Quality Workstation - 20 Questions - Alternative | Take the Quiz

What are the main responsibilities for the Quality Station?

Ensuring each part has been damaged

Ensuring each part has been Allocated, Measured and Photographed properly

Ensuring that each part makes it back to the client

Ensuring that each pallet is stored properly

You notice that your coworker in the Oversize station is not wearing their steel-toe boots. What action should you take?

Politely remind them to wear their boots for safety reasons, if they do not comply, alert your supervisor

Ignore it

Take your boots off too

Continue to process parts normally

Under the Measurement Allocation section, if a part is incorrectly assigned a Problematic Group, what action would you take to correct that?

Click the "Reject" button and select the proper Problematic Group

Reject the part and alert your Supervisor

Validate the part and move on

Place the part in the Pseudo-Pallet

When is a beverage allowed in the Quality workstation?

Always

Always, as long as it has a screw on cap

Once a week

Never

When a part is classified under a Problematic Group or Special Analysis Category there is a second measurement that must be performed, what is it?

Box-Size Measurements

In-Box Measurements

Outside the Box Measurements

Length and Weight only

Margery has processed many parts today, she has cleaned up her workstation and placed all tools in their proper area. She did all of this while singing along to her favorite band with her headphones in all day. Did Margery follow all of the rules?

Yes

No - Headphones are never allowed

No - She had her music up too loud

Yes - Headphones are allowed as long as the music isn't too loud

Before the final Validation, what must you do with the part?

Check for damage

Correct the part number

Repackage the part

Place the part in its original pallet

A good process for repacking a pallet at the Quality station would be...

Throw the parts in the pallet

Stack all of the parts as high as you can

Stack the parts efficiently and be sure that the heavy parts are at the bottom

Put the heavy parts on top so it holds the rest of the parts firmly in place

After the final Validation, what should you do with the part?

Place the part in the assigned Pseudo-Pallet

Take the part to Allocation

Place the part on the Rejection cart

Place the part back on the line

After a pallet is complete, what action should you take?

Alert the forklift driver that the pallet can be moved to storage

Continue processing parts as normal

Move to a new workstation

Take a break

Once all parts in a pallet have been processed, what will we need in order to audit the Pseudo-Pallet?

The Pallet label

The Packing list

Pictures of the Pallet

The Pallet list

If a part is too heavy to move to the workstation alone, what action should you take?

Ask your supervisor to provide you with help

Try harder

Skip that part

Inspect the part on the ground

What is the purpose of assigning a color to each pallet?

To help track parts as they make their way down the line

To have nice colors on the line

To ensure that we measure parts properly

No reason, just because

If a part's measurements are incorrect, what action should you take?

Ignore it

Enter new measurements

Click the reject button, select the measurement(s) that are incorrect and select a reason

Click Validate

When Repackaging your part, what is our goal for the parts condition?

Have the part look really nice

Have the part appear only slightly used

Have the part damage hidden

Have the part go back to the client the same way it was sent to us

You notice one of a part's pictures are blurry. What action should you take?

Validate the pictures, they're good enough

Click reject, select the picture that is blurry and select a reason for rejection

Take a new picture and upload it to the Exaparts system

Move on to the next section

From the desktop, which folder do we open to transfer our pallet pictures into?

Allocation Folder

Quality Folder

SD Card Folder

Import Folder

You notice that the part number displayed in the Exaparts system does not match the part number on the part. What actions should you take?

Ignore it

Change the part number on the part itself

Tell your supervisor

Click "modify reference" and make any changes necessary to the part number

After Validating your Pallet Closure photos, you'll be prompted to print the Packing list. What should you do with this Packing list?

Throw it away

Tape it to the top of the Pallet

Print it and then attach it to the back of the Pallet label using a stapler

Write your initials and the date on it

If any section of the part review is rejected, what action should you take?

After the final validation, place the part in the pseudo-pallet

After final validation, place the part at the Identification workstation

After the final validation, place the part on the rejection cart at the first workstation that has been rejected for this part

Throw the part away, it's useless

Unlock and Upgrade

Remove all limits from your Quizzes

Quality Workstation - 20 Questions - Alternative

More Quizzes