Quiz
Precision in Performance: Test Your Knowledge
Welcome to our comprehensive quiz designed to test your understanding of vehicle regulations, performance metrics, and technical standards in competitive racing. Whether you're a seasoned racer or just starting, this quiz will challenge your knowledge and enhance your skills.
Key Features:
- Multiple-choice questions
- Focused on technical details and standards
- Perfect for teams and individual racers
Points for skid pad, Autocross, Endurance are as follows:
75, 100, 325
75, 100, 225
85, 100, 325
None of the above
Fueling may only take place at fuel station and must be conducted by officials or Technical responsible person only.
True
False
He VSV will be reviewed in order of submission. A review may take up to a month.
True
False
No part of the vehicle may enter a keep-out-zone defined by two lines extending vertically from positions ___________ in front of and ________ behind the outer diameter of the front and rear tires in the side view of the vehicle, with steering straight ahead
75mm and 75mm
85mm and 75mm
75mm and 65mm
None of the given options
No part of the front hoop can be tilted more than ______ from vertical in side view.
20°
10°
18°
25°
The main hoop and main hoop braces must not be on the same side of a vertical line that runs through the top of the main hoop in side view.
True
False
Additional rearward-extending supports aren't necessary if the front hoop is tilted more than 10 degrees to the rear.
True
False
Any alternate material for the front bulkhead must have the same perimeter shear strength as a _____ thick steel plate.
1.50mm
1.55mm
1mm
2mm
Nylon locknuts used for low temperature applications are
ISO 7040, ISO 10512, EN 1663
ISO 7040, ISO 10512, EN 166
ISO 7040, ISO 10512, EN 1662
ISO 7140, ISO 10512, EN 1663
All threaded critical fasteners, including fine-pitch thread variants, must be hexagon bolts or socket head cap screws should be of certain rating_________ .
ISO 4017, ISO 4014 for hexagonal type and ISO 4762, DIN7984, ISO 7379 for socket head cap screws
ISO 4017, ISO 4014 for hexagonal type and ISO 4762, DIN7984, ISO 8379 for socket head cap screws
ISO 4017, ISO 4014 for hexagonal type and ISO 4762, DIN7994, ISO 7379 for socket head cap screws
None of the given options
When the power is turned off, the electronic throttle must close to at least ____ of the idle position.
±5%
±2%
±3%
±1%
In autocross, Every team that completes at least one run without a DNF or DQ receives 5 points.
False
True
Vehicles must pass all technical inspections in order to use the practise track.
True
False
During all dynamic events, only two set of tyres per kind (dry/wet) may be used. This restriction does not apply to the braking test, practise area, or static events.
False
True
If the vehicle fails the test after two attempts, it must be fixed and then retested.
True
False
{"name":"Quiz", "url":"https://www.quiz-maker.com/QPREVIEW","txt":"Welcome to our comprehensive quiz designed to test your understanding of vehicle regulations, performance metrics, and technical standards in competitive racing. Whether you're a seasoned racer or just starting, this quiz will challenge your knowledge and enhance your skills.Key Features:Multiple-choice questionsFocused on technical details and standardsPerfect for teams and individual racers","img":"https://cdn.poll-maker.com/104-5107448/img-gvbphcranpx6geyvbfqakiuy.jpg"}
More Quizzes
Automotive Safety Compliance Quiz
1588
Ruel book quiz
15825
QUIZZ BISS
15812
Rulebook Test
1589
16_12_FSG_KW50
10518
Automotive Safety and Design Regulations Quiz
15818
RuleBook Quiz-1
10513
Ultimate Vehicle Knowledge Quiz
15817
Automotive Knowledge Quiz
1165
Rulebook Test
15822
Automotive Safety Regulations Quiz
15817
FSG#312
10512