles and tops of these shoes were made from pieces of soft leather sewn together. This type of shoe—whether or not it used fur—was called a moccasin. Some Native American groups made and wore moccasins for thousands of years. Some moccasins were plain, and others were adorned with beadwork.

The Shoemaking Process

As the centuries passed, the primary material for shoes continued to be leather, and the process of making shoes did not change quickly. A wood and metal framework called a “last” was wrapped with pieces of leather that were then sewn together. As late as the mid-1800s, lasts were straight on both sides; this meant that there was no difference in shape between left and right shoes. It also meant that shoes were uncomfortable and that breaking them in was not easy. The lasts were made in different sizes, but for a long time only two widths were available—thin and stout.

For centuries, shoes were sewn by hand, just as they had been by the ancient Egyptians. Machines to assist shoemakers were not used until the rolling machine was invented in 1845. This device was used to pound pieces of leather into thin strips. About the same time, Elias Howe invented the sewing machine, and pieces of shoe leather could now be sewn together more quickly. Another inventor, Lyman Reed Blake, created a machine for sewing the soles of shoes to the upper parts. Because shoes could be made faster and more cheaply, people who had never owned shoes before could now afford to buy and wear them.

New Trends, Materials, and Designs

In Europe and North America during the seventeenth century, most people wore boots because they were practical. Even in many large cities, dirt roads were common, and people had to walk along muddy pathways and across streams. By the eighteenth century, however, more city streets were paved with cobblestones, and it was easier to keep shoes clean. Shoes became more decorative, and fancy buckles of gold and silver were often used. Most shoes worn in the United States throughout the nineteenth century were patterned after European styles.
The major change in shoes over the last century has been the use of materials other than leather. Humphrey O’Sullivan invented the first rubber heel for shoes in 1898. Rubber heels were popular because they lasted much longer than heels made of leather. The use of rubber soles came next. The first rubber soled shoes were called plimsolls, and they were manufactured in the United States in the late 1800s.
The first American shoes made without leather were invented in 1917. The upper material was made of a flexible canvas. Those were the original “sneakers,” a word that was used because the rubber sole made the shoe very quiet, unlike most leather shoes, which often squeaked when people walked.
Many people today choose athletic shoes for casual wear, but not until the late 1970s were shoes designed with amateur athletes in mind. Shoes made of rubber and canvas was worn by tennis, volleyball, and basketball players. By the 1980s, companies began to design athletic shoes for specific sports, helping athletes perform better while protecting their feet and providing comfort.
Shoes have come a long way since the ancient Egyptians created their first sandals. Many more types of materials are used, and shoes have never been more comfortable or supportive for feet. Even so, it is interesting that the basic sandal, crafted by people more than four thousand years ago, still has many similarities to shoes we wear today.

“Some moccasins were plain, and others were adorned with beadwork.”

What type of context clue is used to help you define the word adorned?

Read the following passage and answer the questions that follow:

Shoes Step Forward

Shoes—we wear them nearly every day. We walk, run, jump, climb, and stand in them for hours on end. Yet we hardly think about them because they are such an ordinary part of our daily lives. Shoes were not always an important part of people’s wardrobes. The ancient Greeks, Egyptians, and Persians made and wore sandals, but actually went barefoot most of the time. These people lived in regions where the weather was temperate, and shoes were not needed to keep their feet warm. Archaeologists have found shoes in the ruins of these civilizations, but they seem to have been worn mainly by royalty, who could afford to employ tailors and shoemakers.

Shoes in Early Civilizations

As shoes became more common in ancient Egypt, the first ones were simple sandals created mainly to protect the soles of the feet from rough surfaces. The easiest way to make shoes in these ancient times was to use materials that were readily available, including tree bark, leaves, and grasses. In ancient Egypt, sandals were made of rushes, which are grassy plants with hollow stalks. Rushes are the same plants used today to make chair bottoms, mats, and baskets.
Among the ancient Greeks, sandals were woven of similar plant materials, but the Greeks also varied the process by tying small pieces of wood together with dried grass. In later years, they made sandals with leather from the hides of animals. The first Greek shoes were purely functional, but over time most were dyed and decorated to make fashion statements. Women began to wear soft, enclosed leather shoes, and these grew increasingly fancy in the later years of the Greek civilization.
The Romans wore sandals much like the Greeks did, but used more pieces of leather to make them. Some Roman sandals had straps that wrapped around the ankles. Shoemakers often dyed these sandals in bright colors that represented the different jobs held by the people wearing them. The patricians, or privileged classes, wore red sandals with moon-shaped ornaments on the back. Senators wore brown shoes with four black leather straps wound around the lower leg. Consuls, or legal officers, wore white shoes, and soldiers wore heavy leather sandals that were more like boots—but with bare toes!
Meanwhile, people who lived in cold northern climates were making their shoes from the hides of furry animals, such as polar bears and yaks. The soles and tops of these shoes were made from pieces of soft leather sewn together. This type of shoe—whether or not it used fur—was called a moccasin. Some Native American groups made and wore moccasins for thousands of years. Some moccasins were plain, and others were adorned with beadwork.

