C-10

The operator of each vessel subject to the pollution regulations is NOT required to keep written records of __________.

Hose information not marked on the hose

Cargoes carried and dates delivered, including destinations

The date and results of the most recent equipment inspection

The name of each person designated as a person in charge

An ocean going ship of 4000 gross tons must be fitted with a standard discharge shore connection for the discharge of oily wastes to a reception facility. The dimensions for the connection are specified in the Pollution Prevention Regulations under Part _

151

153

154

155

154

153

155

151

An ocean going ship of over 400 gross tons must be fitted with a standard discharge shore connection. What size bolt circle diameter is required for this shore connection to transfer oily ballast to a shore side reception facility

183

125

215

250

Pollution Prevention Regulations state that no person may transfer oil to or from a vessel unless _____________.

A sample has been taken from the oil being received

Hoses are supported so that couplings have no strain on them

Each part of the transfer system is blown through with air

An oil containment boom is available for immediate use

According to regulations, when loading, or discharging oil in bulk at a dock, which of the following signals must be displayed?

A signal is not required for discharging oil, only gasoline

A yellow flag (day), red light (night)

A green flag (day), green light (night)

A red flag (day), red light (night)

A shipboard oil pollution emergency plan is required of ______________.

All vessels, regardless of size and commercial application

Any barge or other ship which is constructed or operated in such a manner that no oil in any form can be carried aboard

An oil tanker of 400 gross tons and above, or other ships of 10 gross tons and abov

An oil tanker of 150 gross tons or above, or other ship of 400 gross tons or above

Shipboard oil pollution emergency plans must be reviewed ___________..

Annually by the owner and submit a letter to the Coast Guard within one month of the anniversary date of the plan approval

Only once every five years and a letter submitted six months prior to expiration

Annually by the owner and a letter sumitted six months prior to expiration

And the entire plan resubmitted for approval once every five years, six months prior to expiration

Coast Guard Regulations require the emergency bilge system to _____.

Have a cross connection to the ballast system

Be independent of the main bilge system

Be a part of the independent bilge system

Have an independent priming pump

Coast Guard regulations require a shipboard oil pollution emergency plan to be reviewed

Biennially only

Annually only

Quad‐annually only

Only one every five years

The term arrival ballast refers to ___________.

Any form of sea water ballast

Dirty ballast

Clean ballast

Brackish water ballast

Water ballast placed in a tank that has been crude oil washed, but not water rinsed, shall be regarded as ________.

Dirty ballast

Clean ballast

Crude oil

Segregated ballast

Regulations, state that ocean going ships of 400 gross tons and above must be fitted with a standard discharge shore connection for the discharge of oily waste from machinery space bilges to reception facilities. The flange of this discharge connection mu

10 mm in thickness

Designed to accept pipes up to a maximum internal diameter of 100mm

Suitable for a service pressure of 6 kg/cm2

Slotted to receive eight bolts and 20 mm in diameter

In an oil pumping operation where pumping connections are made up of flanged hoses the weakest link is the _________.

Bolt hole

Stud

Flange

Hose

The term segregated ballast is defined in the Pollution Prevention Regulations as ballast water introduced into a/an ____________.

Isolated tank for analysis because of its noxious properties

Water separator for segregation

Tank that is completely separated from the cargo oil and fuel oil systems

Fuel settling tank for segregation from lighter fluids

Pollution Prevention Regulations require that on the completion of oil transfer operations all _____________.

Hoses shall be blown down with air

Persons on duty during oil transfer shall be accounted for

Soundings shall be entered in the oil record book

Valves used during transfer shall be closed

Remote control for stopping machinery driving fuel oil service pumps is required. These controls shall be _______.

Provided with a locked cover

Protected against accidental operation

Located at the control platform

Essible to authorized personnel only

According to Regulations (46 CFR), no vessel can come alongside or remain alongside a tank vessel while it is loading A, B, or C grade cargo without having the permission of the ____________.

USCG captain of the port

Officer‐in‐charge of the vessel which is loading

Terminal manager

Tank ship owner

To avoid oil from discharge into the sea when ballasting _______________.

Start the cargo p/p then close sea suction valve

Start cargo p/p then open sea discharge valve

Start cargo p/p then open sea strainer valve

Start the cargo p/p then open sea suction valve

Which of the following liquids can ordinarily be discharge overboard without being processed through an oily water separator?

Cargo pumproom bilges

Engine room bilges

Cargo tank ballast

Segregated ballast

No person may transfer oil to or from a vessel unless the person in charge

Is in the immediate vicinity and immediately available to the oil transfer personnel

Has in his or her possession a copy of the vessels Oil Record Book

Has notified the captain of the port at least 24 hours before beginning each oil transfer operation

Has in his or her possession a valid Certificate of Inspection or Tank Vessel Examination Letter

When completing the ballasting operation of a contaminated tank, which of the following problems must be guarded against?

Loss of pump suction

Back flow of contaminated water

Insufficient pump pressure when topping of

Motor overload due to high discharge head

To prevent oil from escaping into the sea when ballasting through the cargo piping system, you should FIRST _________.

Open sea suction valves, then start the cargo pump

Open block valves, then start the cargo pump

Open sluice valves, then start the cargo pump

Start the cargo pump, then open sea suction

During topping off of bunker tanks, the loading rate must be personally supervised by the ____________.

Person‐in‐charge

Terminal operator

Master

Chief engineer

The minimum number of bolts necessary for a standard ANSI oil transfer hose temporary flange coupling (eight bolt hole flange) is ____________________.

Six bolts

Two bolts

Four bolts

Eight bolts

According to Pollution Prevention Regulations, when may a person serve as the person‐in‐charge of both a vessel and a facility during oil transfer operations?

