Rulebook Test
Rulebook Test Quiz
Test your knowledge of the competition rulebook with our engaging Rulebook Test Quiz. Perfect for teams preparing for events, this quiz covers important regulations and specifications that every participant must know.
- Assess your understanding of safety standards.
- Challenge yourself with multiple-choice questions.
- Improve your team's readiness for competition day.
Team members must be enrolled as degree seeking UG or graduate students in any university. Team members who have graduated within the __________ month period prior to the competition remain eligible to participate.
9
10
11
12
The front bulkhead support is part of a composite structure, it must have equivalent EI to the sum of the EI of the six baseline steel tubes that it replaces and it must not be counted towards the composite front hoop bracing structures for the structural equivalency documentation.
Two
Seven
Six
Nine
Which of the following statement is TRUE?
Any aerodynamic device must be able to withstand a force of 200 N distributed over a minimum surface of 225 cm2 and not deflect more than 10 mm in the load carrying direction.
Any aerodynamic device must be able to withstand a force of 200 N distributed over a minimum surface of 225 m2 and not deflect more than 10 mm in the load carrying direction.
Any aerodynamic device must be able to withstand a force of 200 N distributed over a minimum surface of 225 cm2 and not deflect more than 100 mm in the load carrying direction.
Any aerodynamic device must be able to withstand a force of 200 N distributed over a minimum surface of 225 cm2 and not deflect less than 10 mm in the load carrying direction.
Which of the following statement is TRUE?
The steering wheel must have a continuous perimeter that is near circular or near oval. The outer perimeter profile may have some straight sections, but no convex sections
If the harness is mounted to a tube that is not straight, the joints between this tube and the structure to which it is mounted must be reinforced in side view by triangulation tubes to prevent torsional rotation of the harness mounting tube.
Documents and videos that are largely incomplete or not readable will not be considered as not submitted.
The electronic throttle must use at least one source of energy capable of returning the throttle to the closed position..
Finger guards are required to cover any drivetrain parts that spin while the vehicle is moving with the engine running
FALSE
TRUE
All circuits that are part of the shutdown circuit must be designed in a way, that in the energized/connected state they open the shutdown circuit.
TRUE
FALSE
After passing the noise test the function of the _________ will be tested.
Master switch
Inertia switch
Cockpit-mounted shutdown button
All of the above
The brake light must meet the following requirements:
A red light with a white background
Clearly visible from the rear in very bright sunlight
Minimum shining surface of 25 cm2 with even luminous intensity
When LED lights are used without a diffuser, they may not be more than 15 mm apart
Which of the following statement is TRUE?
The BPP finals will be a public event at the competition.
Prior to the tilt test specified in IN7, engines fitted with mechanically actuated fuel pumps must be run to fill and pressure the system upstream of the high pressure pump.
The data logger must be in an easily accessible location so that it is possible to insert, remove or replace it within 25 min in ready to race condition.
Which of the following statement is false for Green Flag ?
The session has started, the driver may enter the course under direction of the track marshals. In case of stalling, the vehicle can be restarted, but the driver has to await another green flag as the opening in traffic may have closed.
The driver is clear to re-enter the track after using the fast lane to let a faster vehicle pass.
The driver may pick up speed again after a yellow flag was displayed.
The foot pedal must return to the 0% position when not actuated. The foot pedal must have a positive stop preventing the mounted sensors from being damaged or overstressed. Two springs must be used to return the foot pedal to the 0% position and each spring must work when the other is disconnected. Springs in the APPS are accepted as return springs.
FALSE
TRUE
The starting order is based on the time the team arrives at the skidpad event. Teams on their 2nd run will receive priority.
CORRECT
INCORRECT
BA stands for:
Berufsakademie
Berufsakademe
Berufsakidemie
Berofsakademie
Fire resistant underwear (long pants and long sleeve t-shirt). This fire resistant underwear must be made from acceptable fire resistant material as listed in T13.3.11 and must cover the drivers body completely from neck down to ankles and elbow..
TRUE
FALSE
Master switches must be located on the right side of the vehicle, in proximity to the main hoop, at the 95th percentile female driver‟s shoulder height, as defined in T4.3, and be easily actuated from outside the vehicle
FALSE
TRUE
{"name":"Rulebook Test", "url":"https://www.quiz-maker.com/QPREVIEW","txt":"Test your knowledge of the competition rulebook with our engaging Rulebook Test Quiz. Perfect for teams preparing for events, this quiz covers important regulations and specifications that every participant must know.Assess your understanding of safety standards.Challenge yourself with multiple-choice questions.Improve your team's readiness for competition day.","img":"https:/images/course8.png"}
More Quizzes
Rulebook Test
15820
Engineering Safety Standards Quiz
1589
Formula bharat
1588
Rulebook FB24
1589
Rulebook Quiz(Om)
1587
Automotive Safety Compliance Quiz
1588
Automotive Safety and Design Regulations Quiz
15819
Rulebook Mock 2
15833
Rulebook Test
1587
Chassis (RuleBook T1-T7)
10519
Formula bharat
1585
Rulebook test ENGINE dept
10512