DV015
Technical Specifications Quiz
Test your knowledge on technical specifications and performance metrics with our engaging quiz. Challenge yourself with questions focused on electrical systems, vehicle dynamics, and technical regulations.
Key features of the quiz:
- 8 multiple-choice questions
- Focus on real-world applications
- Designed for engineering and automotive enthusiasts
Which statement is false?
A green indicator light in the cockpit that is easily visible with “TS off” must light up if the TS is deactivated.
Signals influencing the TSAL and the indicator are SCS
The TSAL must be designed, that a single point of failure will not show a deactivated TS.
If an TS accumulator container is removed from the vehicle, a device must be used which logically replaces the TSAL parts inside the accumulator container.
The voltage outside of the TS accumulator must at least be measured by two means independently.
The driver must be able to activate and deactivate the TS, from within the cockpit without the assistance of any other person.
The ready-to-drive sound level must be a minimum of 70 dBA and a maximum of 80 dBA, fast weighting.
The TSAL and all needed circuitry must be hard wired electronics. Software control is not permitted.
The electrical department needs to calculat an low pass filter for the analogous signal of the brake system pressure sensor. The layout of the low pass filter is shown in the picture below. The sampling time is 1,14ms. Which couple of R and L values are wrong due to the alias effect.
R= 200 ohm; L= 0,14H
R= 420 ohm; L= 0,172H
R= 220 ohm; L= 0,076H
R= 200 ohm; L= 0,212H
Other
Please Specify:
Due to the Faculty Advisor a resonant circuit is needed in the already existing electrical concept. To do so, Dave calculated with the resonant circuit equation a needed overall capacity of 45µF. In his calculations he used a capacity loss of Cs = 34µF. Which of the giving examples were used as values for the missing capacities when the capacities are identical.
22 µF
23 µF
36 µF
26 µF
Other
Please Specify:
Alberto is arguing heavily during the competition with an scrutineer about the Quick Jack. What could happen?
25 point penalty for the team.
The whole team is eliminated of the competition.
Alberto is eliminated as a team member.
This is considered a violation of intent.
A ball of 100g falls from a height of 5 meters. On the impact, 30% of the kinetic energy is lost. How high does the ball bounce?(Answer in m; 3 decimals)
Skip
Other
Please Specify:
Regarding the image, which will be the value of Ma and Fv?
Skip
Other
Please Specify:
What is the typical value of an undercut f, on a type E gear of 20mm diameter shaft?
Skip
Other
Please Specify:
Your team drove an endurance time of 1540s. You hit 7 Doo´s, and 2 OC´s . The best team Hit 5 Doo´s and 1 OC. You achieved an endurance score of 280,7482. What is the endurance time of the fastest team excluding the penalties?
Skip
Other
Please Specify:
{"name":"DV015", "url":"https://www.quiz-maker.com/QPREVIEW","txt":"Test your knowledge on technical specifications and performance metrics with our engaging quiz. Challenge yourself with questions focused on electrical systems, vehicle dynamics, and technical regulations.Key features of the quiz:8 multiple-choice questionsFocus on real-world applicationsDesigned for engineering and automotive enthusiasts","img":"https:/images/course1.png"}
More Quizzes
Oorja Quiz-2
1588
RuleBook Quiz-1
10513
FSG Test Quiz Barcelona 2 (by FSTL)
15830
Rulebook Quiz
1050
Engineering Inspection Challenge
840
Chassis (RuleBook T1-T7)
10518
Engineering Knowledge Challenge
9429
Pradnya1
15810
Formula bharat rule book practice quiz
1588
Formula bharat quiz
1586
FB 2020
311619
Rulebook Quiz 2nd of may
15810