Unlock hundreds more features
Save your Quiz to the Dashboard
View and Export Results
Use AI to Create Quizzes and Analyse Results

OR
Sign inSign in with Facebook
Sign inSign in with Google
Quizzes > Quizzes for Business > Human Resources

Take the Employee Health and Safety Training Quiz

Test Your Workplace Safety Knowledge Now

Difficulty: Moderate
Questions: 20
Learning OutcomesStudy Material
Colorful paper art depicting elements related to Employee Health and Safety Training Quiz

Use this Employee Health and Safety Training quiz to check your hazard awareness, PPE use, and safe work steps in 15 quick questions. You'll spot gaps before a shift, training, or audit. If you want more practice, take the short safety quiz or explore the compliance quiz .

Which of the following is considered a physical hazard in the workplace?
Poor communication
Exposure to loud noise
Workplace stress
Incorrect record keeping
A physical hazard is any environmental factor that can cause harm to the body. Loud noise is an example of a physical hazard that can lead to hearing damage. The other options relate to administrative or psychosocial issues rather than physical threats.
Which piece of personal protective equipment is most appropriate for protecting the respiratory system against dust?
Ear plugs
Safety goggles
Safety boots
Respirator mask
A respirator mask is designed to filter out airborne particles such as dust and protect the lungs. Safety goggles protect the eyes, ear plugs protect hearing, and safety boots protect the feet. Only the respirator addresses inhalation hazards.
What does the color red typically signify on workplace safety signage?
Information or guidance
Danger or prohibition
Mandatory action
Caution or warning
Red signage is used to indicate immediate danger or actions that are prohibited, such as stop or do not enter. Mandatory actions are typically blue, warnings are yellow, and informational signs are green or white. This color coding helps employees quickly recognize risk levels.
Which routine practice can help prevent muscle strain injuries on the job?
Taking regular breaks and stretching
Working continuously without pause
Increasing load without assessment
Skipping warm-up activities
Taking regular breaks and performing stretches reduces muscle fatigue and lowers the risk of strain injuries. Continuous work without rest increases the likelihood of overuse injuries. Proper warm-up and load assessment are also critical for safe manual tasks.
What does MSDS stand for in health and safety documentation?
Mechanical Safety Design Specification
Maximum Safe Dose Standard
Mandatory Safety Development Summary
Material Safety Data Sheet
MSDS stands for Material Safety Data Sheet, which provides detailed information about chemical properties, hazards, and safe handling procedures. It is a fundamental document under hazard communication regulations. The other options are not standard industry terms.
In the event of a minor chemical spill with no injuries, what is the appropriate immediate action?
Ignore the spill and continue working
Consult the Safety Data Sheet (SDS) and use a spill kit
Clean the spill with water and a cloth without PPE
Evacuate everyone and call the fire department
The correct first step is to consult the SDS for hazard information and use a spill kit while wearing proper PPE. Evacuation is for major incidents, and cleaning without PPE is unsafe. Ignoring a spill violates safety protocols.
If an employee is working at heights above six feet, which personal protective equipment is mandatory?
Dust mask
Chemical-resistant gloves
Welding helmet
Full-body safety harness
A full-body safety harness is required when working at heights to prevent falls. Dust masks protect against particulates, welding helmets protect eyes and face from welding hazards, and chemical gloves protect against chemical exposure, none of which address fall risk.
During a fire drill, what is the primary purpose of gathering at an assembly point?
To investigate the fire source
To demonstrate firefighting techniques
To account for all personnel in a safe location
To resume work quickly
Assembly points are designated safe areas where personnel are accounted for after evacuation. This ensures no one is left inside the building. Drills are not used to resume work immediately, investigate sources, or conduct training demonstrations at the assembly point.
Which of the following best represents the correct order of the hierarchy of controls?
Administrative Controls, PPE, Elimination, Engineering Controls, Substitution
Elimination, Substitution, Engineering Controls, Administrative Controls, PPE
Substitution, PPE, Elimination, Administrative Controls, Engineering Controls
PPE, Administrative Controls, Engineering Controls, Substitution, Elimination
The hierarchy of controls prioritizes eliminating hazards first, then substituting less hazardous options, implementing engineering measures, applying administrative policies, and lastly providing PPE. This sequence maximizes risk reduction efficiency.
Under OSHA regulations, who holds primary responsibility for providing a safe workplace?
The visitor
The local fire department
The employer
The customer
OSHA places the primary duty of ensuring a safe and healthful workplace on the employer. Customers, visitors, and external agencies do not bear this regulatory responsibility, although employees must also follow safety procedures.
If a worker discovers a frayed electrical cord during routine inspection, what is the correct action?
Unplug the equipment, tag it out, and report for repair
Ignore it until the next scheduled maintenance
Wrap it with regular tape and keep working
Continue using it carefully
The correct procedure is to de-energize the equipment, tag it out of service, and report it for proper repair. Continuing use or temporary fixes like tape pose serious shock and fire hazards.
Before entering a confined space, what procedure must be performed to ensure a safe atmosphere?
Swab the floor for pathogens
Lock the door behind you
Conduct gas monitoring
Use a fire extinguisher
Gas monitoring measures oxygen levels, flammable gases, and toxic substances to ensure it is safe to enter. Fire extinguishers, pathogen swabs, and locking doors do not address atmospheric hazards in confined spaces.
What fire extinguisher class is specifically designed for electrical fires?
Class C
Class A
Class B
Class D
Class C extinguishers are intended for use on energized electrical equipment. Class A is for ordinary combustibles, B for flammable liquids, and D for combustible metals, making them unsuitable for live electrical fires.
When a trip hazard is identified in a corridor, what is the first action a supervisor should take?
Remove the hazard and cordon off the area
Report it at the next safety meeting
Document it and leave it until end of shift
Instruct workers to walk around without addressing it
The supervisor must promptly remove or isolate the hazard and secure the area to prevent injuries. Delaying action or merely reporting it later fails to mitigate immediate risk.
Which system establishes a standardized chain of command and common terminology for managing major emergency responses?
Risk Management Framework (RMF)
Behavioral Safety Program
Incident Command System (ICS)
Job Safety Analysis (JSA)
The Incident Command System (ICS) provides a scalable structure and standard terminology for emergency management. JSAs analyze specific tasks, RMF is for information security, and behavioral safety focuses on worker actions.
Which section of the Safety Data Sheet (SDS) specifies recommended personal protective equipment and engineering controls?
Section 2
Section 11
Section 8
Section 5
Section 8 of the SDS details exposure controls and personal protective equipment. Section 2 covers hazard identification, Section 5 emergency measures, and Section 11 toxicological information.
A noise exposure survey shows an average level of 95 dBA over an eight-hour shift. According to OSHA, which actions are required?
Only post warning signs
Require daily medical exams
Provide hearing protection and implement engineering controls
No action needed below 100 dBA
OSHA mandates providing hearing protection at exposures above 85 dBA and seeking engineering controls to reduce noise at 95 dBA. Posting signs alone is insufficient, and daily medical exams are not required by this standard.
Under the Globally Harmonized System (GHS), which pictogram indicates a serious health hazard such as respiratory sensitization?
Silhouette of a person with a star on the chest
Exclamation mark
Skull and crossbones
Flame
The health hazard pictogram shows a human silhouette with a star on the chest and denotes respiratory sensitizers, carcinogens, and other chronic hazards. The flame indicates flammability, the exclamation mark less severe hazards, and the skull indicates acute toxicity.
According to OSHA's Lockout/Tagout standard (29 CFR 1910.147), which practice is non-compliant?
Updating procedures after equipment changes
Training employees on lockout/tagout
Re-energizing equipment without authorization
Verifying isolation before maintenance
Re-energizing equipment without proper authorization violates the lockout/tagout standard and exposes workers to unexpected energy release. Verifying isolation, procedure updates, and training are all required compliant practices.
0
{"name":"Which of the following is considered a physical hazard in the workplace?", "url":"https://www.quiz-maker.com/QPREVIEW","txt":"Which of the following is considered a physical hazard in the workplace?, Which piece of personal protective equipment is most appropriate for protecting the respiratory system against dust?, What does the color red typically signify on workplace safety signage?","img":"https://www.quiz-maker.com/3012/images/ogquiz.png"}

