RB quiz

A vibrant image showing a racing vehicle in motion on a track, with a focus on unique vehicle components and racing safety gear, illustrating the excitement of automotive engineering and competition.

RB Quiz: Test Your Knowledge

Welcome to the RB Quiz, designed to challenge your understanding of racing regulations and vehicle specifications. Whether you're a seasoned participant or a newcomer to the racing world, this quiz will help you sharpen your knowledge and prepare for the competition.

Take a moment to see what you can achieve!

  • 10 engaging questions
  • Multiple choice and checkbox formats
  • Instant feedback on your answers
10 Questions2 MinutesCreated by FastTrackFan123
Which of the following statements are true ?
If a team engages in unsportsmanlike conduct, 25 penalty points will be subtracted from their total score. If there is a second violation, the team will be expelled from the competition.
If the front hoop is inclined more than 10° towards the rear, additional braces extending rearwards are necessary.
Teams will be prioritized based on their arrival time at the acceleration event, with first-time participants receiving priority.
All tire changes after a vehicle has received the green flag to start the endurance event must take place in the pits.
Which of the following statements in context to 'Vehicle Identification' are false.
The name of the university must be displayed and written in Roman Sans-Serif characters of at least 50 mm high on both sides of the vehicle.
Ensure the characters are easily discernible from a distance and positioned against a backdrop with strong contrasting colors.
For the vehicle number the height of the character must be at least 100mm high
None of the given option
Which of the following statements are true in context with 'Cockpit Opening'
The template must be cleared until it reaches a height of 320 mm above the lowest point inside the chassis, located between the front and main hoop, if the side impact structure does not consist of tubes.
The template can only fit if the steering wheel, seat, and all padding are removed. Integrated parts with the steering wheel can be removed as well, but no other parts should be removed.
Both options are incorrect
Which of the following statements are true in context with 'Master Switches'
The master switches (refer to T11.3 and EV6.2) be a rotary mechanical switch with a removable red handle.
The height of the center of any master switch should be equal to or greater than 70% of the vertical distance from the ground surface to the center of the middle circle of the template (refer to T4.3).
The “ON” position of the switch must be in the horizontal position and must be marked accordingly.
None of the given options are true.
Which of the following is True for "Engineering Design Scoring"
Round 1 (CGM) shall constitute a total of 35 points.
Round 2 (VED) shall constitute a total of 65 points
Round 3 (Finals) shall constitute a total of 50 points
The overall engineering design event maximum scoring is 100 points for CV/EV
GREEN FLAG
After allowing a faster vehicle to pass, the driver is permitted to re-enter the track using the slow lane.
Once the session begins, the driver is allowed to enter the course with the guidance of track marshals. If the vehicle stalls, it can be restarted, but the driver must wait for another green flag as the opportunity to join the traffic may have passed.
€ The session has been completed. The driver must exit the course at the first opportunity.
None of the given options are correct
For Autocross scoring, 3.5 points are awarded to every team that finishes at least one run without DNF or DQ.
True
False
The vehicle must be equipped with fully operational front and rear suspension systems including shock absorbers and a usable wheel travel of at least _____ and a minimum jounce of ________ with driver seated
50 mm and 15 mm
50 mm and 25 mm
40 mm and 25 mm
60 mm and 15 mm
The following items must be presented at mechanical inspection
The vehicle in ready-to-race condition
Quick jack and push bar
The tallest driver of the team
Print-outs of rule questions (if applicable)
For Roll Bar Padding, Any portion of the roll bar, roll bar bracing or chassis which might be contacted by the driver's helmet must be covered with a minimum thickness of 12 mm of padding which meets SFI spec 45.1 or FIA 8857-2001.
True
False
{"name":"RB quiz", "url":"https://www.quiz-maker.com/QPREVIEW","txt":"Welcome to the RB Quiz, designed to challenge your understanding of racing regulations and vehicle specifications. Whether you're a seasoned participant or a newcomer to the racing world, this quiz will help you sharpen your knowledge and prepare for the competition.Take a moment to see what you can achieve!10 engaging questionsMultiple choice and checkbox formatsInstant feedback on your answers","img":"https:/images/course2.png"}
Powered by: Quiz Maker