MOCK TEST
Aerodynamic Device Compliance Quiz
Test your knowledge on the crucial requirements for aerodynamic devices and competition regulations! This quiz covers various critical topics to ensure safety and compliance in automotive engineering.
Expect questions on:
- Force specifications
- Brake system requirements
- Fire safety standards
- Material specifications
Any aerodynamic device must be able to withstand a force of _____ distributed over a minimum surface of _____ and not deflect more than ____ in the load carrying direction.
200KN, 225cm², 10mm
200N, 225cm², 100mm
0.2KN, 0.225 m², 10mm
200N, 0.0225m², 1cm
Which of the following elements must not be expanded on as a part of the pitch deck
Problem Statement and Solution
Team and Competition
Product ans Marketb Size
Funds and Contacts
If the vehicle is unable to pass the Brakes test after three attempts, the vehicle must be repaired and then brought back for retesting.
True
False
The LVMS must be mounted in the____ of a completely ____ circular area of _____ diameter placed on a high contrast background.
Right / red / less or equal to 50mm
Middle / red / less or equal to 50m
Middle / red / less or equal to 5cm
Middle / red / less than 0.005
For laminate testing the distance between the two test panels must be ____________
At most 40 cm
At least 40 cm
At least 0.04 m
More than 400mm
The brake system must have ___ a dependent hydraulic circuits such that in the case of a leak or failure at any point in the system, effective braking power is maintained on at least two wheels.
One
Two
Three
None of the above
The supporting document is limited to a maximum of 50 pages, including the cover page and the Table of Contents.
True
False
Each team must have at least one dry chemical/dry powder fire extinguishers with a minimum firefighting agent capacity of____
0.9 kg
1 kg
900 grams
None of the above
Team briefing are conducted for:
Captain and drivers
Team members
Drivers
Captain, Vice Captain and Drivers
The competition technical inspection stickers will be placed on the ________ of the vehicle.
Dashboard
Main hoop
Nose
Side impact structure
For sleeved joints the sleeve must have a ____________ length of 38 mm either side of the joint
Not more than
Maximum
At least
Not mentioned in rulebook
Throttle cables must be located _____from any exhaust system component.
At most 50mm
At least 0.05m
At least 0.5cm
At least 0.005m
If the CRD is not identical with the uploaded version
It is not evaluated
Elimination from the cost event
Deduction of 5 points from the cost event score
Deduction of 5 points from the overall score
If a team is not present and ready to compete at the scheduled time, they forfeit attempt at that event.
True
False
Steel tubing has to be made from unalloyed carbon steel with a maximum content of 0.3% carbon_____________ and _______ of any other element
17/10 %Mn & 4/5%
1.7 % Mg & 0.6%
170/100 %Mn & 3/5%
1.7 % Mn & 3/6%
{"name":"MOCK TEST", "url":"https://www.quiz-maker.com/QPREVIEW","txt":"Test your knowledge on the crucial requirements for aerodynamic devices and competition regulations! This quiz covers various critical topics to ensure safety and compliance in automotive engineering.Expect questions on:Force specificationsBrake system requirementsFire safety standardsMaterial specifications","img":"https:/images/course8.png"}
More Quizzes
QUIZZELLA 2
1589
Air Brake Manual Chapter 6
15821
Rulebook Q2(om)
1586
Brake System Knowledge Quiz
1167
Rulebook Mock 3
15830
Engineering Knowledge Challenge
9430
Automotive Safety Standards Quiz
15821
Air Brake Manual Quiz (Complete Summary)
18910
QUIZELLA 1
1589
FSG#119_DONE 26.12.2020
1680
FSG#308
14715
RuleBook Quiz
10516