Formula bharat
Formula Bharat Technical Quiz
Test your knowledge on Formula Bharat regulations and technical specifications! This quiz covers various aspects of vehicle design, safety regulations, and engineering principles crucial for participation in motorsport events.
Prepare yourself with key topics, including:
- Tire specifications
- Design engineering
- Aerodynamics
- Safety regulations
the wheel/tire assembly keep out zone extends laterally
75 mm in front of and 75 mm behind the outer diameter of the front and rear tires
From the outside plane of the wheel/tire to the inboard plane of the wheel/tire assembly
90 mm in front of and 90 mm behind the outer diameter of the front and rear tires
Both a) and c)
The tires on the vehicle when it is presented for technical inspection are
Dry tires
Wet tyres
Can be either
to re-enter the track after using the slow lane
Yellow flag
Blue flag
Red and yellow flag
Green flag
What is the maximum score for mechanical structural engineering in design event
40
30
20
10
Upright driving position - position with a seat back angled at __ from the vertical as measured along the line joining the two 200mm axles of percy
30° or less
45° or less
60° or less
90° or less
Tread depth of tires
Maximum 2.5mm
Minimum 2.4mm
Maximum 2.4mm
All fibers laid within orientation ___ count as parallel in composite structure
+/-20°
+/-10°
+/-5°
Between +/-15°and +/-20°
In laminate testing representative test panel must measure exactly __
250mm×500mm
275mm×500mm
200mm×350mm
100mm×350mm
Which is relevant to tilt test
Tilt test is conducted with driver fully strapped in normal driving conditions
Vehicle's fluid at their maximum level
None of the above
Select the correct option regarding aerodynamics devices
Aerodynamic device lower than 500 must be wider than most outboard point of the front and rear wheel
All aerodynamic devices must not extend further rearward than 700mm from the most rearward part of the rear tyres
Any aerodynamic device must be able to withstand a force of 50 N applied in any direction at any point and not deflect more than 10 mm.
None of the above
Reclined driving position -
Position with seat back angled at more than 30° from the horizontal
Position with seat back angled at more than 30° from the vertical.
Position with a seat back angled at 30° or less from the vertical.
Safety uncritical rule violations without a benefit to the team that cannot be changed at the event may result in atleast ___ penalty points for the teams.
20
15
10
�Fasteners” are additional items necessary to
Assemble the assembly
Giving shape to parts
Assemble the parts
_____” are the necessary operations to produce the “part” out of the “material”.
Tooling
Fabrication
Processes
How much points are awarded for Knowledge of Documents and Vehicle
10
15
20
None of these
{"name":"Formula bharat", "url":"https://www.quiz-maker.com/QPREVIEW","txt":"Test your knowledge on Formula Bharat regulations and technical specifications! This quiz covers various aspects of vehicle design, safety regulations, and engineering principles crucial for participation in motorsport events.Prepare yourself with key topics, including:Tire specificationsDesign engineeringAerodynamicsSafety regulations","img":"https:/images/course3.png"}