Safety and Compliance Quiz

A well-lit mechanical workshop with metal cutting equipment and vehicles in the background, safety gear prominently displayed, highlighting operational safety and compliance standards.

Safety and Compliance Quiz

Test your knowledge on safety regulations and operational standards in metal cutting and vehicle dynamics. This comprehensive quiz is designed for students and professionals alike to ensure adherence to best practices.

14 multiple choice questions
Covering topics from equipment safety to fuel line standards
Improve your understanding and readiness for practical applications

15 Questions4 MinutesCreated by CuttingEdge24

Engine running is allowed in the engine test area and in the dynamic area, when the following conditions are met:

The vehicle must have passed mechanical inspection

Someone is allowed under the vehicle while the engine is running

Driven wheels can only remain fitted to the vehicle if they will not rotate

Both A&C

The distance between the two test panel supports must be ________ .

At least 200 mm

At most 400 mm

At most 250 mm

At least 400 mm

Students who have already graduated from a degree program and are seeking another degree of the same level or below are not allowed to participate.

True

False

A fire resistant one piece suit, made from a minimum of two layers that covers the body from the neck down to the ankles and the wrists. The suit must be certified to one of the following standards and be labeled as such:

SFI 2-3A/5 (or higher)

SFI 3.5/5 (or higher)

Both A&B

None of these

All protests must be filed in writing and presented to the officials by the team_______ . In order to have a protest considered, a team must post a __ point protest bond which will be forfeited if their protest is rejected.

Captain, 20

Vice-captain, 25

Manager, 25

Captain, 25

Fuel lines between fuel tank and fuel rail and return lines must have:

Reinforced rubber fuel lines or hoses with an abrasive protection with a fuel hose clamp which has a full 360° wrap, a nut and bolt system for tightening and rolled edges to prevent the clamp cutting into the hose

Metal braided hoses with crimped-on or reusable, threaded fittings

Both A&B

None of the given

The foremost part of the vehicle is staged ______ behind the starting line. Vehicles will accelerate from a standing start.

0.30 mm

0.3 m

0.25 m

0.5 mm

Minimum area moment of inertia for main and front hoops, shoulder harness mounting bar should be _________ .

11300 mm4

11320 mm2

12000 mm3

11320 mm4

In acceleration ______ points are awarded to every team that finishes at least one run without a DNF or DQ.

3.0

2.5

3.5

All High pressure fuel lines must be stainless steel rigid line or Aeroquip FC807 smooth bore PTFE hose with stainless steel reinforcement and visible Nomex tracer yarn. Use of elastomeric seals are not prohibited. Lines must be rigidly connected every 100 mm by mechanical fasteners to structural engine components.

True

False

The following items must be presented at mechanical inspection:

The vehicle in ready-to-race condition

Copies of any safety structure equivalency forms

Copies of any impact attenuator data requirement

All of these

Any tubing with a wall thickness _____ mm or a minimum area moment of inertia _____ mm4 is considered non-structural and will be ignored when assessing compliance to any rule regarding the vehicle structure.

<1.2mm, <6695 mm4

>1.5 mm, >6690 mm4

>1.2mm, >6695 mm4

<1.5 mm, <6690 mm4

Safety and Compliance Quiz

Safety and Compliance Quiz

More Quizzes