The Shoemaking Process

As the centuries passed, the primary material for shoes continued to be leather, and the process of making shoes did not change quickly. A wood and metal framework called a “last” was wrapped with pieces of leather that were then sewn together. As late as the mid-1800s, lasts were straight on both sides; this meant that there was no difference in shape between left and right shoes. It also meant that shoes were uncomfortable and that breaking them in was not easy. The lasts were made in different sizes, but for a long time only two widths were available—thin and stout.

For centuries, shoes were sewn by hand, just as they had been by the ancient Egyptians. Machines to assist shoemakers were not used until the rolling machine was invented in 1845. This device was used to pound pieces of leather into thin strips. About the same time, Elias Howe invented the sewing machine, and pieces of shoe leather could now be sewn together more quickly. Another inventor, Lyman Reed Blake, created a machine for sewing the soles of shoes to the upper parts. Because shoes could be made faster and more cheaply, people who had never owned shoes before could now afford to buy and wear them.

New Trends, Materials, and Designs

In Europe and North America during the seventeenth century, most people wore boots because they were practical. Even in many large cities, dirt roads were common, and people had to walk along muddy pathways and across streams. By the eighteenth century, however, more city streets were paved with cobblestones, and it was easier to keep shoes clean. Shoes became more decorative, and fancy buckles of gold and silver were often used. Most shoes worn in the United States throughout the nineteenth century were patterned after European styles.
The major change in shoes over the last century has been the use of materials other than leather. Humphrey O’Sullivan invented the first rubber heel for shoes in 1898. Rubber heels were popular because they lasted much longer than heels made of leather. The use of rubber soles came next. The first rubber soled shoes were called plimsolls, and they were manufactured in the United States in the late 1800s.
The first American shoes made without leather were invented in 1917. The upper material was made of a flexible canvas. Those were the original “sneakers,” a word that was used because the rubber sole made the shoe very quiet, unlike most leather shoes, which often squeaked when people walked.
Many people today choose athletic shoes for casual wear, but not until the late 1970s were shoes designed with amateur athletes in mind. Shoes made of rubber and canvas was worn by tennis, volleyball, and basketball players. By the 1980s, companies began to design athletic shoes for specific sports, helping athletes perform better while protecting their feet and providing comfort.
Shoes have come a long way since the ancient Egyptians created their first sandals. Many more types of materials are used, and shoes have never been more comfortable or supportive for feet. Even so, it is interesting that the basic sandal, crafted by people more than four thousand years ago, still has many similarities to shoes we wear today.

What genre does this passage belong to?

Read the following passage and answer the questions that follow:

Shoes Step Forward

Shoes—we wear them nearly every day. We walk, run, jump, climb, and stand in them for hours on end. Yet we hardly think about them because they are such an ordinary part of our daily lives. Shoes were not always an important part of people’s wardrobes. The ancient Greeks, Egyptians, and Persians made and wore sandals, but actually went barefoot most of the time. These people lived in regions where the weather was temperate, and shoes were not needed to keep their feet warm. Archaeologists have found shoes in the ruins of these civilizations, but they seem to have been worn mainly by royalty, who could afford to employ tailors and shoemakers.

Shoes in Early Civilizations

As shoes became more common in ancient Egypt, the first ones were simple sandals created mainly to protect the soles of the feet from rough surfaces. The easiest way to make shoes in these ancient times was to use materials that were readily available, including tree bark, leaves, and grasses. In ancient Egypt, sandals were made of rushes, which are grassy plants with hollow stalks. Rushes are the same plants used today to make chair bottoms, mats, and baskets.
Among the ancient Greeks, sandals were woven of similar plant materials, but the Greeks also varied the process by tying small pieces of wood together with dried grass. In later years, they made sandals with leather from the hides of animals. The first Greek shoes were purely functional, but over time most were dyed and decorated to make fashion statements. Women began to wear soft, enclosed leather shoes, and these grew increasingly fancy in the later years of the Greek civilization.
The Romans wore sandals much like the Greeks did, but used more pieces of leather to make them. Some Roman sandals had straps that wrapped around the ankles. Shoemakers often dyed these sandals in bright colors that represented the different jobs held by the people wearing them. The patricians, or privileged classes, wore red sandals with moon-shaped ornaments on the back. Senators wore brown shoes with four black leather straps wound around the lower leg. Consuls, or legal officers, wore white shoes, and soldiers wore heavy leather sandals that were more like boots—but with bare toes!
Meanwhile, people who lived in cold northern climates were making their shoes from the hides of furry animals, such as polar bears and yaks. The soles and tops of these shoes were made from pieces of soft leather sewn together. This type of shoe—whether or not it used fur—was called a moccasin. Some Native American groups made and wore moccasins for thousands of years. Some moccasins were plain, and others were adorned with beadwork.