When licensed as a certified refueling officer.

Whenever the vessel is short of manpower.

When authorized by the Captain of the Port.

Whenever the facility is unmanned.

Which significant combustion elements of fuel oil is a major source of air pollution/

Hydrogen

Sulphur

Carbon

Nitrogen

Which list is not required to be provided as part of the appendices of the Shipboard Oil Pollution Emergency Plan?

List of agencies or officials in regularly visited ports.

Incident reports

Must be notified.

A list of personnel duty assignments.

Why is it important for fuel oil tank not to be topped off when loading cold oil?

The change in its specific volume when heated may cause an overflo

Air pockets may cause the fuel oil to bubble out of the ullage hole

The fuelling valve may become stuck closed and cause the fuel oil to spill before the valve can be opened

Increased viscosity of the product needs higher loading pressure which increases the chance of spill

The Shipboard Oil Pollution Emergency Plan must include __________.

A one‐line schematic of the plan to be implemented

An explanation and purpose of the plan

The operating instructions for any and all oily‐water separators installed aboard the vessel

All information ordinarily provided in the Oil Record Book

Before a vessel can pump oily water within a Special Area, it has to comply with the following conditions except_________.

It must be more than 12 miles from the nearest coast

Have an oily water separating system in operation

That the filter system have an automatic cut‐off when the wastes are found to exceed 15 ppm of oily residue

Be underway

If you observe any situation which presents a safety or pollution hazard during fuel transfer operations which action should you take first?.

Notify the person in charge of the shore facility.

Close the valves at the manifold.

Shut down the operation.

Sound the general alarm.

To whom is the first report rendered in the oil pollution contingency plan of the vessel?

Coast guard

Ship's agent

Port authorities

Ship's owner

a tanker ship, sanitary inspections of the crew's quarters are the responsibility of the __________.

Master and union delegate

Master and Chief Engineer

Master and Second Mate

Master and Chief Mate

Among other restrictions, an oil tanker may not discharge an oily mixture into the sea from a cargo tank, slop tank, or cargo pump room bilge unless the vessel is_________ .

Discharging at an instantaneous rate of oil content not exceeding 30 liters per nautical mile

At anchor or stopped

More than 12 nautical miles from the nearest land

Is within "Special Areas" defined in Regulation 1 (10) of Annex I to MARPOL 73/78

Under the Pollution Regulations, when you dump garbage in to the sea you must __________.

Make an entry in the Official Logbook

No action is required if you are more than 25 miles from land and no plastic materials are dumped

Notify the U.S. Coast Guard

Keep a record for two year

When amendments are made to the Shipboard Oil Pollution Emergency Plan, the revisions must be submitted to the administration __________.

One month before the anniversary date of the plan

And cannot be implemented without approval

And can be implemented without immediate approval as long as final approval is received within six months of submission

Six months before the end of the approval period

Which is a mandatory section of the shipboard Oil Pollution Emergency Plan?

Removal equipment list

Planned exercises

Reporting requirements

List of individuals required to respond

Which is not a mandatory part of the Shipboard Oil Pollution Emergency Plan?

Diagrams

National and local coordination

Steps to control a discharge

Reporting requirements

Pollution regulation requires that each scupper in an enclosed deck area have a __________.

Wooden plug

Mechanical means of closing

Two‐piece soft patch

Soft rubber plug

According to the Coast Guard Pollution Prevention Regulations (33 CFR), what is the minimum number of bolts required in a temporarily connected standard ANSI coupling?

4 bolts

2 bolts

6 bolts

8 bolts

Pollution Prevention Regulations, state that no person may transfer oil to or from a vessel unless _____________.

Oil residue has been drained from all hoses

An oil containment boom is available for immediate use

All parts of the transfer system have been properly lined up

A representative sample has been taken from the oil being received

Ccording to the Pollution Prevention Regulations, the declaration of inspection is the ____________.

Paper issued by the Coast Guard marine inspector which allows you to conduct a transfer operation

Annual report submitted by vessel personnel to the Coast Guard declaring that all transfer equipment has been inspected

Application you must complete and submit to the Coast Guard to have an inspector visit your vessel

Document signed by vessel and shore facility persons‐in‐charge declaring that all transfer requirements have been met

According to the Pollution Prevention Regulations, who makes the final decision of when oil transfer may begin?

Any local Coast Guard representative

The designated person in‐charge

The captain of the port

The senior deck officer present

According to Pollution Prevention Regulations, if a cargo hose shows a small leak in its fabric, you may transfer oil after______________.

The terminal foreman is notified

The hose is replaced

A drip pan is placed under the leak

The hose leak is securely wrapped

According to Pollution Prevention Regulations (33 CFR), the minimum number of bolts permitted in an ANSI standard flange on an oil hose is_______________.

Nine

Six

Four

Three

The standard outside diameter pipelines to enable pipes of reception facilities to be connected with the ships discharge pipelines for residues from machinery bilges should be_________.

215 mm

225 mm

250 mm

235 mm

Plastic material may be discharged overboard from a vessel if it is __________.

3 miles from shore

12 miles from shore

25 miles from shore

Prohibited to throw overboard

One of the requirements for an oil tanker operating with Dedicated Clean Ballast shall be that it is equipped with_________.

An oil content meter

A COW system

Segregated Ballast Tanks and PL

Two separate slop tanks

Why is it important for fuel oil tank not to be topped off when loading cold oil?

Increased viscosity of the product needs higher loading pressure which increases the chance of spill

Air pockets may cause the fuel oil to bubble out of the ullage hole

The fuelling valve may become stuck closed and cause the fuel oil to spill before the valve can be opened

The change in its specific volume when heated may cause an overflow

Unlock and Upgrade

Remove all limits from your Quizzes

More Quizzes