Mock test 3
Mock Test 3: Challenge Your Knowledge
Welcome to the Mock Test 3 quiz, designed to assess your understanding of important concepts in various categories. This quiz consists of multiple choice questions that cover a range of subjects, ensuring a comprehensive evaluation of your knowledge.
Prepare yourself for:
- 15 thought-provoking questions
- A chance to compare your knowledge with others
- A deeper understanding of the quiz topics
Winners of the above categories will receive physical awards by ______.
Certificates
Post
Trophies
Mail
Business Plan Pitch Deck Template Available on site?
Yes
No
EAIR
ESF Add Item Request
Electrical authority request
Add Item Request
Electrical add item request
The width of the shoulder harness test sample must not be any ________ than the shoulder harness panel height used to show equivalency for the shoulder harness mounting bar.
Lower
Wider
Shorter
Longer
Taller
A heat resistant, conduction insulation material with a minimum thickness of :
2 mm if aluminum
3 mm if steel
8 mm
Both A and B
When a HANS device is used by the driver, FIA certified ______ shoulder harnesses are allowed.
50 mm wide
Minimum 2m length
Minimum 5cm thick
Minimum 5m length
Scatter shields and their mountings must be constructed of ________2 mm steel or 3 mm aluminum alloy 6061-T6.
Minimum
Perforated
Non-perforated
Maximum
All aerodynamic devices higher than 500 mm from the ground, must not extend______ of the most ______point of the rear wheel/tire.
Inboard / outboard
Outboard / inboard
Outboard / outboard
Inboard / inboard
If an plausibility occurs between the values of the APPSs and persists for more than 100 ms.
True
False
Incorrect EDP link within ED supporting document :
25 points penalty
DR
Considered as non-submission
10 points penalty
A fire resistant one piece suit, made from a ________layers that covers the body from the neck down to the ankles and the wrists
Min one
Min two
Max three
Max 1
A permanent, non-moveable, clear and easily visible fuel level line must be located between 12 mm and 25 mm _______ of the visible portion of the sight tube.
Below
Below the permitted level
Below the top
Top of below
Violation of the rules with advantage for the team.
Group D
Group A
Group C
Group B
In Skidpad event, the inner circles are _____ in diameter and the outer circles are ____ in diameter.
18.25 m / 21.25 m
15.25 m / 21.25 m
21.25 m /15.25 m
21.25 m / 18.25 m
Only ____ team members may enter the driver change area.
2
3
1
4
{"name":"Mock test 3", "url":"https://www.quiz-maker.com/QPREVIEW","txt":"Welcome to the Mock Test 3 quiz, designed to assess your understanding of important concepts in various categories. This quiz consists of multiple choice questions that cover a range of subjects, ensuring a comprehensive evaluation of your knowledge.Prepare yourself for:15 thought-provoking questionsA chance to compare your knowledge with othersA deeper understanding of the quiz topics","img":"https:/images/course8.png"}
More Quizzes
FB 2020
311619
Building Code Quiz 1
11616
RuleBook T1-T10
10517
Formula bharat rule book practice quiz
1588
Rulebook 2
15813
Rulebook test ENGINE dept
10511
Contractor Qualification Refresher Quiz
17810
Module 1 - Project Safety Setup
11618
Formula bharat
1586
Mock exam
40200
"Project Management" "Project" - take the quiz
201029
PMO Term of the Week - The Big Friday Quiz
1058