The Shoemaking Process

As the centuries passed, the primary material for shoes continued to be leather, and the process of making shoes did not change quickly. A wood and metal framework called a “last” was wrapped with pieces of leather that were then sewn together. As late as the mid-1800s, lasts were straight on both sides; this meant that there was no difference in shape between left and right shoes. It also meant that shoes were uncomfortable and that breaking them in was not easy. The lasts were made in different sizes, but for a long time only two widths were available—thin and stout.

For centuries, shoes were sewn by hand, just as they had been by the ancient Egyptians. Machines to assist shoemakers were not used until the rolling machine was invented in 1845. This device was used to pound pieces of leather into thin strips. About the same time, Elias Howe invented the sewing machine, and pieces of shoe leather could now be sewn together more quickly. Another inventor, Lyman Reed Blake, created a machine for sewing the soles of shoes to the upper parts. Because shoes could be made faster and more cheaply, people who had never owned shoes before could now afford to buy and wear them.

New Trends, Materials, and Designs

In Europe and North America during the seventeenth century, most people wore boots because they were practical. Even in many large cities, dirt roads were common, and people had to walk along muddy pathways and across streams. By the eighteenth century, however, more city streets were paved with cobblestones, and it was easier to keep shoes clean. Shoes became more decorative, and fancy buckles of gold and silver were often used. Most shoes worn in the United States throughout the nineteenth century were patterned after European styles.
The major change in shoes over the last century has been the use of materials other than leather. Humphrey O’Sullivan invented the first rubber heel for shoes in 1898. Rubber heels were popular because they lasted much longer than heels made of leather. The use of rubber soles came next. The first rubber soled shoes were called plimsolls, and they were manufactured in the United States in the late 1800s.
The first American shoes made without leather were invented in 1917. The upper material was made of a flexible canvas. Those were the original “sneakers,” a word that was used because the rubber sole made the shoe very quiet, unlike most leather shoes, which often squeaked when people walked.
Many people today choose athletic shoes for casual wear, but not until the late 1970s were shoes designed with amateur athletes in mind. Shoes made of rubber and canvas was worn by tennis, volleyball, and basketball players. By the 1980s, companies began to design athletic shoes for specific sports, helping athletes perform better while protecting their feet and providing comfort.
Shoes have come a long way since the ancient Egyptians created their first sandals. Many more types of materials are used, and shoes have never been more comfortable or supportive for feet. Even so, it is interesting that the basic sandal, crafted by people more than four thousand years ago, still has many similarities to shoes we wear today.

Identify the figure of speech.

Read the following passage and answer the questions that follow:

Shoes Step Forward

Shoes—we wear them nearly every day. We walk, run, jump, climb, and stand in them for hours on end. Yet we hardly think about them because they are such an ordinary part of our daily lives. Shoes were not always an important part of people’s wardrobes. The ancient Greeks, Egyptians, and Persians made and wore sandals, but actually went barefoot most of the time. These people lived in regions where the weather was temperate, and shoes were not needed to keep their feet warm. Archaeologists have found shoes in the ruins of these civilizations, but they seem to have been worn mainly by royalty, who could afford to employ tailors and shoemakers.

Shoes in Early Civilizations

As shoes became more common in ancient Egypt, the first ones were simple sandals created mainly to protect the soles of the feet from rough surfaces. The easiest way to make shoes in these ancient times was to use materials that were readily available, including tree bark, leaves, and grasses. In ancient Egypt, sandals were made of rushes, which are grassy plants with hollow stalks. Rushes are the same plants used today to make chair bottoms, mats, and baskets.
Among the ancient Greeks, sandals were woven of similar plant materials, but the Greeks also varied the process by tying small pieces of wood together with dried grass. In later years, they made sandals with leather from the hides of animals. The first Greek shoes were purely functional, but over time most were dyed and decorated to make fashion statements. Women began to wear soft, enclosed leather shoes, and these grew increasingly fancy in the later years of the Greek civilization.
The Romans wore sandals much like the Greeks did, but used more pieces of leather to make them. Some Roman sandals had straps that wrapped around the ankles. Shoemakers often dyed these sandals in bright colors that represented the different jobs held by the people wearing them. The patricians, or privileged classes, wore red sandals with moon-shaped ornaments on the back. Senators wore brown shoes with four black leather straps wound around the lower leg. Consuls, or legal officers, wore white shoes, and soldiers wore heavy leather sandals that were more like boots—but with bare toes!
Meanwhile, people who lived in cold northern climates were making their shoes from the hides of furry animals, such as polar bears and yaks. The soles and tops of these shoes were made from pieces of soft leather sewn together. This type of shoe—whether or not it used fur—was called a moccasin. Some Native American groups made and wore moccasins for thousands of years. Some moccasins were plain, and others were adorned with beadwork.