Learning Outcomes

  1. Identify common workplace hazards and risks.
  2. Apply safety protocols to real-world scenarios.
  3. Demonstrate proper use of personal protective equipment.
  4. Analyse emergency procedures and response strategies.
  5. Evaluate compliance with health and safety regulations.
  6. Master best practices for maintaining a safe work environment.

Cheat Sheet

  1. Recognize Common Workplace Hazards - Think like a safety detective and scan for chemical spills, exposed wires, or heavy objects that could cause harm. Early recognition helps you dodge trouble before it even begins.
  2. Implement Safety Protocols - Follow proven procedures for handling equipment, storing materials, and reporting incidents to keep risks at bay. Consistency is key: the more you practice these routines, the more automatic - and safe - they become.
  3. Utilize Personal Protective Equipment (PPE) - Gear up with gloves, helmets, goggles, or respirators to shield yourself from specific dangers like sparks or flying debris. PPE is your personal safety sidekick, giving you that extra layer of protection.
  4. Understand PPE Limitations - Remember that PPE is the final line of defense, not a magical suit that makes you invincible. Always pair it with good work habits, proper training, and hazard elimination.
  5. Maintain and Inspect PPE Regularly - Give your gloves, goggles, and masks a quick once-over before each use to spot cracks, tears, or wear. Keeping your equipment in top shape guarantees it'll be ready when you need it most.
  6. Follow Emergency Procedures - Learn evacuation routes, first-aid steps, and alarm signals so you can spring into action if something goes sideways. Practice makes perfect - regular drills turn panic into confidence.
  7. Comply with Health and Safety Regulations - Stick to OSHA standards, state rules, and your company's safety policies to keep everyone on the right side of the law. Compliance isn't just paperwork - it's your ticket to a safer, smoother workplace.
  8. Participate in Safety Training - Jump into workshops, online courses, and hands-on demos to sharpen your safety skills and stay updated on new techniques. Training sessions are the perfect time to ask questions and learn from real-world examples.
  9. Promote a Safety Culture - Chat openly about hazards, share tips with teammates, and celebrate safety wins to build an environment where everyone looks out for each other. A positive safety vibe keeps morale high and accidents low.
  10. Stay Informed on PPE Developments - Keep an eye on research, new gear designs, and technological breakthroughs to upgrade your safety arsenal. The next great advancement might make your job safer and more comfortable!
Make a Quiz (FREE) Copy & Edit This Quiz Create a Quiz with AI

Human Resources Quizzes

Powered by: Quiz Maker