Rule book quiz

A detailed image of a race car with various mechanical components labeled, surrounded by safety gear like helmets and fire extinguishers, in a vibrant racing environment.

Rule Book Quiz

Test your knowledge of the rule book with this engaging quiz! Designed for enthusiasts and participants, the quiz covers a range of regulations and requirements.

Challenge yourself with questions on:

  • Vehicle specifications
  • Safety equipment
  • Dynamic event rules
  • Inspection requirements
15 Questions4 MinutesCreated by CheckingRules101
OC
Off-count
On-course
Off-card
Off-course
The penalty points for EDP per 24 hr is ______
12 points
10 points
5 points
15 points
Allowable steering system free play is limited to a total of _______ measured at the steering wheel.
10°
IIn Laminate testing,The distance between the two test panel supports must be at least ________
0.4 m
400 mm.
Both a & b
500 mm.
Mounting plates welded to the roll hoops must be at least_______ thick steel or _______thick aluminum, dependent of the roll hoop material.
5 mm,3 mm
2 mm,4 mm
2 mm,3 mm
3 mm,3 mm
The minimum width of the scatter shield should be at least three times the width of the chain or belt For metallic chains and belts __________
2 mm steel
3 mm steel
3 mm alluminium alloy
2 mm aluminium alloy
Adjustable tie-rod ends must be constrained with a jam nut to prevent loosening.
False
True
Sensors and components may come into contact with the driver‟s helmet under any circumstances.
False
True
Each team must have a removable device (called the quick jack) that lifts up the vehicle, so that all driven wheels are at least________ off the ground and the vehicle is adequately supported.
200 mm
50 mm
150 mm
100 mm
The fuel tank must be located within the rollover protection envelope, except the fuel filler neck if it is ________ above the ground
350 mm
400 mm
300 mm
370 mm
The following items must be presented for pre-inspection:
All helmets
All driver‟s equipment and other safety gear
Two unused and in date fire extinguishers
All of the above
The scoring of the cost and manufacturing finalists will vary from _________points.
175 to 111
150 to 120
170 to 111
100 to 86
An individual driver may drive in more than two dynamic events.
False
True
The driver must pull into the driver change area for a mechanical inspection of the vehicle, something has been observed that requires a closer inspection.
GREEN FLAG WITH ORANGE DOT
RED FLAG WITH ORANGE DOT
BLACK FLAG WITH YELLOW DOT
BLACK FLAG WITH ORANGE DOT
Each team has ______runs, driven by______ drivers with_____ runs each.
Four , two, one
Four , two, two
Three , two, two
Four , one , two
{"name":"Rule book quiz", "url":"https://www.quiz-maker.com/QPREVIEW","txt":"Test your knowledge of the rule book with this engaging quiz! Designed for enthusiasts and participants, the quiz covers a range of regulations and requirements.Challenge yourself with questions on:Vehicle specificationsSafety equipmentDynamic event rulesInspection requirements","img":"https:/images/course8.png"}
Powered by: Quiz Maker