QUIZELLA 1
Automotive Safety and Compliance Quiz
Test your knowledge of automotive safety regulations and compliance in our engaging quiz! This quiz is designed for automotive enthusiasts, engineers, and students looking to deepen their understanding of vehicle safety standards.
Topics covered include:
- Brake systems
- Aerodynamic devices
- Chassis requirements
- Vehicle design regulations
Unarmored plastic brake lines
Are allowed
Are prohibited
Can be used
Mechanically Attached Roll Hoop Bracing Spherical rod ends are prohibited.
True
False
Not relevent
The pitch deck must be submitted online via
Team’s official email
Competition website
Google docs
Post
All aerodynamic devices must not extend further rearward than __ mm from the rearmost part of the rear tires
500 mm
250 mm
200 mm
700
All edges of the bodywork that could come into contact with a pedestrian must have a minimum radius of
1 mm
2 mm
3 mm
5 mm
The brake pedal must be fabricated from
Titanium
Carbon Fibre
Iron
The cockpit shutdown button must have a dia of
Min 40 mm
Min 24 mm
Min 50 mm
The upper member must connect the main hoop and the front hoop. It must be at a height between ___mm and ___ mm above the lowest inside chassis point between the front and main hoop.
320, 240
240, 320
340, 220
The function of positive stops on the reck is
Limit the steering freeplay
Prevent rack displacement
Prevent the wheels and rims from contacting other parts
All of the above
All aerodynamic devices rearward of a vertical plane through the rearmost portion of the front face of the driver head restraint support, excluding any padding, set to its most rearward position must be
Lower than 1.2 m from the lowest chassis member
Lower than 500mm
Lower than 700mm
None of these
What does IMD stands for
Insulation Monitoring Device
Insulating monitored device
Insulating monitored device
Insulated monitoring device
Insulated monitoring device
150
200
100
350
Which one is incorrect
The gas lines and fittings must be appropriate for the minimum possible pressure of the system
The axis of the gas cylinder/tank must not point at the driver
The gas cylinder/ tank must be insulated from any heat sources.
None of the above
Regarding the submission of group A and B documents. How many points can be deducted for each deadline
Max 100
Max 80
Max 70
Max 35
The vehicle must be equipped with one brake light that is illuminated if and only if
Brakes are applied
Hydraulic system is actuated
Bots is activated
{"name":"QUIZELLA 1", "url":"https://www.quiz-maker.com/QPREVIEW","txt":"Test your knowledge of automotive safety regulations and compliance in our engaging quiz! This quiz is designed for automotive enthusiasts, engineers, and students looking to deepen their understanding of vehicle safety standards.Topics covered include:Brake systemsAerodynamic devicesChassis requirementsVehicle design regulations","img":"https:/images/course8.png"}