Module 2

What is the purpose of a pre-construction conference/meeting?

What is the maximum allowed percentage for mobilization and demobilization costs?

For Road Projects with a project cost above 200M, what is the maximum prescribed time for the preparation of As-Staked Plan?

What is the first priority for the location of temporary structures?

Who is responsible for preparing the Construction Safety and Health Program (CSHP)?

What is the purpose of an as-staked survey in a construction project?

Department Order governing Test on Bored Piles

A type of tool primarily utilized to tighten bolts in Steel Construction

What is the term coined for the general component of the bridge that comprises piers, bored piles, columns and abutments?

What is the document being accomplished during the bored piling activities for records and documentation purposes of the details pouring activity?

A type of drilling tool attached to a drilling equipment with a hollow, cylindrical section fitted with a hatch on the bottom with a slit that is attached by a hinge to one end of the cylinder

A type of test conducted on a newly completed bored pile in order to determine its bearing capacity?

According to the Department Order on Test on Bored Piles, the Pile Integrity test should be conducted at least 7 days after the concrete pouring of bored pile.

What is the term coined for the general component of the bridge that comprises girders, approach slab and deck slab?

A bridge construction methodology that utilizes diesel hammers for the construction of pile foundations?

When can a PDA test be conducted on a bored pile?

What do you call the upper portion of the tunnel in excavation?

It acts as an immediate sealing layer after tunnel excavation

__________ is utilized for the controlled excavation of the tunnel face.

________ consists of grid beam system to protect slope surfaces from erosion, or used as a supporting structure, combined with ground anchors or soil nails to stabilize the slope against failures.

What is the Item No. of Tunnel Excavation?

What is the interior finish of Davao City Bypass Tunnel?

What is the minimum dimension/area for compaction trial for item 104?

Roadway embankment of earth material shall be placed in horizontal layers not exceeding loose measurement, and shall be compacted as specified before the next layer is placed.

What is Item 100 of the DPWH Specification (Blue Book)?

For item 104, Rolling/ compaction operation shall progress gradually from the sides to the center, parallel to the center of the road and shall continue until the whole surface has been rolled up to the number of passes required where a minimum density of

In placing concrete, to avoid the segregation of materials, what is the maximum height that the concrete be unloaded into an approved spreading device?

During concrete pouring (PCP), vibrators shall not be permitted to come in contact with a joint assembly and the vibrator shall not be operated longer than seconds in any one location

It is a form of road that diverts traffic from any existing roadway whenever the construction operations block the flow of traffic.

It is the uppermost structural component of the roadway which provides resistance to wear and shearing stress due to traffic load.

One of the main road components that usually located beneath or alongside the roadway used in collecting, transporting and disposing of surface water originating in or near the road right-of-way.

These are individual stabilizing layers of selected material and designed thickness placed on top of the subgrade to distribute the load transmitted from the surface course.

For the removal of existing structures and obstructions, pavement, Sidewalks, Curbs, etc. Shall be broken into pieces, the size of which shall not exceed ____mm in any dimension.

How far from the toe of the fill and slope or beyond rounding of cut slopes should Clearing and Grubbing be extended?

It is the deterioration of the upper concrete slab surface of more than 10mm affecting the whole slab.

What is the application rate of Tack Coat (Bitumol)?

Type of Roadway Maintenance in which the activities are regularly performed throughout the year and includes carriageway maintenance and roadside maintenance.

The first advance warning sign that must be seen by drivers in order to inform them about the ongoing roadway maintenance activity.

What is the response time for the repair of Code 01 (Pothole)?

What type of paint defects is the result of inadequate sealing of surface at the first application?

What is the best remedy of paint defects for Flaking?

It is a synthetic flooring material that is durable, affordable and easy to install.

What is the type of Aluminum Curtain System that is composed of large units that are assembled and glazed in the factory, shipped to the site and erected on the building?

What type of window is easy to clean and maintain?

What type of window is very effective in encouraging cross- ventilation?

What is the BEST ceiling material to be used in the Veranda?

The following are the types of Architectural Works, EXCEPT:

What is called a structure includes anything built by fusing together materials with help from mortar?

What type of waterproofing creates a continuous, elastic membrane with excellent mechanical strength, without joints or seams, and is used for both total sealing of flat roof surfaces and for local waterproofing of cracks?

Bluebook Item 104