The Shoemaking Process

As the centuries passed, the primary material for shoes continued to be leather, and the process of making shoes did not change quickly. A wood and metal framework called a “last” was wrapped with pieces of leather that were then sewn together. As late as the mid-1800s, lasts were straight on both sides; this meant that there was no difference in shape between left and right shoes. It also meant that shoes were uncomfortable and that breaking them in was not easy. The lasts were made in different sizes, but for a long time only two widths were available—thin and stout.

For centuries, shoes were sewn by hand, just as they had been by the ancient Egyptians. Machines to assist shoemakers were not used until the rolling machine was invented in 1845. This device was used to pound pieces of leather into thin strips. About the same time, Elias Howe invented the sewing machine, and pieces of shoe leather could now be sewn together more quickly. Another inventor, Lyman Reed Blake, created a machine for sewing the soles of shoes to the upper parts. Because shoes could be made faster and more cheaply, people who had never owned shoes before could now afford to buy and wear them.

New Trends, Materials, and Designs

In Europe and North America during the seventeenth century, most people wore boots because they were practical. Even in many large cities, dirt roads were common, and people had to walk along muddy pathways and across streams. By the eighteenth century, however, more city streets were paved with cobblestones, and it was easier to keep shoes clean. Shoes became more decorative, and fancy buckles of gold and silver were often used. Most shoes worn in the United States throughout the nineteenth century were patterned after European styles.
The major change in shoes over the last century has been the use of materials other than leather. Humphrey O’Sullivan invented the first rubber heel for shoes in 1898. Rubber heels were popular because they lasted much longer than heels made of leather. The use of rubber soles came next. The first rubber soled shoes were called plimsolls, and they were manufactured in the United States in the late 1800s.
The first American shoes made without leather were invented in 1917. The upper material was made of a flexible canvas. Those were the original “sneakers,” a word that was used because the rubber sole made the shoe very quiet, unlike most leather shoes, which often squeaked when people walked.
Many people today choose athletic shoes for casual wear, but not until the late 1970s were shoes designed with amateur athletes in mind. Shoes made of rubber and canvas was worn by tennis, volleyball, and basketball players. By the 1980s, companies began to design athletic shoes for specific sports, helping athletes perform better while protecting their feet and providing comfort.
Shoes have come a long way since the ancient Egyptians created their first sandals. Many more types of materials are used, and shoes have never been more comfortable or supportive for feet. Even so, it is interesting that the basic sandal, crafted by people more than four thousand years ago, still has many similarities to shoes we wear today.

“The upper material was made of a flexible canvas.”
Choose a synonym for flexible.

In the following sentence, there is a spelling mistake. Choose the letter which matches the part of the sentence with the mistake. If there’s no mistake, choose N.

(A) A closely-fitting (B) adjustible piston (C) is mostly provided (D) at one end.(N)

In the following sentence, there is a spelling mistake. Choose the letter which matches the part of the sentence with the mistake. If there’s no mistake, choose N.

(A) The dictionery (B) files are specified(C) in the book's (D) appendix. (N)

In the following sentence, there is a spelling mistake. Choose the letter which matches the part of the sentence with the mistake. If there’s no mistake, choose N.

(A) They travelled to (B) the temple in(C)   search of spiritual (D) illuminasion and peace. (N)

In the following sentence, there is a spelling mistake. Choose the letter which matches the part of the sentence with the mistake. If there’s no mistake, choose N.

(A) She's a specialist (B) in canine (C) pshycology and (D) associated behaviour. (N)

In the following sentence, there is a spelling mistake. Choose the letter which matches the part of the sentence with the mistake. If there’s no mistake, choose N.

(A) The universel habit (B) of writing modified (C) primitive custom (D) and ancient precedent.(N)

Choose the right word or phrase provided below to complete the following sentence.

The decision was_______ by the government within the deadline.